Heavy Duty RV Water Pump with Strainer - 24V - 4GPM - 50PSIFlojet’s RV water pumps are designed to provide years of satisfactory service in applications both large and small. The lineup features a wide range of flows and a variety of pressure settings to suit each individual need and preference. Standard models have a motor enclosed in a protective plastic housing, whereas the HD models include a wider diameter motor with a powder-coated steel shell, cast aluminum end bells, and lower housing to improve pressure capability and life. All models include an integrated pressure switch, vibration dampening rubber mounting feet, and quick-connect ports. A built-in bypass valve helps to reduce unwanted pump cycling and noise. All models other than the 1 GPM come with an inlet strainer included as well.Features:
CSA certified for potable water
Integrated, sealed pressure switch for on-demand operation
Internal bypass for quiet, smooth operation
Integrated, sealed pressure switch for on-demand operation
Co-molded diaphragm technology for long life and durability
HD models have larger motors and cast aluminum lower housings which allow for long life, even at high pressures
Can run dry without damage
Quick connect ports for ease of installation, servicing, and maintenance
Vibration dampening mounting feet
Self-priming allows for installation versatility
Built-in backflow prevention valve
Thermal protection on motor prevents overheating
Specifications:
12VDC & 24VDC
4 GPM (15 LPM)
50 PSI (3.4 BAR)
Strainer & port fittings included
WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
PUREWATER+All-In-One Water Filtration System 5 Micron Replacement FilterFeatures:
Simple filter change by twisting off faucet head simply dropping filter into cartridge without crawling under sink
On-demand ultra-clean tasting water from your tank
Elegantly styled
Simple to install
Compact filter housing maximizes under sink storage
MF 842 Vented Loop - 3/4"Installing one of our vented loops will ensure that fluids will not siphon from tank to tank. Vented loops are commonly used in the marine toilet system and engine cooling system. The simple valve system incorporated in the top of the loop allows air to enter the line when not in use, yet effectively seals as water or other fluid passes through. Molded in Marelon, neither vent nor loop will corrode. The duckbill one way valve is designed to seal properly if particulate matter is present in fluids. Specifications:
Barb Size: 3/4" (19.05mm)
Height: 4-1/2" (114.3mm)
Width: 3-3/4"" (95.25mm)
Specifications:
Type: Vented Loops
Box Dimensions: 2"H x 4"W x 5"L WT: 0.1 lbs
UPC: 028026148728
Ultimate 747 12V 2-Speed 7" Fan with Lighter Plug - BlackCaframo's most popular marine fan. FingerSafe blade allows for maximum airflow. Two-speed options.Industry recognized and a long-time favorite of sailors! The model 747 Ultimate 12 Volt DC fan is recognized by Practical Sailor magazine as a "Best Buy" in the marine market. It features a Fingersafe blade that does not require a protective grill and has a shock-absorbing leading edge that flexes when it is stopped. The resulting maximum airflow makes the 747 Ultimate the top choice for sailors heading to hot, humid climates.Features:
Two speeds
Comes with two mounting options (permanent or removable suction cup)
12 Volt lighter plug included
Long life, low power drawing motor
Adjustable base and tilting head
Benefits:
Maximum airflow
Easy to clean
Easy to install
Quiet, dependable operation
Direct air in any direction
Match any boat interior
The fan stays in place in rough seas
Owner's Manual (pdf)Brochure (pdf)
Perko 3/4" Seacock Ball Valve BronzeThese valves bodies are offered to meet the needs of applications that require extra long, scoop or flush type thru-hulls. Cast bronze. Technical Information:
Flange Diameter Inches: 3-1/4
Overall Height Inches: 3-3/8
Pipe Size Inches: 3/4
Model Number: 0805005PLB
Ship Weight: 2.3 lbs.
MADE IN THE USA
*Overall height is measured from the top of the hose adapter to the bottom of the flange. Specifications:
Construction: Bronze
Box Dimensions: 4"H x 4"W x 6"L WT: 2.25 lbs
UPC: 085226237881
Quick Guide (pdf)
2000 Bilge Pump - 12 VDC, 2000 GPHHeavy duty and built to last. SHURFLOs 2000 GPH nylon bilge pump offers a unique motor cooling system to ensure efficient performance and long life. Installation is a snap with our patented swivel base and 6' tinned wire assembly.Features:
3' Tinned Wire Assembly
Anti-Airlock
Tough Nylon Housing
Ignition Protected
Water Cooled Motors - Extended Life
3 Year Warranty
CE Listed
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications:
Volts: 12v
Operation: Non-Automatic
Gallons Per Hour: 2000 GPH
Type: Electric
Box Dimensions: 6"H x 7"W x 9"L WT: 5.5 lbs
UPC: 752324010127
Sea Kayak Pump w/Float-a-Pump SleeveDesigned specifically with the Sea-Kayaker in mind, this upgraded version of our popular Canoe Pump includes an aluminum reinforcing shaft which prevents the pump shaft from flexing in a rolling sea and won't affect a compass. A hose can be added for extended discharge. The installed Float-a-Pump provides positive flotation for pumps dropped overboard.Features:
Diameter: 1-3/4"
Length: 18"
Strokes per Gallon: 8 strokes
Gallon per minute: 8 gallons
Mounting clips sold separately WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Gallons Per Hour: 480 GPH
Gallons Per Minute: 8 GPM
Type: Manual
Box Dimensions: 3"H x 4"W x 20"L WT: 0.7 lbs
UPC: 021083008776
IC Adapter Cable for Old IC Pumps to New IC AccessoriesThe Whale IC adaptor AK7690 allows old Gulper IC pumps to connect to new Whale IC accessories, such as strainers, gulleys, and manifolds.
Stainless Steel Thru-Hull Short Straight Barbed - 1" Inner DiameterPolish your image with these beautiful, durable stainless steel fittings. Why specify plastic parts when these fittings will last the life of the boat?Rugged Stainless Construction:
Cast from certified Enhanced 316 Stainless Steel alloy for strength and lifetime corrosion-resistance
All visible areas are polished to a mirror finish, then passivate each part for additional protection
Thick steel sidewalls withstand continual stress and hose flexing
Faster, Simpler Installation:
Each Thru-Hull is available with a new silicone gasket
A channel under the flange holds a bead of sealant, making it easier to apply a trouble-free seal
All models have wrench flats or an end notch to hold as a gripping surface; one installer can tighten all connections from inside the hull
The barbed tail ends provide plenty of room to hold multiple clamps
Stainless Steel Straight Thru-Hulls, BarbedShort Thread is a more compact size, which allows installation near corners and in confined areasSpecifications:
Hose size: (inch) 1" inner diameter
Flange Diameter: (inch) 2-1/4"
Thread O.D. (outside diameter): (inch) 1-3/8"
Thread Length: (inch) 1-1/8"
Barb Length: (inch) 1"
Total Length: (inch) 2-1/2"
Install Hole Saw Size: (inch) 1-1/2"
Thread NPSM: (inch) 1"
Max Hull Thickness: (inch) 5/8"
*Stainless Steel Thru-Hull Connectors are designed for installation above the water line only Specifications:
Hose Size: 1"
Material: Stainless Steel
Box Dimensions: 2"H x 3"W x 3"L WT: 0.6 lbs
UPC: 022697665423
Quick Guide (pdf)
3" Full Flow Ball ValveThis GROCO flanged ball valve is designed for controlling the flow and pressure of fluids in a pipeline system.Features:
1-1/4" sizes and larger include one grease zerk fitting for lubrication (use only with the valve in the open position), and one drain plug. The zerk can also be used for draining.
The patented field reversible handle allows you to select the closed position orientation (clockwise or counter-clockwise) that best suits the installation.
The handle has a square hole to accept standard ratchet, to help reach valves in hard-to-reach locations and ease the actuation of difficult-to-operate valves.
Full flow
A triangular base with a bolt pattern to match most popular brands makes retrofit easy.
C83600 bronze construction
Stainless steel handle and hardware
Chrome-plated solid brass ball
PTFE seats and seals
Bonding attachment on base
Specifications:
Thread Bottom NPS: 3"
Thread Top NPT: 3"
Specifications:
Construction: Bronze
Box Dimensions: 8"H x 9"W x 16"L WT: 19.4 lbs
UPC: 742985144774