Electrical

3726 products


  • Sale -9% Ancor Marine Grade Electrical Wire Seal - Round Cable - 1 to 3/0 AWG, 3/4" NPT [765004]

    Ancor Marine Grade Electrical Wire Seal - Round Cable - 1 to 3/0 AWG, 3/4" NPT [765004]

    16 in stock

    Marine Grade Electrical Wire Seal - Round Cable - 1 to 3/0 AWG, 3/4" NPTLiquid Tight Wire Seals provide low cost watertight cable entries into panels and junction boxes. UL and CSA approved to work with round cable. Resistant to saltwater, gasoline, alcohol, ketones, and mineral oil. Safe underwater to 300ft. (150 PSIG). Features: Round Cable AWG Range: 1-3/0 Min/Max: .51-.71 Clearance Hole: 1.05 NPT Size": 3/4 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Cable Gland Box Dimensions: 2"H x 3"W x 5"L WT: 0.1 lbs UPC: 091887803983 Brochure (pdf)

    16 in stock

    $15.99$14.50

  • Sale -4%Last stock! Ancor Adhesive Lined Heat Shrink Tubing (ALT) - 1" x 3" - 3-Pack - Black [307103]

    Ancor Adhesive Lined Heat Shrink Tubing (ALT) - 1" x 3" - 3-Pack - Black [307103]

    5 in stock

    Adhesive Lined Heat Shrink Tubing (ALT) - 1" x 3" - 3-Pack - BlackPackage of 3 Black 3"(7.6cm) long sections with a 1"(25.4mm) diameter that shrinks to 5/16"(7.9mm)Wire Range: 2-4/0 AWGFeatures: Cross Linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief Highest shrink ratio - shrinks to 1/3 original size Shrinks at 257°F / 125°C Operating temperature range of -40°C to 110°C UL 224 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Heat Shrink Box Dimensions: 2"H x 3"W x 4"L WT: 0.2 lbs UPC: 091887306743

    5 in stock

    $12.99$12.50

  • Sale -30%Last stock! Ancor Adhesive Lined Heat Shrink Tubing (ALT) - 1/2" x 12" - 5-Pack - Red [305624]

    Ancor Adhesive Lined Heat Shrink Tubing (ALT) - 1/2" x 12" - 5-Pack - Red [305624]

    5 in stock

    Adhesive Lined Heat Shrink Tubing (ALT) - 1/2" x 12" - 5-Pack - RedPackage of 5 Red 12"(30.5cm) long sections with a 1/2"(12.7mm) diameter that shrinks to 5/32"(4mm)Wire Range: 8-4 AWGFeatures: Cross Linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief Highest shrink ratio - shrinks to 1/3 original size Shrinks at 257°F / 125°C Operating temperature range of -40°C to 110°C UL 224 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Heat Shrink Box Dimensions: 1"H x 3"W x 12"L WT: 0.2 lbs UPC: 091887974027

    5 in stock

    $34.99$24.50

  • Last stock! Ancor Marine Grade Electrical Wire Seal - Round Cable, 18 to 10 AWG, 3/8" NPT [764998]

    Ancor Marine Grade Electrical Wire Seal - Round Cable, 18 to 10 AWG, 3/8" NPT [764998]

    2 in stock

    Marine Grade Electrical Wire Seal - Round Cable, 18 to 10 AWG, 3/8" NPTMade of Nylon 6/6 flame resistant, self extinguishing Buna-N form seal. All seals exceed NMEA 4 x or 6 specs. Overlapping clamping spines allow for superior pull-out protection and resistance. Strain relief fittings are resistant to salt water and acid.Features: Round Cable 18 to 10-Gauge/AWG 3/8" NPT WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Cable Gland Box Dimensions: 1"H x 2"W x 4"L WT: 0.1 lbs UPC: 091887803976 Brochure (pdf)

    2 in stock

    $10.50

  • Sale -28% Ancor 15" UV Black Heavy Duty Cable Zip Ties - 100 Pack [199260]

    Ancor 15" UV Black Heavy Duty Cable Zip Ties - 100 Pack [199260]

    7 in stock

    15" UV Black Heavy Duty Cable Zip Ties - 100 PackAncor offers a wide variety of materials, styles, and sizing options. A DoubleLock design offers increased tensile strength that is 33% stronger than the industry standard cable tie. With a unique design and high-quality construction, Marinco cable ties provide a great solution for bundling wire, cable, hoses, cords and countless other applications.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Cable Ties Box Dimensions: 3"H x 3"W x 16"L WT: 0.9 lbs UPC: 093344050350

    7 in stock

    $26.99$19.50

  • Ancor White Triplex Cable - 14/3 - Sold by the Foot [1315-FT]

    Ancor White Triplex Cable - 14/3 - Sold by the Foot [1315-FT]

    51 in stock

    White Triplex Cable - 14/3 - Sold by the FootFeatures: Ancor round triplex cable features white, green, and black Marine Grade primary conductors (correctly color-coded to ABYC standards) in a white common jacket that is made for easy removal while providing the best abrasion resistance available These cables exceed UL 1426 standards and are made from the highest quality ultra flexible (Type 3/Class K) tinned copper stranding that provides maximum protection against corrosion and electrolysis while resisting fatigue due to vibration and flexing Ancor's proprietary premium vinyl insulation stays flexible even in extreme cold and resists salt water, battery acid, oil, gasoline, and ultraviolet radiation. Exclusive insulation is rated at 600 volts, 105°C dry and 75°C wet, and is resistant to heat and abrasion. Features three Marine Grade™ primary conductors (white, black, and green) in a white common jacket.

    51 in stock

    $6.50

  • Pacer 8" Cable Tie w/Mounting Ring - Black - 50lb Tensile Strength - 2" Bundle Diameter - 100 Piece Bag [CTMR2S-100BK]

    Pacer 8" Cable Tie w/Mounting Ring - Black - 50lb Tensile Strength - 2" Bundle Diameter - 100 Piece Bag [CTMR2S-100BK]

    10 in stock

    8" Cable Tie with Mounting Ring - Black - 50lb Tensile Strength - 2" Bundle Diameter - 100 Piece BagCable ties are one of the most common wire management used today. They are found in a variety of industries where they are used to secure wire bundles, cables, or other surfaces. They are known for their ease of installation and are built to last in tough environments. Made from Nylon 6.6, the white cable ties are built for indoor use and the black cable ties are meant for both indoor and outdoor usage. Cable ties are some of the most widely used bundling and harness materials available. Features: Natural: For indoor use Black: For indoor or outdoor use (UV resistant) The curved tip is easy to pick up from flat surfaces and allows faster initial threading to speed up installation Applications: Cable ties are the most widely used and versatile bundling and harnessing material available Used to secure a cable bundle to another surface such as a control panel, communication rack, wall, or ceiling Compliances: UL Listed, CSA Flammability UL 94V-2 RoHS & CE compliant Characteristics: 6.6 Nylon (Nat. & UV res. Black) Max. Cont. Temp. 185 °F (85 °C) Min. Cont. Temp. -76 °F (-60 °C) Screw Size #4 to #10 Brochure (pdf)

    10 in stock

    $15.50

  • Pacer 8" Cable Tie w/Mounting Ring - Natural Color - 50lb Tensile Strength - 2" Bundle Diameter - 100 Piece Bag [CTMR2S-100]

    Pacer 8" Cable Tie w/Mounting Ring - Natural Color - 50lb Tensile Strength - 2" Bundle Diameter - 100 Piece Bag [CTMR2S-100]

    16 in stock

    8" Cable Tie with Mounting Ring - Natural Color - 50lb Tensile Strength - 2" Bundle Diameter - 100 Piece BagCable ties are one of the most common wire management used today. They are found in a variety of industries where they are used to secure wire bundles, cables, or other surfaces. They are known for their ease of installation and are built to last in tough environments. Made from Nylon 6.6, the white cable ties are built for indoor use and the black cable ties are meant for both indoor and outdoor usage. Cable ties are some of the most widely used bundling and harness materials available. Features: Natural: For indoor use Black: For indoor or outdoor use (UV resistant) The curved tip is easy to pick up from flat surfaces and allows faster initial threading to speed up installation Applications: Cable ties are the most widely used and versatile bundling and harnessing material available Used to secure a cable bundle to another surface such as a control panel, communication rack, wall, or ceiling Compliances: UL Listed, CSA Flammability UL 94V-2 RoHS & CE compliant Characteristics: 6.6 Nylon (Nat. & UV res. Black) Max. Cont. Temp. 185 °F (85 °C) Min. Cont. Temp. -76 °F (-60 °C) Screw Size #4 to #10 Brochure (pdf)

    16 in stock

    $13.50

  • Pacer 15" Cable Tie w/Mounting Ring - Black - 50lb Tensile Strength - 4" Bundle Diameter - 100 Piece Bag [CTMR4S-100BK]

    Pacer 15" Cable Tie w/Mounting Ring - Black - 50lb Tensile Strength - 4" Bundle Diameter - 100 Piece Bag [CTMR4S-100BK]

    15 in stock

    15" Cable Tie with Mounting Ring - Black - 50lb Tensile Strength - 4" Bundle Diameter - 100 Piece BagCable ties are one of the most common wire management used today. They are found in a variety of industries where they are used to secure wire bundles, cables, or other surfaces. They are known for their ease of installation and are built to last in tough environments. Made from Nylon 6.6, the white cable ties are built for indoor use and the black cable ties are meant for both indoor and outdoor usage. Cable ties are some of the most widely used bundling and harness materials available. Features: Natural: For indoor use Black: For indoor or outdoor use (UV resistant) The curved tip is easy to pick up from flat surfaces and allows faster initial threading to speed up installation Applications: Cable ties are the most widely used and versatile bundling and harnessing material available Used to secure a cable bundle to another surface such as a control panel, communication rack, wall, or ceiling Compliances: UL Listed, CSA Flammability UL 94V-2 RoHS & CE compliant Characteristics: 6.6 Nylon (Nat. & UV res. Black) Max. Cont. Temp. 185 °F (85 °C) Min. Cont. Temp. -76 °F (-60 °C) Screw Size #4 to #10 Brochure (pdf)

    15 in stock

    $20.50

  • Pacer Seamless Butt Splice - 1 AWG - Non-Insulated - 2 Pack [TBS1-2]

    Pacer Seamless Butt Splice - 1 AWG - Non-Insulated - 2 Pack [TBS1-2]

    39 in stock

    Seamless Butt Splice - 1 AWG - Non-Insulated - 2 PackButt splices are a simple way to repair or create a long-term electrical connection. They are easy to use and built for longevity. Seamless tinned butt splices are available in non-insulated only. How do you use seamless tinned butt splices? The first thing to do is cut and strip your wires to the proper length. Now, if you look inside the butt splice you will see there is an indentation. Insert your wire into the butt splice making sure it butts up to the indentation. Next, simply crimp using the proper tool. This guarantees the correct amount of pressure ensuring a solid connection. Now, simply repeat the process on the other side and you're done. Pacer would strongly recommend performing the tug test. This test ensures that the connection is solid. To do the test simply grab both wires coming out of the butt splice and gently tug two or three times.When using seamless tinned butt splices, make sure you have properly stripped your wires to the correct length. When you look inside of the butt splice, you will see an indentation. Make sure your conductors butt up against that. Insert the wire making sure the insulation touches the butt splice. This reduces the risk of a weaker connection. Now, the splice is crimped with the proper tool. This crimp creates a solid connection. Next, repeat the process on the other side and perform the tug test to make sure that the wires don't pull out. This process creates a durable, lasting connection. Butt splices are used for their rapid installation and durability. Other methods of connection just don't offer the same level of protection.Features: Tin Plated Seamless Specifications: Package Size: 2 Wire AWG: 1 Length: ” I.D. (in.): ” O.D. (in.): ” Compliances: E.T.P. (Electrolytic Tough Pitch) CDA-110 ASTM-B-152 copper rated at 100% conductivity UL & CSA Approved RoHS Compliant

    39 in stock

    $10.50

  • Pacer 6" Cable Tie - Natural Color - 30-40lb Tensile Strength - 1.5" Bundle Diameter - 100 Piece Bag [CT1.5I-100]

    Pacer 6" Cable Tie - Natural Color - 30-40lb Tensile Strength - 1.5" Bundle Diameter - 100 Piece Bag [CT1.5I-100]

    14 in stock

    6" Cable Tie - Natural Color - 30-40lb Tensile Strength - 1.5" Bundle Diameter - 100 Piece BagCable ties are one of the most common wire management used today. They are found in a variety of industries where they are used to secure wire bundles, cables, or other surfaces. They are known for their ease of installation and are built to last in tough environments. Made from Nylon 6.6, the white cable ties are built for indoor use and the black cable ties are meant for both indoor and outdoor usage. Cable ties are some of the most widely used bundling and harness materials available. Features: Natural: For indoor use Black: For indoor or outdoor use (UV resistant) The curved tip is easy to pick up from flat surfaces and allows faster initial threading to speed up installation Applications: Cable ties are the most widely used and versatile bundling and harnessing material available Used to secure a cable bundle to another surface such as a control panel, communication rack, wall, or ceiling Compliances: UL Listed, CSA Flammability UL 94V-2 RoHS & CE compliant Characteristics: 6.6 Nylon (Nat. & UV res. Black) Max. Cont. Temp. 185 °F (85 °C) Min. Cont. Temp. -76 °F (-60 °C) Screw Size #4 to #10 Brochure (pdf)

    14 in stock

    $9.50

  • Sale -40% Scanstrut Hidden Waterproof Wireless Charger 3-Coil - 15W - 12/24V [SC-CW-1GT] Scanstrut Hidden Waterproof Wireless Charger 3-Coil - 15W - 12/24V [SC-CW-1GT]

    Scanstrut Hidden Waterproof Wireless Charger 3-Coil - 15W - 12/24V [SC-CW-1GT]

    22 in stock

    Hidden Waterproof Wireless Charger 3-Coil - 15W - 12/24VHidden from view, ready to charge. Engineered to be installed under the surface, leaving the top surface uncluttered. The pioneering three-coil hidden charger is designed to revolutionize your charging experience. Mounted underneath your selected surface, Hidden 3 Coil gives a sleek and ultra-clean aesthetic. With the option of having a rubber grip to showcase location or to go ultra-minimal, you could etch a marker or logo to showcase placement for your phone.The charger's innovative three-coil design is a game-changer for outdoor waterproof charging. Three overlapping charging coils maximize performance, ensuring reliable charging from various phone placements.The intelligent electronics ensure optimal charging by selecting the best coil based on the phone's location. Additionally, the built-in heat management system adjusts charging speed based on ambient and phone temperature. This charger is tailored for those seeking uninterrupted charging during outdoor adventures, offering a reliable and efficient solution for powering devices on the go.Features: 12/24V 15W Charger IPX6 Waterproof Qi-compatible Input Voltage Range: 10-30V DC (12/24V system) Three overlapping charging coils maximize performance Reverse polarity protection Ultra-grippy rubber edge – to show the location of the charger and for phone grip. No alignment is needed, throw your phone on the charger and your phone will always charge! Uninterrupted charging during outdoor adventures Rear installation light, for testing power Simple one-cut installation Foreign object detection 5-year warranty Our Testing EthosOur testing standard at Scanstrut is encapsulated by the acronym SCA, which stands for Safe, Certified, and Approved. With over 35 years of experience and expertise in designing products for outdoor use, we design our products to be able to thrive in the harshest of outdoor environments.Before any product is released, it must pass through our rigorous testing program which involves assessments in electrical, mechanical, U.V., corrosion, thermal, and waterproof categories. To ensure the highest level of accuracy, testing is conducted both internally and by independent ISO accredited test houses.Our commitment to quality has earned us the approval of renowned names such as Mercury Marine, Grady White Boats, Boston Whaler, Winnebago, Airstream and many more. To learn more about our testing program and certifications, please feel free to reach out to us. Owner's Manual (pdf)Brochure (pdf)

    22 in stock

    $115.50$69.50

Electrical

© 2025 Safe Water, Powered by Safe Water

    • American Express
    • Apple Pay
    • Diners Club
    • Discover
    • Google Pay
    • Mastercard
    • PayPal
    • Shop Pay
    • Visa

    Login

    Forgot your password?

    Don't have an account yet?
    Create account