Boat Outfitting

VDO SingleViu 52mm (2-1/16") Ammeter - 150 AMP SingleViu instruments represent the latest technology in instruments, and offer a top of the line solution by being able to work directly with traditional analog senders or work directly off a J1939 CAN network. Each SingleViu gauge has it's own microprocessor, which allows it to have a dual-input capability that can be switched from it's default analog input to J1939 CAN via the SingleViu Configuration software . Each speedometer or tachometer can also the display the J1939 system fault codes. These features, along with waterproof and fog proof construction, RGB LED illumination and advanced stepper motors make SingleViu the ideal solution when traditional gauges are needed or desired.*60mV Shunt RequiredFeatures: 60mV Default Input  RGB LED Illumination (default illumination set to White)  Water Resistant Front & Rear  Includes Wire Harness Voltage 12-24V Molex MX 150 8 Pin Connector Spin-Lok™ Mounting Hardware Analog Input ∗Sold as an Individual WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Voltage - Input Range (Volts): 12-24V Series: SingleViu Gauge Type: Voltmeter/Ammeter Gauge Size: 52mm Box Set: No Box Dimensions: 4"H x 4"W x 6"L WT: 0.45 lbs UPC: 4103590682918 Owner's Manual (pdf)

Read more less

PowerPod Pre-Cut for Garmin GPSMAP 1042xsv/1022xsv/1022 PowerPods are better than bracket mounting. Sturdy and secure, yet clean and attractive, PowerPods position your fishfinder/chartplotter at a 20-degree viewing angle. PowerPods provide the clean look of flush mounting with the advantages of a swivel base.PowerPods are now available in two color options. All models are available in high gloss white, and many models (PP4400-C, PP4500-C, PP4600-C, PP4800-C, PP4900-C, PP5050-C, PP5100-C, PP5200-C, PP5920-C Series) are also available in black carbon print. Constructed out of durable ABS like all Gen3 NavPods, these new black carbon models have the same high gloss finish with UV stability.NavPods are made to protect your marine electronics from the harshest of wet boating conditions. All NavPods are manufactured with a double gasket system that provides an excellent watertight seal. PowerPods keep the spray off the electrical connections on the back of your fishfinder/chartplotter, assuring reliability and longevity of your marine electronics.Your fishfinder/chartplotter is easily flush mounted into the pre-cut face of the PowerPod. The base has a large opening (1.1″ for PP4100, PP4400, PP4500, PP4600 Series; 1.8″ for PP4800, PP4900, PP5030, PP5050, PP5060, PP5100, PP5200, PP5920 models) to provide plenty of room for running wires and connectors through the base to conceal them from the elements. This provides protection for wires and connectors from water intrusion, UV exposure or damage from getting snagged and ripped out of their sockets.All NavPods come with a security wrench and Nickel Chrome-Plated Stainless Steel tamper-resistant screws for a little bling and a lot of security. PowerPod pre-cut models are available for most 7″, 9″, 12″ and 16″ displays from all major marine electronic manufacturers. NavPod backs up their commitment to quality by offering a 10-year warranty on all Gen3 NavPods.PowerPods: Protection, Convenience, Security.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Mounting Style: Dash Cut/Uncut: Cut Box Dimensions: 9"H x 15"W x 17"L WT: 6.5 lbs UPC: 659988114294

Read more less

12-Way Locking Swivel Seat Base - E-Coat FinishFeatures: 6-3/4″ Square x 1-1/8″ High, With 4 Hole Mounting Pattern 0-Degree Locking Swivel Rotates 360° Mild Steel E-Coat Finish WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

T-Fitting Assembly  - ORF HoseTypical Application:Used to replace the boss fitting in new outboard cylinders when trying to connect to 'O' ring face seal hosesSpecifications: ORB, Size #6 to 3/8 COMP FITTING Cylinder Side = 9/16 - 18 UNF 2A Hose Side = 9/16 - 24 UNEF 2A

Read more less

Kit OB - Hose Kit for Single Station InstallationConsists of a pair of high pressure hoses supplied with preassembled fittings on both ends.Length: 20 FeetFittings: ORFS Specifications: Cable Length (Feet): 20' Box Dimensions: 4"H x 14"W x 14"L WT: 3.45 lbs UPC: 702755015949

Read more less

Mercury Outboard Power Trim Anode - AluminumUsed on Mercury Verado and Optimax outboards. Also many smaller Mercury/Mariner outboards.Performance Metals Navalloy® aluminum anodes are manufactured to the military specification MIL-DTL 24779 and are suitable for use in all water types- salt, brackish, or fresh.Replaces:Mercury # 818298Q 1Includes:  Mounting hardware  Installation instructions Specifications: Material: Aluminum Box Dimensions: 2"H x 6"W x 11"L WT: 0.45 lbs UPC: 870648000522

Read more less

5" Rudder/Trim Tab Anode - AluminumAluminum trim tab or rudder anode with 2 halves and stainless steel hardware. Nuts are pressed into the casting.Performance Metals Navalloy® aluminum anodes are manufactured to the military specification MIL-DTL 24779 and are suitable for use in all water types- salt, brackish, or fresh. Specifications: Material: Aluminum Box Dimensions: 3"H x 5"W x 5"L WT: 1.6 lbs UPC: 870648000904

Read more less

Liquid Life-Calk Sealant Tube - 2.8 FL. Oz. - BlackHas same outstanding properties as Life-Calk® Sealant such as long-lasting, permanently flexible, can be sanded, painted*** and used above and below the waterline. Tack-free in 1 to 3 days. Excellent resistance to teak oils, gasoline and diesel fuel. Ideal for teak decks, to bed deck and hull hardware, seal thru-hull fittings, and underwater seams. Will bond to fiberglass, wood, metal, glass, and itself. Cures to a firm flexible rubber seal with excellent waterproofing and adhesion qualities. Can be applied to damp surfaces. Low viscosity, free-flowing polysulfide sealant for use on fine cracks and seams.*Not compatible with all paints, Sikkens, Cetol, Deks, OljeWARNING: This product can expose you to chemicals including Toluene which is known to the State of California to cause birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

316 SS T-Bolt Clamp - 3/4" Band - 8.30"-8.87" RangeVery strong and secure clamp for critical installations. Trident Marine T-Bolt Clamps are built with safety in mind. With a 3/4" (19 mm) wide band, this clamp ensures a greater area of coverage for a positive and strong union. It is recommended that two clamps be used on each end of a wet exhaust installation.Specifications: Band & Housing: 316 stainless steel 3/4 in. wide band T-Bolt and Nut: 18-8 stainless steel with nylon insert Hose Outer Diameter (inch): 8.30" to 8.87"

Read more less

316 SS T-Bolt Clamp - 3/4" Band - 5.37"-5.94" RangeVery strong and secure clamp for critical installations. Trident Marine T-Bolt Clamps are built with safety in mind. With a 3/4" (19 mm) wide band, this clamp ensures a greater area of coverage for a positive and strong union. It is recommended that two clamps be used on each end of a wet exhaust installation.Specifications: Band & Housing: 316 stainless steel 3/4 in. wide band T-Bolt and Nut: 18-8 stainless steel with nylon insert Hose Inner Diameter (inch): 5" Hose Outer Diameter (inch): 5.37" to 5.94" Quick Guide (pdf)

Read more less

316 SS T-Bolt Clamp - 3/4" Band - 5.28"-5.59" RangeVery strong and secure clamp for critical installations. Trident Marine T-Bolt Clamps are built with safety in mind. With a 3/4" (19 mm) wide band, this clamp ensures a greater area of coverage for a positive and strong union. It is recommended that two clamps be used on each end of a wet exhaust installation.Specifications: Band & Housing: 316 stainless steel 3/4 in. wide band T-Bolt and Nut: 18-8 stainless steel with nylon insert Hose Outer Diameter (inch): 5.28" to 5.59"

Read more less

316 SS T-Bolt Clamp - 3/4" Band - 3.78"-4.09" RangeVery strong and secure clamp for critical installations. Trident Marine T-Bolt Clamps are built with safety in mind. With a 3/4" (19 mm) wide band, this clamp ensures a greater area of coverage for a positive and strong union. It is recommended that two clamps be used on each end of a wet exhaust installation.Specifications: Band & Housing: 316 stainless steel 3/4 in. wide band T-Bolt and Nut: 18-8 stainless steel with nylon insert Hose Outer Diameter (inch): 3.78" to 4.09"

Read more less