Battery Temperature Sensor (BTS)Designed for use with TRUECharge2 battery chargers.The BTS mounts on a terminal post of a battery in a bank or on the side of a battery and measures its temperature. It sends precise information to the charger or charge controller, which automatically adjusts voltage to help ensure full battery charge depending on the ambient temperature of your battery installation.WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)
C-Series Digital Remote with 50' CableMeter, digital volt, C-Series remote with 50' cableUsed with C35/40/60 Charge ControllersWARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov.
C-Series Solar Charge Controller - 12 AmpsPV charge, lighting and load controllerThe C12 charge, lighting, or load controller is uniquely sophisticated. As a charge controller, it features three-stage charging, user definable voltage parameters, and automatic equalization.Standard in the C12’s load control circuitry are field adjustable low voltage disconnect and reconnect points, along with a five minute low battery disconnect signal. The C12 also functions as a lighting controller.Lighting run time is adjustable from two to eight hours or can be set from dusk to dawn operation. It is used worldwide in a variety of applications, including remote village lighting systems and automatic outdoor lighting. An optional battery temperature sensor manages battery charging based on battery temperature.Features:Improve battery life with pulse width modulated (PWM) multi-stage temperature compensated charging
Two-year standard warranty
PV charge and load controller
Automatic lighting controller
Electronic detection of short-circuit, overload, over-temperature and reverse polarity conditions
Tolerance to hostile environments with conformal-coated boards and powder-coated enclosure
Field adjustable voltage and battery set point
Automatically disconnects from the battery at night
Compatible with negative ground and ungrounded systems
WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov.
C-Series Solar Charge Controller - 35 AmpsPV charge, diversion and load controllerThe C35 and C60 are field configurable for 12 V and 24 V operation. The C40 may be configured for 12 V, 24 V, or 48 V operation. C35, C40 and C60 charge controllers can be used as a charge, diversion, or load controller and come with a standard multi-color charge status LED face plate.A Controller for Virtually any DC Charging Source. The C60 is a fully solid state, microprocessor-driven controller that is UL and cUL listed. C Series controllers may be configured for PV battery charging, or DC load control or DC diversion operation. Whatever the charging source, a C Series controller is sure to meet your DC controller needs.Silent Microprocessor Control-All C Series controllers have a powerful microprocessor at their core which increases system performance and maximizes battery life. They are fully solid state and operate silently.Features:
Improve battery life with pulse width modulated (PWM) multi-stage temperature compensated charging
Two-year standard warranty
PV charge, diversion, load controller
Available remote display with cumulative AMP hours
Electronic protection against short-circuit, overload, and over-temperature conditions
Tolerance to hostile environments with conformal-coated boards and powder-coated enclosure
Field adjustable voltage and battery set point
Automatically disconnects from the battery at night
Compatible with negative ground and ungrounded systems
WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov.
C-Series Solar Charge Controller - 40 AmpsPV charge, diversion and load controllerThe C35 and C60 are field configurable for 12 V and 24 V operation. The C40 may be configured for 12 V, 24 V, or 48 V operation. C35, C40 and C60 charge controllers can be used as a charge, diversion, or load controller and come with a standard multi-color charge status LED face plate.A Controller for Virtually any DC Charging Source. The C60 is a fully solid state, microprocessor-driven controller that is UL and cUL listed. C Series controllers may be configured for PV battery charging, or DC load control or DC diversion operation. Whatever the charging source, a C Series controller is sure to meet your DC controller needs.Silent Microprocessor Control-All C Series controllers have a powerful microprocessor at their core which increases system performance and maximizes battery life. They are fully solid state and operate silently.Features:
Improve battery life with pulse width modulated (PWM) multi-stage temperature compensated charging
Two-year standard warranty
PV charge, diversion, load controller
Available remote display with cumulative AMP hours
Electronic protection against short-circuit, overload, and over-temperature conditions
Tolerance to hostile environments with conformal-coated boards and powder-coated enclosure
Field adjustable voltage and battery set point
Automatically disconnects from the battery at night
Compatible with negative ground and ungrounded systems
WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov.
C-Series Solar Charge Controller - 60 AmpsPV charge, diversion and load controllerThe C35 and C60 are field configurable for 12 V and 24 V operation. The C40 may be configured for 12 V, 24 V, or 48 V operation. C35, C40 and C60 charge controllers can be used as a charge, diversion, or load controller and come with a standard multi-color charge status LED face plate.A Controller for Virtually any DC Charging Source. The C60 is a fully solid state, microprocessor-driven controller that is UL and cUL listed. C Series controllers may be configured for PV battery charging, or DC load control or DC diversion operation. Whatever the charging source, a C Series controller is sure to meet your DC controller needs.Silent Microprocessor Control-All C Series controllers have a powerful microprocessor at their core which increases system performance and maximizes battery life. They are fully solid state and operate silently.Features:
Improve battery life with pulse width modulated (PWM) multi-stage temperature compensated charging
Two-year standard warranty
PV charge, diversion, load controller
Available remote display with cumulative AMP hours
Electronic protection against short-circuit, overload, and over-temperature conditions
Tolerance to hostile environments with conformal-coated boards and powder-coated enclosure
Field adjustable voltage and battery set point
Automatically disconnects from the battery at night
Compatible with negative ground and ungrounded systems
WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov.
50 feetWARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov.
DC Battery Cables (4G) + Fuse L-KitPre-terminated DC battery cables and fuse block kit for a fast and easy installation between your inverter and battery.Specifications:
1400-2300W Inverters
8’ foot 2-0 Cables + Fuse L-Kit
Specifications:
Type: Cables
Box Dimensions: 4"H x 10"W x 13"L WT: 8.8 lbs
UPC: 715535915346
DC Battery Cables (4G) + Fuse M-KitPre-terminated DC battery cables and fuse block kit for a fast and easy installation between your inverter and battery.Specifications:
900-1300W Inverters
8’ foot 2AWG Cables + Fuse M-Kit
Specifications:
Type: Cables
Box Dimensions: 4"H x 10"W x 13"L WT: 5 lbs
UPC: 715535915384
DC Battery Cables (4G) + Fuse S-KitPre-terminated DC battery cables and fuse block kit for a fast and easy installation between your inverter and battery.Specifications:
600-800W Inverters
8’ foot 4AWG Cables + Fuse S-Kit
Specifications:
Type: Cables
Box Dimensions: 4"H x 10"W x 13"L WT: 3.5 lbs
UPC: 715535915469
DC Battery Cables (4G) + Fuse XL-KitPre-terminated DC battery cables and fuse block kit for a fast and easy installation between your inverter and battery.Specifications:
2400-3000W Inverters
8’ foot 4-0 Cables + Fuse XL-Kit
Specifications:
Type: Cables
Box Dimensions: 6"H x 11"W x 15"L WT: 15 lbs
UPC: 715535915421
Freedom 458 Inverter/ChargerAC Power Inverter with High Surge Capability, 3-Stage ChargerWith filtered modified sine wave output, Freedom inverter/chargers run virtually anything, from electrical equipment to appliances and electronics in your RV. Temperature controlled multistage charging ensures that your batteries are recharged quickly, and automatic shutdown and other safety features protect your expensive deep-cycle batteries from excessive depletion. For inverter/charger control and basic system monitoring, use the Freedom Basic Remote. For advanced battery monitoring and remote control, Freedom 458 systems can be paired with optional Link instrumentation.Product Features
MSW AC power inverter with high surge capability
Automatic 3-stage battery charger
Temperature compensation with equalization stage provides optimal charging of deep cycle batteries
Built-in transfer switch automatically transfers between inverter power and incoming AC power
Power sharing prevents source AC input circuit breaker from tripping
Customized settings can be programmed with the Freedom Basic Remote or Link 1000 panels
Includes battery temperature sensor
30 month warranty
Protection Features
Over voltage and under voltage protection
Over-temperature protection
Overload protection
Short circuit protection
Electrical Specifications - Inverter
Output power (continuous): 2000W
Surge power (AC amps): 50A
Output frequency regulation: 60Hz
Inverter voltage regulation: 120V +/-5% true RMS
Output wave form: Modified sine wave
Efficiency (full load): 85%
Peak efficiency: 92%
No load current draw (idle mode): 0.12A
AC output connections: Dual - 20/15 Circuit Breakers
AC input connections: Single
AC transfer switch: 30A
Electrical Specifications - Charger
Charge rate: 100A DC
AC input voltage range: 90 130 VAC
Battery voltage (nominal): 12 VDC
Battery voltage range: 10.0 15.5 VDC
Low battery cut-out: 10.0 VDC
AC input (max. charge mode): 21A AC
Bulk charge voltage: 14.3 VDC***
Float charge voltage: 13.4 VDC***
Equalize charge voltage: 16.3 VDC
Charge control: 3-stage
Battery type settings: Wet / Gel 1 / Gel 2 / AGM
Equalization: Yes
Temperature sensitive charging: Yes
***Default value varies with battery type and temperatureWARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications:
Outlet Qty: None
Charging Banks: 1
Inverter Output Voltage: 120v
Inverter Input Voltage: 12v
Charger Input - Voltage: 120v
Inverter Cont. Output Wattage: 2000w
Charger Output Voltage: 12v
Charger Output - Amps: 100a
Box Dimensions: 13"H x 15"W x 19"L WT: 55.7 lbs
UPC: 647912106149
Owner's Manual (pdf)Brochure (pdf)