Electrical

3720 products


  • Sale -40% Scanstrut Sub Waterproof Wireless Charger 3-Coil - 15W - 12/24V [SC-CW-7GT] Scanstrut Sub Waterproof Wireless Charger 3-Coil - 15W - 12/24V [SC-CW-7GT]

    Scanstrut Sub Waterproof Wireless Charger 3-Coil - 15W - 12/24V [SC-CW-7GT]

    19 in stock

    Sub Waterproof Wireless Charger 3-Coil - 15W - 12/24VSub now with 15W 3-coil technology. The pioneering three-coil sub-charger is designed to revolutionize your charging experience. Sunk into any surface with foam overlay on top or installed on top of the surface, the sub offers unparalleled ease of use whilst keeping your aesthetics looking flush and clean.The charger's innovative three-coil design is a game-changer for outdoor waterproof charging. Three overlapping charging coils maximize performance, ensuring reliable charging from various phone placements. The intelligent electronics ensure optimal charging by selecting the best coil based on the phone's location.The built-in heat management system also adjusts charging speed based on ambient and phone temperature. This charger is tailored for those seeking uninterrupted charging during outdoor adventures, offering a reliable and efficient solution for powering devices on the go.Intelligent charging:Even when at sea or driving over rough terrain, the intelligent charging features are designed to mirror the movement of your phone, to ensure a constant charge, no matter the adventure or the placement of the phone on the charger.Three-coil system:With a three-coil system that overlaps, there is NO DEAD SPACE, resulting in the most efficient & most amount of power regardless of the phone's position.Hot climates:No problem. With a larger cavity and the electronics designed for thermal management by efficiently dissipating heat, this charger will perform better than other chargers in 30°C (86°F). It will also monitor your phone's heat, adjusting the power output to ensure it does not overheat, helping prolong the health of your phone!LED light system:The rear visible LED on the back of the charger acts as a rear installation light, a visible check to ensure the charger is powered and ready to charge.Red light shows: Charger is in standby mode.White light shows: Phone is charging.Installation:The sub can be installed in two different methods. For an ultra-clean look, you can install the Sub in a recess of your chosen counter and apply a sea deck over the top to show placement and for added grip to hold your phone. Or, if you want to show off the Scanstrut Aesthetic for a minimal, block color look. You can install the Sub on top of a counter; however, this does not have any grip to hold your phone in place.Features: 12/24V 15W Charger IPX6 Waterproof Qi-compatible Input Voltage Range: 10-30V DC (12/24V system) Three overlapping charging coils maximize performance. Top install or flush installation options Reverse polarity protection No alignment is needed, throw your phone on the charger and your phone will always charge! Uninterrupted charging during outdoor adventures Rear installation light, for testing power. Simple one-cut installation Foreign object detection 5-year warranty Our Testing EthosOur testing standard at Scanstrut is encapsulated by the acronym SCA, which stands for Safe, Certified, and Approved. With over 35 years of experience and expertise in designing products for outdoor use, we design our products to be able to thrive in the harshest of outdoor environments.Before any product is released, it must pass through our rigorous testing program which involves assessments in electrical, mechanical, U.V., corrosion, thermal, and waterproof categories. To ensure the highest level of accuracy, testing is conducted both internally and by independent ISO accredited test houses.Our commitment to quality has earned us the approval of renowned names such as Mercury Marine, Grady White Boats, Boston Whaler, Winnebago, Airstream and many more. To learn more about our testing program and certifications, please feel free to reach out to us. Owner's Manual (pdf)Brochure (pdf)

    19 in stock

    $111.90$67.50

  • Sale -40% Scanstrut Surface Waterproof Wireless Charger 3-Coil - 15W - 12/24V [SC-CW-2GT] Scanstrut Surface Waterproof Wireless Charger 3-Coil - 15W - 12/24V [SC-CW-2GT]

    Scanstrut Surface Waterproof Wireless Charger 3-Coil - 15W - 12/24V [SC-CW-2GT]

    15 in stock

    Surface Waterproof Wireless Charger 3-Coil - 15W - 12/24VExperience 15W Intelligent Charging. The pioneering 15W 3 coil surface charger is designed to revolutionize your charging experience. This waterproof and wireless charger can be fitted to any smooth surface, indoors or outdoors.Three overlapping charging coils maximize performance, ensuring reliable charging from various phone placements. With a rubber edge to help keep your phone in place. This charger is tailored for those seeking uninterrupted charging during outdoor adventures, offering a reliable and efficient solution for powering devices on the go.Intelligent charging:Even when at sea or driving over rough terrain, the intelligent charging features are designed to mirror the movement of your phone,to ensure a constant charge, no matter the adventure or the placement of the phone on the charger.Three-coil system:With a three-coil system that overlaps, there is NO DEAD SPACE, resulting in the most efficient & most amount of power regardless of the phone's position.Hot climates:No problem. With a larger cavity, the electronics are designed for thermal management by efficiently dissipating heat,this charger will perform better than other chargers at 30°C (86°F). It will also monitor your phone's heat, adjusting the power output to ensure it does not overheat, helping prolong the health of your phone!Installation:No sealant is required! Simply route out the required shape with our handy template and use the 3M tape on the underside of the charger to adhere to your counter's surface.LED light system:Designed to eliminate the need to lift your phone off the charger, the LED lights are a fast visual method forseeing when power is being delivered to your phone. Additionally, the LED on the base acts as a rear installation light, making the fitting process as quick and easy as possible.Red light shows: Charger is in standby mode.White light shows: Phone is charging.Features: 12/24V 15W Charger IPX6 Waterproof Qi-compatible Input Voltage Range: 10-30V DC (12/24V system) Three overlapping charging coils maximize performance. Reverse polarity protection No alignment is needed, throw your phone on the charger and your phone will always charge! Uninterrupted charging during outdoor adventures Rear installation light, for testing power & correct wiring. LED light acts as a quick visual guide to show the phone is charging. Simple one-cut installation Foreign object detection 5-year warranty Our Testing EthosOur testing standard at Scanstrut is encapsulated by the acronym SCA, which stands for Safe, Certified, and Approved. With over 35 years of experience and expertise in designing products for outdoor use, we design our products to be able to thrive in the harshest of outdoor environments.Before any product is released, it must pass through our rigorous testing program which involves assessments in electrical, mechanical, U.V., corrosion, thermal, and waterproof categories. To ensure the highest level of accuracy, testing is conducted both internally and by independent ISO accredited test houses.Our commitment to quality has earned us the approval of renowned names such as Mercury Marine, Grady White Boats, Boston Whaler, Winnebago, Airstream and many more. To learn more about our testing program and certifications, please feel free to reach out to us. Owner's Manual (pdf)Brochure (pdf)

    15 in stock

    $115.50$69.50

  • Sale -23% ARCO Marine Original Equipment Quality Replacement Solenoid f/Mercury - Isolated Base, 12V [SW275] ARCO Marine Original Equipment Quality Replacement Solenoid f/Mercury - Isolated Base, 12V [SW275]

    ARCO Marine Original Equipment Quality Replacement Solenoid f/Mercury - Isolated Base, 12V [SW275]

    6 in stock

    Original Equipment Quality Replacement Solenoid for Mercury - Isolated Base, 12VReplacement solenoid that will fit Mercury. Isolated base, 12 Volt.Replaces: MERCURY 87-61053 MERCURY 89-15857 MERCURY 89-68258 MERCURY 89-68258A4 MERCURY 89-76545 MERCURY 89-76545T MERCURY 89-853654A1 SIERRA 18-5815 *ARCO Assurance 12-month part and labor warranty protectionThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

    6 in stock

    $35.63$27.50

  • Sale -23%Last stock! ARCO Marine Outboard Solenoid f/Mercury/Force w/Isolated Base [SW109] ARCO Marine Outboard Solenoid f/Mercury/Force w/Isolated Base [SW109]

    ARCO Marine Outboard Solenoid f/Mercury/Force w/Isolated Base [SW109]

    4 in stock

    Outboard Solenoid for Mercury/Force with Isolated BaseThe outboard solenoid that will fit Mercury /Force, Isolated base, 12 Volt.Replaces:MERCURY 89-817109A1MERCURY 89-817109A2MERCURY 89-817109A3SIERRA 18-5834*ARCO Assurance 12-month part and labor warranty protectionThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Type: Parts Box Dimensions: 3"H x 3"W x 4"L WT: 0.75 lbs UPC: 693006001678

    4 in stock

    $43.71$33.50

  • Sale -42%Last stock! Scanstrut DS-H6-BLK Horizontal Cable Seal - Black *5-Pack [DS-H6-BLK-5] Scanstrut DS-H6-BLK Horizontal Cable Seal - Black *5-Pack [DS-H6-BLK-5]

    Scanstrut DS-H6-BLK Horizontal Cable Seal - Black *5-Pack [DS-H6-BLK-5]

    1 in stock

    DS-H6-BLK Horizontal Cable Seal - Black *5-PackThis horizontal cable seal from Scanstrut provides the ideal solution to waterproof cable routing and is perfect for installing solar panels, light bars, antennas, and navigation light cables.  A tapered gland forms a watertight seal around the cable and a closed-cell foam gasket between the housing and the deck ensures a 100% watertight fitting. Features: Watertight installation - 100% waterproof with an IPX68 rating Easy and reliable installation - each unit is supplied with both pre-drilled and blank inner seals to make your installation as easy as possible.  No Need to Remove Cable Connectors - split-seal option does not require connector removal during installation. The low-profile construction is impact resistant and provides extra protection from water. Technical Specifications: Fits cable size (diameter) - .08" to .24" (2 - 6 mm)   Height - .79" (20 mm) Width - 1.12" (28.5 mm) Color - Black Orientation - Horizontal Material - Stainless Steel In the Box: Cable seal Mounting hardware Installation manual  *Sold as a Five (5) Pack Specifications: Type: Deck Seal Box Dimensions: 1"H x 4"W x 9"L WT: 0.75 lbs Quick Guide (pdf)Brochure (pdf)

    1 in stock

    $139.95$81.50

  • Sale -33%Last stock! Scanstrut DS-H6-BLK Horizontal Cable Seal - Black *3-Pack [DS-H6-BLK-3] Scanstrut DS-H6-BLK Horizontal Cable Seal - Black *3-Pack [DS-H6-BLK-3]

    Scanstrut DS-H6-BLK Horizontal Cable Seal - Black *3-Pack [DS-H6-BLK-3]

    2 in stock

    DS-H6-BLK Horizontal Cable Seal - Black *3-PackThis horizontal cable seal from Scanstrut provides the ideal solution to waterproof cable routing and is perfect for installing solar panels, light bars, antennas, and navigation light cables.  A tapered gland forms a watertight seal around the cable and a closed-cell foam gasket between the housing and the deck ensures a 100% watertight fitting. Features: Watertight installation - 100% waterproof with an IPX68 rating Easy and reliable installation - each unit is supplied with both pre-drilled and blank inner seals to make your installation as easy as possible.  No Need to Remove Cable Connectors - split-seal option does not require connector removal during installtion. The low-profile construction is impact resistant and provides extra protection from water. Technical Specifications: Fits cable size (diameter) - .08" to .24" (2 - 6 mm)   Height - .79" (20 mm) Width - 1.12" (28.5 mm) Color - Black Orientation - Horizontal Material - Stainless Steel In the Box: Cable seal Mounting hardware Installation manual  *Sold as a Three (3) Pack Specifications: Type: Deck Seal Box Dimensions: 1"H x 4"W x 9"L WT: 0.45 lbs Quick Guide (pdf)Brochure (pdf)

    2 in stock

    $83.97$56.50

  • Sale -20% Scanstrut DS-H6-BLK Horizontal Cable Seal - Black [DS-H6-BLK] Scanstrut DS-H6-BLK Horizontal Cable Seal - Black [DS-H6-BLK]

    Scanstrut DS-H6-BLK Horizontal Cable Seal - Black [DS-H6-BLK]

    6 in stock

    DS-H6-BLK Horizontal Cable Seal - BlackThis horizontal cable seal from Scanstrut provides the ideal solution to waterproof cable routing and is perfect for installing solar panels, light bars, antenna and navigation light cables.  A tapered gland forms a watertight seal around the cable and a closed-cell foam gasket between the housing and the deck ensures a 100% watertight fitting. Features: Watertight installation - 100% waterproof with an IPX68 rating Easy and reliable installation - each unit supplied with both pre-drilled and blank inner seals to make your installation as easy as possible.  No Need to Remove Cable Connectors - split-seal option does not require connector removal during install. The low-profile construction is impact resistant and provides extra protection from water. Technical Specifications: Fits cable size (diameter) - .08" to .24" (2 - 6 mm)   Height - .79" (20 mm) Width - 1.12" (28.5 mm) Color - Black Orientation - Horizontal Material - Stainless Steel In the Box: Cable seal Mounting hardware Installation manual  *Sold as an Individual Specifications: Type: Deck Seal Box Dimensions: 1"H x 4"W x 9"L WT: 0.15 lbs UPC: 5060114797390 Quick Guide (pdf)Brochure (pdf)

    6 in stock

    $27.99$22.50

  • Sale -47%Last stock! Blue Sea 7477 C - Series Flat Circuit Breaker, Single and Double Pole  -  250 Amp [7477]

    Blue Sea 7477 C - Series Flat Circuit Breaker, Single and Double Pole - 250 Amp [7477]

    2 in stock

    C - Series Flat Circuit Breaker, Single and Double PolePN:   7477Amperage:   250 AmpFeatures: Color actuator indicates "OFF" position "Trip Free" design cannot be held "ON" during fault current condition Flat actuator protects against accidental switching Specifications    Circuit Breaker Type Magnetic Hydraulic - Trip Free Maximum Voltage 80 Volts DC Rated Switch Cycles 10,000@rated amperage and voltage WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Amperage: 250a Box Dimensions: 4"H x 5"W x 6"L WT: 1.35 lbs UPC: 632085074777

    2 in stock

    $361.99$190.50

  • Sale -37%Last stock! Blue Sea 7234 A-Series Double Pole Toggle - 15A - Black [7234]

    Blue Sea 7234 A-Series Double Pole Toggle - 15A - Black [7234]

    2 in stock

    7234 A-Series Double Pole Toggle - 15A - Black Features: Meets American Boat and Yacht Council (ABYC) standards UL 1077 recognized, TUV certified, CE marked for Europe and CSA certified for Canada The industry standard circuit breaker for Blue Sea Systems electrical panels Combines switching and circuit protection into a single device Used as AC Main circuit protection "Trip Free" design cannot be held "ON" during fault current condition WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Amperage: 15a Box Dimensions: 2"H x 3"W x 5"L WT: 0.4 lbs UPC: 632085072346

    2 in stock

    $75.99$47.50

  • Sale -15% Victron Busbar 250A 4P  Cover 4X 5/16" Terminals [VBB125040010]

    Victron Busbar 250A 4P Cover 4X 5/16" Terminals [VBB125040010]

    50 in stock

    Busbar 250A 4P & Cover 4X 5/16" TerminalsBusbars are used for high current distribution and at the same time they provide connections for batteries and/or DC equipment.We offer a number of busbars with different current ratings, and a different number of connection terminals. Each busbar is fitted out with a removable protective cover.Please contact your dealer for any returns, repairs or support issues related to this product. Quick Guide (pdf)

    50 in stock

    $67.00$56.95

  • Sale -49%Last stock! Mastervolt BattMan Pro Battery Monitor - 12/24V [70405070]

    Mastervolt BattMan Pro Battery Monitor - 12/24V [70405070]

    1 in stock

    BattMan Pro Battery Monitor - 12/24VBattery monitor, 12/24 V DC with large, splash-proof display (IP65) and power bar. Displays remaining time and stores special battery status events.An affordable battery monitor that does exactly that: providing critical information about the status of your battery bank under all circumstances. Moreover, it will warn you when your battery bank is empty. Also displays the remaining time until your battery needs to be charged and stores special battery status events.General Specifications: Number of battery outlets: 2; service (fully), starter (voltage) Display/read-out: Voltage, current, amp-hours, battery capacity in % Languages on display: Universal Built-in depth: 72.5 mm/2.9 inch Dimensions: Ø 64 mm, depth 79 mm Dimensions shunt, height x width x depth: 87 x 45 x 35 mm/3.4 x 1.8 x 1.4 inch Weight: 0.15 kg/0.3 lb Technical Specifications: Max. Ah capacity: 9999 Ah Supply voltage: 9-35 V Voltage range: 0-35 V Current consumption (backlight off): 8 mA/12 V, 6 mA/24 V Current consumption (backlight on): 30 mA/12 V, 18 mA/24 V Voltage resolution: 0.1 V Voltage accuracy: ± 0.3% Shunt specification: 500 A/50 mV (service set) Current measurement range: 0-500 A Current accuracy: ± 0,4 % Battery alarm contact: Yes, potential free Remaining time indication: Yes Historical data: Yes MasterBus compatible: No Connection cable (6-wire) necessary: Yes Modular cable necessary: No WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Owner's Manual (pdf)

    1 in stock

    $513.99$262.50

  • Last stock! BEP SPST Chrome Plated Toggle Switch Wire Leads - ON/OFF [1002023]

    BEP SPST Chrome Plated Toggle Switch Wire Leads - ON/OFF [1002023]

    1 in stock

    SPST Chrome Plated Toggle Switch Wire Leads - ON/OFFSingle pole, single throw toggle switch turns one circuit on and off. Common applications include any single circuit requiring an on-off style switch.Features: Nominal voltage is 12V DC Rated for 10A at 12V DC Two 6" 18 AWG wire lead terminals Mounting stem 15/32" fits panels up to 1/4" thick Same as Cole Hersee part number M-584 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Action: On/Off Color: Chrome Plated Throw/Pole: SPST Box Dimensions: 2"H x 3"W x 5"L WT: 0.1 lbs UPC: 870216046822

    1 in stock

    $14.50

Electrical

© 2025 Safe Water, Powered by Safe Water

    • American Express
    • Apple Pay
    • Diners Club
    • Discover
    • Google Pay
    • Mastercard
    • PayPal
    • Shop Pay
    • Visa

    Login

    Forgot your password?

    Don't have an account yet?
    Create account