Marine Plumbing & Ventilation

Water BanditCamco's Water Bandit connects standard water hoses to previously unattachable water sources, allowing users to stop wasting water from water hose leaks. This product measures 3 ¼-inches long. One end connects to a standard water hose (via a standard ABS male water hose connection). The other end (a highly flexible, silicone-polymer sleeve) stretches to fit over the end of most standard water sources—including damaged/stripped threads or water sources with no threads at all.This product is safe for drinking water and compliant with all federal and state-level low-lead laws. It is CSA Low Lead Content Certified to NSF/ANSI 372. Water Bandit is not intended for non-threaded kitchen sink faucets or use under pressure. This RV accessory is a camper must-have, so add this small hose accessory to the camping supplies! It’s great for motorhomes, travel trailers, 5th wheels, and more.Stops Leaky Hose ConnectionsWater Bandit connects a hose to previously unattachable water sources, allowing users to stop wasting water from water hose leaks. This product is great for RV water hoses, garden hoses, and more. Camco RV accessories will enhance the camping experience!CompatibilityWater Bandit fits most standard hoses. It works with damaged or stripped faucet threads and faucets without threads.Dimensions & FeaturesThis product measures 3 ¼-inches long. It features a standard ABS male water connection and a highly flexible silicone-polymer sleeve.Simple & Quick to InstallEasily slip the Water Bandit over a damaged faucet while the threaded end is attached to the hose. This product is not intended for non-threaded kitchen sink faucets or use under pressure.Drinking Water Safe & Low Lead CertifiedWater Bandit is compliant with all federal and state-level low-lead laws. It is CSA Low Lead Content Certified to NSF/ANSI 372. Specifications: Type: Fittings & Hoses Box Dimensions: 2"H x 4"W x 9"L WT: 0.2 lbs UPC: 014717224840

Read more less

3/8" BSP x 1/2" NPT - BrassAdapters convert 3/8” BSP-M to 1/2” NPT-M or 1/2" NPS-M. Washers included.Specifications: Material: Brass Brass Thread Type: 3/8” BSP-F and 1/2” NPT-M

Read more less

Marine Toilet Silent Electric Comfort - 12VSilent electric comfort toilet with seperated flushing and waste disposal cycle. Including electronic 3 function control panel, before use, after use and short use plus a trimmer to regulate the flow rate.Water is from existing pressurized water system onboard with 12V solenoid valve (PN 07-66-030) or 12V flush pump (PN 07-66-032)- not included! Silent operation and low water consumption. Easy to clean white regular ceramic bowl and white thermoplastic softclose seat.Port conections inlet 19mm (3/4″), outlet 25mm or 38mm (1″ or 1,5″). Stable base for robust installation.Plug & play/ interchangeable with Jabsco 37045-1092, Johnson Pump 80-47232-01 and other 12V dual cycle electrical toilet models.Specifications: Weight: 9.3 kg/24 lbs Dimensions: 460/18.1L x 385/15.2H x 365/14.4W mm/in  Type: Dual Operation Electric *CE marked 94/25/ECC, ISO8846 Small Craft, Electromagnetic compatibility 89/336/EEC, EN51014 1993/radio disturbance Specifications: Color: White Size: Household Size Inlet Size: 3/4" Operation Method: Electric Outlet Size: 1" or 1-1/2" Rinse Water: Fresh Volts: 12v Type: Toilet Box Dimensions: 16"H x 17"W x 19"L WT: 28.3 lbs UPC: 7340176601575

Read more less

Toilet Standard Electric EVO Compact - 12VStandard electric compact toilet with a combined electrical 12V macerator and pump for waste disposal and flushing in one single operation.Including one touch electrical control panel. Easy to clean white ceramic bowl and white wooden seat. Stable base for robust installation. Port conections inlet 19mm (3/4″), outlet 25mm or 38mm (1″ or 1,5″).Plug & play/ interchangeable with Jabsco 37010-0090, Johnson Pump 80-47435-01 and other single operated electrical toilet models.Specifications: Weight: 9 kg/24 lbs Dimensions: 420/16.5L x 390/15.35H x 335/13.2W mm/in  Type: Single Operation Electric *Certification: CE marked 94/25/ECC, ISO8846 Small Craft, Electromagnetic compatibility 89/336/EEC, EN51014 1993/radio disturbance Specifications: Size: Compact Size Color: White Inlet Size: 3/4" Operation Method: Electric Outlet Size: 1" or 1-1/2" Rinse Water: RAW Volts: 12v Type: Toilet Box Dimensions: 16"H x 18"W x 19"L WT: 27.35 lbs UPC: 7340176601490

Read more less

Seaward 6 Gallon Hot Water Heater with Front Heat Exchager - White Epoxy - 120V - 1500WWhale Electric Water Heaters includes model with the very latest technology. All heaters are manufactured from the highest quality materials and designed to specifically withstand harsh marine conditions.The White Epoxy Coated Aluminium cases are well-suited to installation in many of today's engine rooms. Their white appearance blends in well with existing equipment and the coated aluminium material offers corrosion resistance.Features and Benefits Multiple versions to suit your installation Robust Manufacturing Safety controls Magnesium anodes available separately Sturdy, robust exteriors Ignition protected WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gallons: 6 Heat Exchanger: Yes Volts: 120v Box Dimensions: 14"H x 14"W x 23"L WT: 18.4 lbs UPC: 766478947956

Read more less

AquaT Marine Manual ToiletThe fine finish and well thought-through design of these toilets is remarkable. Made from white vitreous porcelain, and with corrosion resistant parts throughout, the Johnson Pump AquaT marine toilet, is quiet, robust and easy to clean.The AquaT toilet will give you years of trouble free operation. The manual version incorporates an ergonomically designed, hand-powered piston pump that can be mounted for either left-hand or right-hand use. When spare parts such as a new seat or valve are needed, you'll find Johnson Pump's global network of distributors at your service.It's probably fair to think of most toilets as commonplace products, but look at the features and you're sure to see that the AquaT is far from ordinary. Quiet, hygienic and reliable, the Johnson Pump AquaT marine toilet is perfect for almost any marine toilet room.CE-approvedFeatures Whisper quiet operation Self-priming pump Clean lines - pleasing to the eye Hygienic, easy-to-clean vitreous china bowl and exterior surfaces Robust wooden seat with durable baked enamel finish Low water consumption (2-2.5 l/flush) makes the most of holding tank capacity Versatile plumbing connection options Automatic back-flow prevention Available in comfort or compact bowl sizes Designed for virtually any onboard mounting position May be installed above or below the waterline Suitable for OEM or replacement installation Corrosion resistant materials throughout Long service life Ergonomic pump handle for ease of use Pump can be mounted left or right of the toilet bowl Innovative brake bushing prevents annoying leakage at the handle Specifications: Color: White Inlet Size: 3/4" Operation Method: Manual Outlet Size: 1-1/2" or 1" Volts: 12v Type: Toilet Box Dimensions: 16"H x 17"W x 19"L WT: 27.5 lbs UPC: 7330717009779 Owner's Manual (pdf)

Read more less

Little Pal Utility PumpCompact polished brass multi-purpose hand pump Ideal for small engine and gearbox oil drain Simply pump old oil out with dipstick probe Oil and corrosion resistant brass and neoprene construction with up to 1 gpm output Small enough to fit any tool box WARNING: This product can expose you to chemicals including STYRENE which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Minute: 1 GPM Outlet Size: 1/2" Type: Manual Box Dimensions: 2"H x 8"W x 11"L WT: 1 lbs UPC: 671880028622 Quick Guide (pdf)

Read more less

1700 Series Water Heater120v20 GallonW/O Engine Heat ExchangerThe "1700 Series" water heater provides hot water for galley and shower. Dense foam insulation provides better and longer heat retention than traditional fiberglass. The tank itself is protected by a 75 PSI T& P (temperature and pressure) relief valve. The cylindrical design of the tank enables it to withstand more pressure than a cube shaped tank.Heat exchanger models can be connected to the engine cooling system. This provides the added convenience of hot water when underway or generator power is not available. The innovative heat exchanger is over seven feet in length and is evenly coiled throughout the interior of the tank, providing hot water rapidly and efficiently.Raritan's water heaters use an ignition protected thermostat. Although it is factory set to 120°F, it is adjustable from 110° to 160°F and has a safety shut down limit of 190°F. All models and sizes have the plumbing connections on the same side to simplify installation. Hot and cold water connections are 3/4" male NPT (National Pipe Thread). Heat exchanger connections are 3/4" female NPT.Benefits: Simple installation - retrofits to most on-board pressure systems Proven long-life design Withstands the rigors of the marine environment Glass-lined steel tank is more durable than stainless steel Attractive polymer jacket resists corrosion from dampness Ignition-protected, adjustable thermostat Round tanks are designed to withstand more pressure than square tanks Glass-lined steel tank for long life and high efficiency Environmentally friendly CFC-free foam insulation Replaceable magnesium anode to protect tank and neutralize acids in the water The tank is covered by a five-year Limited Warranty Each unit is assembled by hand, individually tested and backed by Raritan's two-year Limited Warranty and legendary technical support team WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gallons: 20 Heat Exchanger: No Volts: 120v Box Dimensions: 22"H x 22"W x 28"L WT: 65 lbs UPC: 085462001598 Owner's Manual (pdf)Brochure (pdf)

Read more less

18A Float SwitchThe 02-Series Automatic Float Switch transforms any manual bilge pump into an efficient and reliable automatic system. Designed with a unique ball-bearing activation mechanism, this float switch provides superior reliability and longevity compared to traditional reed switches. Built to handle bilge pumps with a maximum current draw of 18A, the switch is compatible with 12V, 24V, and 32V DC systems, making it versatile for a variety of marine applications.Fully submersible and made with high-quality ABS material, the switch is sealed using ultrasonic welding to ensure leak-proof operation. With a compact design and straightforward installation, it seamlessly integrates into any marine system. The ignition-protected construction and mercury-free design guarantee safe and eco-friendly performance, while its long lifespan ensures consistent operation through millions of cycles.Features: Converts Manual Bilge Pumps to Automatic: This float switch transforms any compatible bilge pump into an automatic system, activating the pump when water levels reach 2.36 inches and deactivating it at 1.18 inches. Unique Ball Bearing Design: Features an internal weighted ball bearing activation mechanism for superior reliability and smoother operation compared to traditional reed switch designs. Fully Submersible and Leak-Proof: Constructed with high-quality ABS material and sealed using ultrasonic welding, the switch is both durable and fully submersible for tough marine environments. Mercury-Free and Eco-Friendly: Designed without mercury, ensuring safe operation for the environment while complying with international marine safety standards. High Current Capacity: Handles up to 18A at 12V, making it compatible with a wide range of bilge pumps and ideal for demanding marine applications. Easy Installation: The compact and user-friendly design allows for straightforward installation, reducing setup time and effort. Long-Life and High Switching Frequency: Built to withstand up to 10 million cycles, this switch ensures dependable performance for years of use. Ignition-Protected Construction: Meets ISO 8846 Marine standards, making it safe for installation in engine compartments or confined spaces. Specifications: Wire Load: 3 ft. Dimensions: 7.68" x 5.71" Weight: 0.29 lbs Specifications: Operation: Automatic Box Dimensions: 2"H x 5"W x 8"L WT: 0.5 lbs UPC: 817683022942 Brochure (pdf)

Read more less

Par-Max HD4 Heavy Duty Water Pressure Pump - 24V - 4 GPM - 40 PSIHD (Heavy Duty) models include a wider diameter motor with a powder coated shell, cast aluminum endbells and lower housing to improve pressure capability and life. Available in configurations up to 6 GPM (23 LPM) and 60 PSI (4.1 BAR), these pumps deliver exceptional performance. Standard models provide good performance in an economical footprint. These configurations are available in 1-3 GPM, perfect for vessels with 1-3 outlets. A plastic housing protects the motors on these units from corrosion. Features: Co-molded diaphragm technology for long life and durability HD models feature heavy duty, motors and cast aluminum lower housings which allow for longlife, even at high pressures Efficient and quiet operation Integrated, sealed pressure switch for on-demand operation Self-priming allows for installation versatility Can run dry without damage Quick connect ports for ease of installation, servicing, and maintenance Vibration dampening mounting feet Equipped with integrated bypass module to reduce cycling and provide smoother flow Specifications: Motor design: Brushed, permanent magnet TENV  Pumphead upper housing material: Glass fiber reinforced polypropylene  Diaphragm: Co-molded TPV  Check valves: EPDM  Max inlet pressure: 30 PSI (2.1 Bar)  Fluid temperature range: 32°F – 140°F (0°C – 60°C)  Dry self-priming capability: 7ft min (2.13m/min)  Certifications: CE, ISO8846, RCM Ingress Protection: IPX6 WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Volts: 24v Max PSI: 40 Gallons Per Minute: 4 GPM Box Dimensions: 6"H x 6"W x 15"L WT: 7.9 lbs UPC: 671880841894 Brochure (pdf)

Read more less

LoPro 900GPH Bilge Pump - AutomaticThe Rule LoPro™ 900 Automatic is a fully automatic low profile Bilge Pump with a 900 gallons per hour capacity. Designed for tight spaces, the height of the pump is only 2-1/4".It features a threaded discharge nozzle to which you can attach either a straight or a 90° fitting (included). In addition, you may use the tricuspid check valve (included) on the straight fitting to minimize the back flow of water. The entire discharge body swivels up to 180° for ease of installation. The hose attached can also swivel 360° to route the hose perfectly. The pump features a sensing switch to control the pump. Unique to this pump are two settings, a high setting where the pump turns on when the water reaches 1-3/4" and a low setting where the pump turns on when the water reaches 1".Features: 900 GPH Low Profile Bilge Pump Fits into hard to reach places Fully Autuomatic- two settings available, high and low Threaded discharge ports with mulitiple fittings available Features a tricuspid check valve to minimize back flow of water 3 Year WarrantyWARNING: This product can expose you to chemicals including STYRENE which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Volts: 12v Operation: Automatic Gallons Per Minute: 15 GPM Gallons Per Hour: 900 GPH Type: Electric Box Dimensions: 4"H x 9"W x 12"L WT: 1.7 lbs UPC: 042237114372 Brochure (pdf)

Read more less

1100 GPH Automatic AMP Sensor Bilge Pump - 12VThe B31-Series Automatic Bilge Pump offers unparalleled efficiency and reliability for marine applications. Designed with a compact, automatic operation, this high-performance pump eliminates the need for a separate float switch. With a flow rate of 1100 GPH and compatibility with both 12V and 24V systems, it is perfect for a wide range of vessels. Durable, marine-grade materials and advanced features ensure a long service life, while the quick-connect components make installation and maintenance a breeze. Whether you're upgrading or replacing a bilge pump, the B31-Series delivers powerful performance and unmatched convenience.Features: Quick-Connect Wiring: Features threaded outlets and quick-connect wiring for seamless installation and maintenance. Replace the motor or base in seconds, not hours! Allows to user to switch the pump out in seconds between the quick disconnect base, quick disconnect wiring, and quick disconnect plumbing. Automatic Operation: No float switch is required. The pump checks for water every 2.5 minutes and activates only when needed, conserving energy and ensuring optimal performance. High Flow Capacity: Capable of pumping 1100 GPH, this pump is ideal for quickly removing bilge water, even in challenging marine conditions. Durable Marine-Grade Materials: Built with a stainless-steel motor shaft, moisture-tight seals, and marine-grade, silicon-blocked wiring, it is designed to withstand harsh marine environments. Submersible and Ignition Protected: Fully submersible and meets or exceeds ISO 8846 and ISO 8849 standards for safe operation in explosive atmospheres. Built-In Check Valve: Prevents water backflow, ensuring that your bilge remains dry and efficient between pump cycles. Dual Outlet Compatibility: Includes fittings for 3/4 inch and 1-1/8 inch hoses, offering flexible compatibility with existing plumbing. Warranty: Backed by a 4-year warranty, providing peace of mind and reliable performance. Specifications: Weight: 1.03 lbs Flow Rate: 1100 GPH Volts: 12V Current: 4.0A Head: 12.0' (4.0m) Included Components: Dual-size straight fitting (3/4 inch and 1-1/8 inch) Optional 90-degree angled fitting (1-1/8 inch) Quick-connect wiring for hassle-free setup Specifications: Gallons Per Hour: 1100 Operation: Automatic Outlet Size: 3/4" & 1-1/8" Volts: 12 Box Dimensions: 3"H x 5"W x 5"L WT: 1.3 lbs UPC: 817683023017

Read more less