Marine Plumbing & Ventilation

Tsunami MK2 Manual Bilge Pump - T1200 - 1200 GPH & 24VThe Tsunami Mk2 is the only manual bilge pump that eliminates airlocks. This is done by the Patented X-Air™ Impeller, which ejects trapped air in the pump and pipework. Also, the Tsunami Mk2 is the most reliable manual bilge pump in freshwater applications, considering it has 40% better protection against water ingress and electrolysis vs. the Mk1 pump.Easy Installation & Service  GPH (Gallons Per Hour): 1200 90° rotatable elbow outlet allows users to install the pump anywhere in a full 360° orientation Backward compatible hole pattern and motor cartridges of Tsunami Mk1 bilge and aerator pumps External mounting feet and integrated outlet reduces time and effort Service pump cartridges from hard-to-reach areas using only one hand Specifications: Rated Volts DC: 24V Fuse Size: 2 Amp Wire Length: (inch) 29" / (mm) 735 Hose Diameter: (inch) 1" and 1-1/8" *Must be used with appropriate Tsunami outlet Specifications: Gallons Per Hour: 1200 GPH Gallons Per Minute: 20 Operation: Non-Automatic Outlet Size: 1" or 1-1/8" Type: Pumps/Drives Volts: 24v Box Dimensions: 4"H x 5"W x 7"L WT: 1.2 lbs UPC: 022697024190 Quick Guide (pdf)

Read more less

HD2000 Heavy Duty Bilge Pump - 24V & 2000 GPHHeavy-Duty Blige Pumps integrate the highest quality bearings, brushes, alloys, and magnets designed to withstand extreme usage cycles. The pump also employs an exclusive shaft and motor compartment, reducing wear and significantly extending pump life. Advanced resin compositions are incorporated in the exterior to resist chemicals such as engine oil, aggressive detergents, and hose plasticizers. Attwood’s Heavy Duty bilge has unsurpassed durability and efficiency in a compact design to ensure electrical energy is converted to the pump rather than excess heat. Attwood's highest capacity pump, the ball-bearing design provides for cooler motor operation and longer life. Also, this pump delivers over 2000 GPH at open flow while drawing less than 7-amps.Features: High-quality bearings, brushes, alloys, and magnets Advanced resin compositions incorporated into the exterior Specifications: Rated Voltage: 24 Fuse Size: 7 Amp Hose Size: (inch) 1-1/8" inner diameter Specifications: Gallons Per Hour: 2000 GPH Operation: Non-Automatic Outlet Size: 1-1/8" Type: Pumps/Drives Volts: 24v Box Dimensions: 6"H x 6"W x 7"L WT: 2.4 lbs UPC: 022697477040 Quick Guide (pdf)

Read more less

Stainless Steel Thru-Hull Standard Straight Barbed - 5/8" Inner DiameterPolish your image with these beautiful, durable stainless steel fittings. Why specify plastic parts when these fittings will last the life of the boat?Rugged Stainless Construction: Cast from certified Enhanced 316 Stainless Steel alloy for strength and lifetime corrosion-resistance All visible areas are polished to a mirror finish, then passivate each part for additional protection Thick steel sidewalls withstand continual stress and hose flexing Faster, Simpler Installation: Each Thru-Hull is available with a new silicone gasket A channel under the flange holds a bead of sealant, making it easier to apply a trouble-free seal All models have wrench flats or an end notch to hold as a gripping surface; one installer can tighten all connections from inside the hull The barbed tail ends provide plenty of room to hold multiple clamps Stainless Steel Straight Thru-Hulls, BarbedStandard Thread model has a full-length thread for thick hulls and easy tighteningSpecifications: Hose size: (inch) 5/8" inner diameter Flange Diameter: (inch) 1-7/8" Thread O.D. (outside diameter): (inch) 1"  Thread Length: (inch) 2" Barb Length: (inch) 1-1/4" Total Length: (inch) 3-3/4" Install Hole Saw Size: (inch) 1-1/8"  Thread NPSM: (inch) 3/4" Max Hull Thickness: (inch) 1-1/16" *Stainless Steel Thru-Hull Connectors are designed for installation above the water line only Specifications: Hose Size: 5/8" Material: Stainless Steel Box Dimensions: 2"H x 3"W x 6"L WT: 0.5 lbs UPC: 022697665461 Quick Guide (pdf)

Read more less

Stainless Steel Thru-Hull Short Straight Barbed - 3/4" Inner DiameterPolish your image with these beautiful, durable stainless steel fittings. Why specify plastic parts when these fittings will last the life of the boat?Rugged Stainless Construction: Cast from certified Enhanced 316 Stainless Steel alloy for strength and lifetime corrosion-resistance All visible areas are polished to a mirror finish, then passivate each part for additional protection Thick steel sidewalls withstand continual stress and hose flexing Faster, Simpler Installation: Each Thru-Hull is available with a new silicone gasket A channel under the flange holds a bead of sealant, making it easier to apply a trouble-free seal All models have wrench flats or an end notch to hold as a gripping surface; one installer can tighten all connections from inside the hull The barbed tail ends provide plenty of room to hold multiple clamps Stainless Steel Straight Thru-Hulls, BarbedShort Thread is a more compact size, which allows installation near corners and in confined areasSpecifications: Hose size: (inch) 3/4" inner diameter Flange Diameter: (inch) 1-7/8" Thread O.D. (outside diameter): (inch) 1"  Thread Length: (inch) 1" Barb Length: (inch) 1" Total Length: (inch) 2-1/2" Install Hole Saw Size: (inch) 1-1/8"  Thread NPSM: (inch) 3/4" Max Hull Thickness: (inch) 5/8" *Stainless Steel Thru-Hull Connectors are designed for installation above the water line only Specifications: Hose Size: 3/4" Material: Stainless Steel Box Dimensions: 2"H x 3"W x 6"L WT: 0.4 lbs UPC: 022697665416 Quick Guide (pdf)

Read more less

Electronic Bilge Switch - 12/24VThe 12/24V electronic bilge switch activates your bilge pump automatically when water exceeds the acceptable level and deactivates when the water has been removed. Switches DC positive and can be used with PN 01-66-027, Bilge Pump Panel 3-way 12/24V, in combination with any bilge pump. For fully automatic removal of your bilge water connect a switch to your electrical bilge pump. Fully sealed without any moving parts. Will not corrode and are not affected by oil or debris. *Note: The product picture shows a similar product and the electronic bilge switch looks slightly different from the digital bilge switch.

Read more less

1/2" Self-Captivating Drain Plug (Long)Features: For Use In freshwater or saltwater 316 stainless steel Two #10 fasteners (sold separately)

Read more less

Portable Washdown Pump Kit Everything you need to power-wash your boat or RV in a convenient stow-and-go carrier.  This easy-to-use washing kit is built with a high-pressure diaphragm pump that is self-priming, can run dry without damage, and won't overheat. Just connect to a garden hose or use the supplied input hose to draw water directly from the lake, ocean, or even a bucket and you are ready to wash. Features: Smooth, quiet operation and flow Low power draw Easy, quick-connect fittings Technical Specifications: Flow Rate - 2 GPM Pressure - 100 PSI Carrier Dimensions (L x W x H) - 13.8" x 11.3" x 12.5" Voltage - 12 V In the Box:  Sealed pump in case Adjustable spray nozzle Input water hose with quick-connect fitting and filter - 6.6' (2 M) Spray hose with quick-connect fitting - 12.3' (3.75 M) Power cord - battery clips (for direct battery connection) and a DC power port adapter WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Minute: 2 Max PSI: 100 Volts: 12 Box Dimensions: 12"H x 13"W x 14"L WT: 12.2 lbs UPC: 666996100683 Owner's Manual (pdf)

Read more less

Super-Duty Washdown Pump Self-priming, 12V diaphragm pump with sealed, pressure switch control and vibration dampening polymer isolating mounting base. Washdown pumps are ideal for cleaning leisure boats, fish boxes, anchor chains, and dinghies. Suitable for fresh and saltwater. Built for heavy-duty, on-board applications, this TRAC washdown pump has a 5.3 GPM flow rate and boasts 70 PSI. A professional-grade pump, this TRAC washdown pump can be used for both marine and RV applications.Features: Smooth, quiet operation and flow Runs dry without damage Seamless motor shell  Low power draw Ignition protection Easy, quick-connect fittings Technical Specifications: Flow Rate - 5.3 GPM Pressure - 70 PSI Voltage - 12 V *Sold as an IndividualWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Minute: 5.2 GPM Max PSI: 70 Volts: 12 Box Dimensions: 6"H x 6"W x 11"L WT: 6.8 lbs UPC: 666996100775 Owner's Manual (pdf)

Read more less

Submersible Thru-Hull Pump - 800/1100 GPHThe TRAC 69321 Submersible Thru-Hull Pump is a self-priming, 12V centrifugal pump that's ideal for all watercraft.  Designed for easy installation and retrofitting, this pump features a cartridge-style pump head and a universal strainer base. This versatile thru-hull pump comes packaged with a 1-1/8" 1100 GPH outlet and a 3/4" 800 GPH outlet.  Each outlet has an O-ring for easy maneuverability without stripping.  It can run dry without damage and is designed to have a low-power draw. The universal strainer is compatible with Attwood Tsunami, Rule, and Johnson/Mayfair cartridge pumps.  The screw mounting holes match Rule and Attwood Tsunami pumps. Features: Runs dry without damage Meets ABYC, NMMA, Coast Guard, and ISO marine standards Technical Specifications: Operation - Non-automatic Flow Rate (3/4" outlet) - 800 GPH Flow Rate (1-1/8" outlet) - 1100 GPH Voltage - 12 V *Sold as an IndividualWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Hour: 800/1100 GPH Gallons Per Minute: 10/18.33 Operation: Non-Automatic Outlet Size: 3/4" or 1-1/8" Type: Pumps/Drives Volts: 12v Box Dimensions: 3"H x 6"W x 12"L WT: 1.25 lbs UPC: 666996100171 Owner's Manual (pdf)

Read more less

11850 - 11 Gallon Water Heater - 240V Kuuma's Premium 11 Gallon Water Heater is perfect for a new installation or as a replacement to an existing water heater.   Constructed of corrosion-resistant, marine-quality aluminum and heats water with the use of an electrical power or integrated heat exchanger.Features: Ignition protected controls Mounting tabs Manual reset Technical Specifications:  Capacity - 11 Gallon Electrical Input - 240V Orientation - Horizontal Mounting Brackets - Side to Side Heating Source - Front heat exchange Maximum Water Temperature - 210°F T & P Valve Type - 100psi and 210° F Wiring Configuration - L1 and N Dimensions (W x H x D) - 18-7/8" x 16-1/4" x 21-5/8" *Sold as an Individual WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gallons: 11 Heat Exchanger: Yes Volts: 240 Box Dimensions: 19"H x 19"W x 26"L WT: 29.25 lbs UPC: 014717118507 Owner's Manual (pdf)Brochure (pdf)

Read more less

ARG-3 Strainer Service KitARG Series raw water strainer service kit. Compatible with the Groco ARG 1500, 2015, 2520, 2500, 3015, 3020, 3025 and 3000 series strainers.In the Box: (1) - 2-256 - Sight Glass O-Ring (1) - 2-238 - Cap O-Ring (1) - 2-234 - Cap O-Ring (4) - PFW-2 Set - Sight Glass Bolt Washer (1) - 2-011 - Drain Plug O-ring Before 08/01/01 (1) - 2-111 - Drain Plug O-ring After 08/01/01 *Sold as an Individual  Specifications: Type: Service Kits Box Dimensions: 1"H x 7"W x 7"L WT: 0.05 lbs UPC: 742985065062 Owner's Manual (pdf)

Read more less

Screw-In Element - 1500W - 240V - ULWD LL *BulkCamco's 1500W 240V screw-in type high watt density water heater elements can be used in most replacement situations of the same wattage and voltage. High Watt Density are the most common and the same type of elements provided with most water new heaters. They are easy to install and come with detailed instructions on how to replace your old element. Features: High watt density water heater element 240V/1500W UL Listed Easy to Install Bulk

Read more less