Marine Plumbing & Ventilation

Perko 1" Seacock Ball Valve BronzeThese valve bodies are offered to meet the needs of applications thatrequire extra long, scoop or flush type thru-hulls.Cast Bronze.Technical Information: Flange Diameter Inches: 4-3/8" Overall Height Inches: 3-3/4" Pipe Size Inches: 1" Model Number: 0805006PLB Ship Weight: 3.9 lbs. *Overall height is measured from the top of the hose adapter to the bottomof the flange. Specifications: Construction: Bronze Box Dimensions: 4"H x 5"W x 7"L WT: 3.85 lbs UPC: 085226237966 Quick Guide (pdf)

Read more less

Perko 2" Thru-Hull Fitting w/ Pipe Thread BronzeFlange is machined to fit hull and grooved to retain bedding compound. Neck is threaded to approximately 3/8 inch from flange.Cast Bronze.Technical Information: Pipe Size Inches: 2 Mounting Hole Diameter Inches: 2-3/8 Maximum Hull Thickness Inches: 2-3/8 O.D. Flange Inches: 3-5/8 Model Number: 0322009PLB Ship Weight: 2.1/19.4 lbs. MADE IN THE USA Specifications: Hose Size: 2" Material: Bronze Box Dimensions: 4"H x 5"W x 5"L WT: 2.05 lbs UPC: 085226112058

Read more less

Water Inlet Fitting(0499) Chrome Plated Bronze Standard Female Swivel Hose Connector Black Plastic Watertight Plug Stainless Steel Bead Chain For obtaining water at docksidePipe Size: 1/2"O.D. Flange: 2-3/4" Specifications: Construction: Chrome Plated Bronze Box Dimensions: 3"H x 4"W x 7"L WT: 0.5 lbs UPC: 085226659614

Read more less

Impeller Kit - 8 Blade - Nitrile - 2-9/16" Diameter - Spline DriveMaterial: NitrileDrive Type: Single Flat DriveNumber of Blades: 8Dimensions:Diameter: 2-9/16"Shaft Width: 5/8"Shaft Diameter: 2"Insert Material: BrassJabsco flexible impellers can be fitted to most makes and models of bronze flexible impeller engine cooling, bilge, transfer and general purpose pumps.Jabsco flexible impellers are subjected to rigorous quality processes to ensure reliable, efficient and long lasting performance.Replace all impellers at least once every year, or sooner, depending on the engine duty. When the installation is correct an impeller may last for several years, but it is always advisable to stick to a schedule of preventative, rather than corrective, maintenance.Replacing impellers is easy. By removing the end cover screws, it is possible to remove the impeller by using either a Jabsco Impeller Removal Tool, or channel lock pliers, to grip the hub of the impeller. Don?t use screwdrivers as they may damage the face of the pump body, causing leaks, and they can be dangerous in confined spaces.Always carry spare impellers on board in case of emergency. The impeller is one of the most vital components of the engine cooling system and should always be treated as such. Always grease new impellers. Firstly, it makes it easier to install the impeller into the pump bore, and secondly it gives added protection to the impeller during initial prime. After replacing the gasket and end cover the pump is ready to use.WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Electric Marine Toilet - Compact Bowl - 12VThis versatile toilet brings the luxury of electric flushing aboard your vessel. Features: An integral self-priming rinse pump designed to bring sea, river or lake water into the bowl comes standard A flexible design makes it suitable for overboard or holding tank discharge A built-in backflow preventer guards against flooding and waste return Corrosion-resistant materials throughout permit fresh or salt water service Can be mounted 3' (1m) above or below the waterline with appropriate plumbing For use with sea, river or lake water only Compact Bowl size Wood - Standard Close lid Raw water Integral/Rinse Pump Specifications: Size: Compact Size Color: White Operation Method: Electric Volts: 12v Type: Toilet Box Dimensions: 17"H x 21"W x 23"L WT: 29.95 lbs UPC: 671880628303

Read more less

Pumpguard In-Line Strainer - 1/2" NPT PortHandy filter keeps tank crud out of your pressure water pump or bilge pump. Stainless mesh screen collects rust and scale, and can be cleaned in minutes. Protects the pump from valve damage. Can be installed in any position prior to the pump. Clear inspection cover lets you see if it needs cleaning.Prevents dirt from entering pump intake. Works in any position. Easy to install and clean. Has transparent housing and stainless steel mesh filtering screen. Jabsco Pumpguard in-line strainers make great filtering agent.WARNING: This product can expose you to chemicals including STYRENE which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Read more less

PRO BLASTER™ II Washdown Pump Deluxe - 12 VDC, 4.0 GPMSHURFLO's PRO BLASTER II washdown pump delivers superior performance that customers have come to expect and rely upon. Whether it's blasting away the grimiest decks clean, fish box scaling and anchor chain cleaning, SHURFLO's PRO BLASTER II washdown pump delivers high performance that provides a powerful consistent spray pattern. Built to withstand the marine environment with electro-coated motor, O-ring seals, fully sealed wire entries and can run dry without damage. Inlet strainer, 1/2" hose barb fittings and nozzle included. Ignition protected. Thermally protected.Features: 4901 Replacement Sealed Switch Sealed Motor Corrosion Resistant Electro Coated Motor Independent Chambers Built-In Check Valve Co-Molded Diaphragm Self-Priming up to 6 Feet Dry Run Capability Thermally Protected Ignition Protected, CE This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Volts: 12v Max PSI: 60 Gallons Per Minute: 4 GPM Box Dimensions: 6"H x 6"W x 12"L WT: 8.65 lbs UPC: 752324011964

Read more less

Washdown Water Outlet - Chrome Plated BrassEdit TitleThe Washdown Water Outlet allows for a garden hose to be hooked up to the onboard water system. Standard male hose connector. Requires a separate ball or gate valve to regulate water flow. Specifications: Pipe size: 1/2" FIPT x 3/4" MGHT Constructed of chrome-plated brass

Read more less

Gulper Grouper Mk3 Fishbox/Waste Pump w/90° Ports - 12VNon clog electric Waste pumps without filters, built on more than a decade of market leading valve technology.Proven Diaphragm TechnologyWhale Gulper waste products have been at the forefront of marketing leading waste technology for over 2 decades. Rather than impeller motors, Gulper pumps contain reciprocating heavy duty diaphragms and specialized non-choke valves to handle grey, bilge, black and fishbox waste on board.Ideal Macerator Replacement in Fishbox InstallationsThe Gulper Grouper Mk 3 builds on the decades of proven pump technology and now features 90° inlet and outlet ports with integrated non-choke valves. The improved design allows the pump to be used as a direct replacementfor macerator impeller pumps. Compared to typical macerators, the Gulper Grouper Mk 3 is quieter and lightweight. With diaphragm technology, the pump does not clog or suffer from motor burn out meaning a longer system life and less unwanted maintenance jobs! With a low power consumption and run dry capability the Gulper Grouper Mk 3 really is the pump of choice for fishbox evacuation.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Inlet Style: Angled Type: Waste Pumps Box Dimensions: 6"H x 6"W x 14"L WT: 4.9 lbs UPC: 766478949592 Brochure (pdf)

Read more less

Perko 5" X 3-1/4" Scoop Strainer BronzeCast bronzeMachine slotsTechnical Information: For Thru-Hull Size Inches: 3/4 & 1 Dimensions Strainer Inches: 5 X 3-1/4 Model Number: 0066DP2PLB Ship Weight: 4.4/4.3 lbs. Screw Size: #8

Read more less

Stainless Hold-Down BracketStainless hold-down bracket for low-profile bilge water pickups. BRACKETS ARE NOT INCLUDED WITH BILGE-B-DRY ORDERS. If needed, use the stainless hold-down bracket to help secure your low-profile bilge water pickup.Specifications: Dimensions (inches): Rectangular Pickup: 0.98 H x 2.4 W x 3.9 L Dimensions (mm): Rectangular Pickup: 50 H x 60 W x 100 L

Read more less

1" Water Strainer w/Bracket & Fittings - 50 Mesh ScreenSHURFLO's family of Raw Water Strainers are built to keep your bait tank, livewell and washdown pumps protected from harmful debris. The Raw Water Strainer features a clear twist off bowl and removable stainless steel screen, which allows for easy inspection and cleaning. An integral o-ring creates a tight seal, eliminating possible leaks. Keep your pumps and components lasting longer by protecting them with the SHURFLO Raw Water Strainer. 1 Year WarrantyFeatures: 50 Mesh Screen Protects Pumps from Harmful Debris High Capacity Rugged Nylon Housing with Clear Twist Off Polyamide Bowl Easy to Clean Slide Out Screen This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less