Products

Liquid 4-Liter Refill - Non-Hazmat, Non-Flammable & Non-ToxicCorrosion Block is a clean fluid that actively protects metal using advanced polar bonding chemistry.  Synthetic additives in Corrosion Block completely penetrate corrosion cells…replacing the salt water which is then allowed to evaporate.  Corrosion Block’s hydrophobic film remains to further protect the metal acting like an “OFF SWITCH” for corrosion. Unlike waxy products Corrosion Block then leaves a clean clear moisture proof/hydrophobic film to prevent new corrosion formation. deeply penetrating into joints, connectors and around fasteners. Features: Formulated to KILL CORROSION ON CONTACT from completely submerged, to equipment affected by high moisture content in the air Corrosion Block is a clean fluid that actively protects metal and electronics using advanced polar bonding chemistry Synthetic additives in Corrosion Block completely penetrate corrosion cells...replacing the salt water which is allowed to evaporate A hydrophobic film remains to further protect the metal acting like an "OFF SWITCH" for corrosion Corrosion Block is safe; it is non-toxic and non-flammable, also the propellant used in our aerosol products is non-flammable Used worldwide to protect electrical and mechanical equipment in "Safety First" situations such  as Mining, Power Generating Stations, Fuel Depots, Gas and Petroleum refineries and more Protects: Switches Pressure Gauges Motor Operated Valves Terminal Strips Circuit Breakers Locks  Electronics Battery Terminals Running Lights Fuel Tanks Fuse Panels Connectors Alternator Leads Reefer Unit Wheels & Hubs Engines GPS Systems  Specifications: Type: Corrosion Protection Box Dimensions: 4"H x 7"W x 12"L WT: 8.05 lbs UPC: 770153200045 Brochure (pdf)

Read more less

Liquid Pump Spray - 4oz - Non-Hazmat, Non-Flammable & Non-Toxic *Case of 24*Corrosion Block is a clean fluid that actively protects metal using advanced polar bonding chemistry.  Synthetic additives in Corrosion Block completely penetrate corrosion cells…replacing the salt water which is then allowed to evaporate.  Corrosion Block’s hydrophobic film remains to further protect the metal acting like an “OFF SWITCH” for corrosion. Unlike waxy products Corrosion Block then leaves a clean clear moisture proof/hydrophobic film to prevent new corrosion formation. deeply penetrating into joints, connectors and around fasteners. Features: Formulated to KILL CORROSION ON CONTACT from completely submerged, to equipment affected by high moisture content in the air Corrosion Block is a clean fluid that actively protects metal and electronics using advanced polar bonding chemistry Synthetic additives in Corrosion Block completely penetrate corrosion cells...replacing the salt water which is allowed to evaporate A hydrophobic film remains to further protect the metal acting like an "OFF SWITCH" for corrosion Corrosion Block is safe; it is non-toxic and non-flammable, also the propellant used in our aerosol products is non-flammable Used worldwide to protect electrical and mechanical equipment in "Safety First" situations such  as Mining, Power Generating Stations, Fuel Depots, Gas and Petroleum refineries and more Protects: Switches Pressure Gauges Motor Operated Valves Terminal Strips Circuit Breakers Locks  Electronics Battery Terminals Running Lights Fuel Tanks Fuse Panels Connectors Alternator Leads Reefer Unit Wheels & Hubs Engines GPS Systems  Specifications: Type: Corrosion Protection Box Dimensions: 2"H x 2"W x 7"L WT: 7.2 lbs

Read more less

Liquid Pump Spray - 4oz - Non-Hazmat, Non-Flammable & Non-ToxicCorrosion Block is a clean fluid that actively protects metal using advanced polar bonding chemistry.  Synthetic additives in Corrosion Block completely penetrate corrosion cells…replacing the salt water which is then allowed to evaporate.  Corrosion Block’s hydrophobic film remains to further protect the metal acting like an “OFF SWITCH” for corrosion. Unlike waxy products Corrosion Block then leaves a clean clear moisture proof/hydrophobic film to prevent new corrosion formation. deeply penetrating into joints, connectors and around fasteners. Features: Formulated to KILL CORROSION ON CONTACT from completely submerged, to equipment affected by high moisture content in the air Corrosion Block is a clean fluid that actively protects metal and electronics using advanced polar bonding chemistry Synthetic additives in Corrosion Block completely penetrate corrosion cells...replacing the salt water which is allowed to evaporate A hydrophobic film remains to further protect the metal acting like an "OFF SWITCH" for corrosion Corrosion Block is safe; it is non-toxic and non-flammable, also the propellant used in our aerosol products is non-flammable Used worldwide to protect electrical and mechanical equipment in "Safety First" situations such  as Mining, Power Generating Stations, Fuel Depots, Gas and Petroleum refineries and more Protects: Switches Pressure Gauges Motor Operated Valves Terminal Strips Circuit Breakers Locks  Electronics Battery Terminals Running Lights Fuel Tanks Fuse Panels Connectors Alternator Leads Reefer Unit Wheels & Hubs Engines GPS Systems  Specifications: Type: Corrosion Protection Box Dimensions: 2"H x 2"W x 7"L WT: 0.3 lbs UPC: 770153200021 Brochure (pdf)

Read more less

1" Wheel Bearing KitIt may not be on the forefront of most drivers minds, but a trailer's wheels need to be cared for just like the wheels of a vehicle. This wheel bearing kit includes two bearing cones, two bearing cups, a grease seal, and a cotter pin. The bearings are designed to automatically maintain the correct internal pressure and not damage the seals. This kit fits a 1" diameter. Features: Features a 1" inside diameter Automatically maintains the correct internal pressure to avoid seal damage Specifications: Finish: Brushed Stainless Hub Warehouse: D25 Warranty: Limited lifetime warranty (one-year finish, one-year parts)

Read more less

1-7/8" Trailer Ball - 3/4" x 1-5/8" Shank  - 2,000 lb. Capacity - ChromeCURT 1-7/8" trailer balls are constructed from high-strength steel to match the towing power of class 1 or class 2 trailer hitch and ball mount and come with fine threads on the shank for improved holding strength. Having a trailer ball that matches your coupler size is absolutely essential. At CURT, the trailer balls are engineered to be precisely fitted. When we stamp 1-7/8" into the top of each hitch ball, we actually mean 1-7/8".This CURT tow ball features a ball capacity of 2,000 lbs. It is able to tow most utility trailers, boat trailers, campers, smaller livestock trailers, and some recreational vehicle haulers. (NOTE: Never exceed the lowest weight capacity of any towing component, i.e., the vehicle, hitch, trailer, etc.) As with any trailer, be sure that the towing equipment is capable of handling the load before hitching up. This trailer ball also features a 3/4" shank diameter, a 1-5/8" shank length, 0" of rise, and a nickel-chrome finish to protect against corrosion and wear. Like all CURT trailer balls, the 1-7/8" balls are tested for your safety and meet all U.S. VESC specifications.Features: It fits 1-7/8" couplers and accepts up to 2,000 lbs. GTW Constructed from high-strength, hot-forged steel Protected by a durable chrome-plated finish Zinc-plated hex nut and helical lock washer for secure mounting Features fine threads for superior holding strength Tested for safety to meet U.S. VESC V-5 specifications Specifications: Ball Capacity: 2,000 lbs Ball Diameter: 1-7/8 in. Finish: Chrome-plated Hub Warehouse: D25 Material: Forged steel Shank Diameter: 3/4 in. Shank Length: 1-5/8 in. Shank Rise: 0 in. Torque: 160 ft. lb. Warranty: Limited lifetime warranty (one-year finish, one-year parts) *The mounting platform must be at least 3/8 in. thick, and the hole size must not be more than 1/16 in. larger in diameter than the threaded shank

Read more less

1-7/8" Trailer Ball - 3/4" x 1-5/8" Shank - 2,000 lbs. - ChromeCURT 1-7/8" trailer balls are constructed from high-strength steel to match the towing power of class 1 or class 2 trailer hitch and ball mount and come with fine threads on the shank for improved holding strength. Having a trailer ball that matches the coupler size is essential. At CURT, the trailer balls are engineered to be precisely fitted. When CURT stamps 1-7/8" into the top of each hitch ball, CURT means 1-7/8".This CURT tow ball features a ball capacity of 2,000 lbs. It can tow most utility trailers, boat trailers, campers, smaller livestock trailers, and some recreational vehicle haulers. (NOTE: Never exceed the lowest weight capacity of any towing component, i.e., the vehicle, hitch, trailer, etc.) As with any trailer, be sure that the towing equipment can handle the load before hitching up. This trailer ball also features a 3/4" shank diameter, a 1-5/8" shank length, 0" of rise, and a nickel-chrome finish to protect against corrosion and wear. Like all CURT trailer balls, CURT's 1-7/8" balls are tested for users’ safety and meet all U.S. VESC specifications.Features: Fits 1-7/8" couplers and accepts up to 2,000 lbs. GTW Constructed from high-strength, hot-forged steel Protected by a durable chrome-plated finish Zinc-plated hex nut and helical lock washer for secure mounting Features fine threads for superior holding strength Tested for safety to meet U.S. VESC V-5 specifications Specifications: Ball Capacity: 2,000 lbs. Ball Diameter: 1-7/8 in. Color: Silver Finish: chrome-plated Hub Warehouse: D25 Material: Forge steel Part Type: 1-7/8 in. Trailer ball Shank Diameter: 0.75 in. Shank Length: 1-5/8 in. Shank Rise: 0 in. Torque: 160 ft. lb. Warranty: Limited lifetime warranty (one-year finish, one-year parts) *The mounting platform must be at least 3/8 in. thick, and the hole size must not be more than 1/16 in. larger in diameter than the threaded shank

Read more less

1-7/8" Trailer Ball - 3/4" x 2-1/8" Shank - 2,000 lb. Capacity - Stainless SteelOut of the monotony comes one name that rises above all others. CURT trailer balls are designed for strength, ease of use, and, ultimately, to get you to your destination without hassle. CURT 2" trailer hitch balls are constructed from quality steel and are made with precision to fit your 2" trailer coupler like a hand in a glove. They are able to tow most standard-duty and heavy-duty trailers, such as utility trailers, boat trailers, campers, livestock trailers, and recreational vehicle trailers for hauling ATVs, snowmobiles, personal watercraft, and more. These tow balls are an excellent extension of your class 3 or class 4 trailer hitch and ball mount and are the ideal choice for most pickup trucks and SUVs. (NOTE: Never exceed the lowest weight capacity of any towing component, i.e., the vehicle, hitch, trailer, etc.)This CURT tow ball features a ball capacity of 2,000 lbs. It is able to tow most utility trailers, boat trailers, campers, smaller livestock trailers, and some recreational vehicle haulers. (NOTE: Never exceed the lowest weight capacity of any towing component, i.e., the vehicle, hitch, trailer, etc.) As with any trailer, be sure that your towing equipment is capable of handling the load before hitching up. This trailer ball also features a 3/4" shank diameter, a 2-1/8" shank length, 0" of rise, and a stainless steel finish to protect against corrosion and wear. Like all CURT trailer balls, the 1-7/8" balls are tested for your safety and meet all U.S. VESC specifications.Features: Fits 1-7/8" couplers and accepts up to 2,000 lbs. GTW Stainless steel construction for excellent rust resistance Zinc-plated hex nut and helical lock washer for secure mounting Features fine threads for superior holding strength Tested for safety to meet U.S. VESC V-5 specifications Specifications: Ball Capacity: 2,000 lbs Ball Diameter: 1-7/8 in. Color: Stainless Steel  Finish: Polished stainless Hub Warehouse: D25 Material: Forged steel Shank Diameter: 3/4 in. Shank Length: 2-1/8 in. Shank Rise: 0 in. Torque: 160 ft. lb. Warranty: Limited lifetime warranty (one-year finish, one-year parts) *The mounting platform must be at least 3/8 in. thick, and the hole size must not be more than 1/16 in. larger in diameter than the threaded shank

Read more less

1/2" Hitch Lock with 5/8" Adapter - 1-1/4" or 2" Receiver - Barbell- Stainless SteelMake the tow vehicle and trailer more secure by keeping them locked up tight with a CURT hitch lock. Like a hitch pin and clip, a hitch lock is designed to be inserted into the fastener hole in the side of a receiver tube to hold a ball mount or hitch-mounted accessory in place. While a CURT hitch pin does offer sufficient strength for keeping a ball mount firmly attached, a CURT hitch lock goes one step further.CURT hitch locks allow users to lock the ball mount into the trailer hitch, deterring theft and preventing anyone from detaching a trailer from the ball mount and towing away from the property without permission. This CURT hitch lock features a barbell design with a stainless finish and comes with a 1/2" pin diameter and a 5/8" diameter adapter sleeve. This allows it to be used on either a 1-1/4" or 2" receiver tube size. CURT barbell hitch locks are comprised of a pin with two end caps and a round locking mechanism. This hitch lock is key-operated and activated with a simple 1/4-turn. Also, the deadbolt hitch lock comes with a watertight dust cap to keep out the elements and prevent corrosion. For the ultimate towing security, a hitch lock and coupler lock used together will provide security at both the vehicle-side and trailer-side of the towing setup. For a boat, ATV, or camper, keep the toys more secure with CURT hitch locks.Features: 1/2" diameter pin fits 1-1/4" x 1-1/4" receiver tubes 5/8" adapter sleeve allows mounting in 2" x 2" receiver tubes Stainless steel construction for lasting rust resistance Easy-to-operate, 1/4-turn lock activation A watertight dust cap prevents internal corrosion Includes two keys for added convenience Specifications: Finish: Polished stainless  Hub Warehouse: D25 Material: Stainless steel Part Type: Hitch lock Pin Diameter: 0.5 and 0.625 inches Receiver Tube Size: 1-1/4 or 2 inches  Warranty: Limited lifetime warranty (one-year finish, one-year parts)

Read more less

1/2" Hitch Lock with 5/8" Adapter - 1-1/4" or 2" Receiver - Deadbolt - ChromeMake the tow vehicle and trailer more secure by keeping them locked up tight with a CURT hitch lock. Like a hitch pin and clip, a hitch lock is designed to be inserted into the fastener hole in the side of a receiver tube to hold a ball mount or hitch-mounted accessory in place. While a CURT hitch pin does offer sufficient strength for keeping a ball mount firmly attached, a CURT hitch lock goes one step further.CURT hitch locks allow users to lock the ball mount into the trailer hitch, deterring theft and preventing anyone from detaching a trailer from the ball mount and towing away from the property without permission. This CURT hitch lock features a deadbolt design and comes with a 1/2" pin diameter with a 5/8" diameter adapter sleeve. This allows it to be used on either a 1-1/4" or 2" receiver tube size. CURT deadbolt hitch locks have a solid, square-shaped lock mechanism and a bent handle for easier gripping. This deadbolt hitch lock is key-operated and activated with a simple 1/4-turn. Also, the deadbolt hitch lock comes with a watertight dust cap to keep out the elements and prevent corrosion. For the ultimate in towing security, a hitch lock and coupler lock used together will provide security at both the vehicle-side and trailer-side of the towing setup. For a boat, ATV, or camper, keep the toys more secure with CURT hitch locks.Features: 1/2"-diameter pin fits 1-1/4" x 1-1/4" receiver tubes 5/8" adapter sleeve allows mounting in 2" x 2" receiver tubes Protected by a durable chrome-plated finish Easy-to-operate, 1/4-turn lock activation A watertight dust cap prevents internal corrosion Includes two keys for added convenience Specifications: Finish: Chrome Hub Warehouse: D25 Material: Carbon steel Part Type: Hitch lock Pin Diameter: 0.5 and 0.625 inches Receiver Tube Size: 1-1/4 or 2 inches  Warranty: Limited lifetime warranty (one-year finish, one-year parts)

Read more less

15' Dark Green Cargo Straps with "S" Hooks - 300 lbs - 2 PackWrapping rope around the trailer and hoping for the best is not the ideal way to secure cargo. Even using a net of bungee cords can create an unsafe scenario if just one of those bungees pops loose. Using the right method to secure the cargo is an important aspect of towing that is too often overlooked. When users need cargo security that can handle the long haul, CURT cargo straps should be used. CURT offers two different types of cargo straps in a variety of colors and lengths and with various hook types to provide a complete towing solution.CURT cambuckle tie down cargo straps are a lightweight load-securing option and are especially useful when securing lighter loads and fragile cargo. They offer a direct influence over tension when tightening the strap, making it very difficult to over-tighten the strap and crush cargo. These cam straps are made of a tough, woven nylon material designed to be highly resistant to stretching and abrasion. They have a break strength of 900 lbs. and a work load limit of 300 lbs. They come equipped with rubber-coated S-hooks for a secure hold and strong resistance to corrosion and wear. These dark green cargo straps measure a total length of 15' and have a strap width of 1". Two cambuckle straps are included in this package.Packing up a vehicle for a long trip does not have to turn into a game of Tetris. With CURT cargo management, it is easy to give yourself adequate storage room, even in the smallest cars. For that weekend getaway or trip cross-country, you can bring it all with CURT.Features: Two 15' long straps perfect for securing cargo in trailers, truck beds and more Offers a superior tiedown method compared to bungee cords and rope Provides a work load limit of 300 lbs. with a break strength of 900 lbs. Cambuckle mechanism allows for quick, direct tension on lighter loads Straps constructed from high-strength, woven nylon S-hooks coated in rubber for rust and wear resistance Cambuckles protected by a durable yellow zinc-plated finish Specifications: Break Strength: 900 lb. Capacity: 300 lb. Color: Dark Green Hook Finish: Rubber-coated Hook Style: S-hook Hub Warehouse: D25 Part Type: Cargo strap Quantity Per Package: 2 Strap Length: 15 ft. Strap Width: 1 in. Warranty: Limited lifetime warranty (one-year finish, one-year parts)

Read more less

2" RockerBall Cushion Hitch Trailer Ball - 3500 lbsThe CURT RockerBall™ trailer ball provides improved comfort and enhanced control while towing, featuring our unique ShockDrop™ technology. An integrated cushion isolator allows this hitch ball to turn a standard ball mount into a cushion hitch with anti-rattle capabilities.The RockerBall™ trailer ball dynamically reduces jerking and jarring while towing. As your trailer passes over bumps and potholes, it produces all kinds of vibrations, jolting, chucking, and noise. With a traditional metal-on-metal connection, these annoyances are directly transferred to your tow vehicle, making your ride noisy and uncomfortable and taking a toll on your towing system.The RockerBall™ completely changes your towing experience by absorbing the erratic movement and rattling of your trailer at the coupling point. This provides a smoother ride and increased control over the vehicle and trailer. It also reduces the amount of stress placed on your vehicle, receiver hitch, brakes, and suspension system.The RockerBall™ is also extremely low-maintenance compared to other torsion hitch and cushion hitch options. It has no airbags or bearings to service. Simply apply grease to the integrated zerk fitting as needed for continuous lubrication and smooth operation.The RockerBall™ tow ball retrofits onto a variety of standard ball mounts, virtually any mount with a 2-inch wide trailer ball tongue platform and a 3/4-inch trailer ball hole. The anti-swivel base keeps the hitch ball properly oriented and locked in place when fully torqued.The CURT RockerBall™ hitch ball is constructed from forged steel for exceptional strength. The base is covered in a durable powder coat finish, and the ball itself has a chrome plating for long-lasting weather resistance.Features: Dynamic trailer ball featuring ShockDrop technology Dampens jerking and jarring from bumps and potholes for smoother towing Cushioned isolators reduce rattling and vibration for a more comfortable ride Reduces shock loads to the vehicle during sudden braking or acceleration Minimizes stress on tow vehicle's suspension and brakes for extended longevity Retrofits onto most existing ball mounts to improve current towing experience Virtually maintenance-free with no airbag or bearings to service Grease zerk fittings provide easy lubrication Anti-swivel base fits 2" wide ball mount tongues with 3/4" diameter hole Forged steel construction for dependable towing power Durable carbide black powder coat finish on base and chrome plating on ball Standard trailer ball diameter fits 2" couplers Rated for 3,500 lbs. gross trailer weight Tested for safety to meet SAE J684 specifications Specifications: Patent: # 11,192,408 Ball Capacity: 3,500 lbs Ball Diameter: 2 in. Finish: Chrome Hub Warehouse: D25 Material: Forged steel Shank Diameter: 2 in. Warranty: Limited lifetime warranty (one-year finish, one-year parts) *Ball mount sold separately (not compatible with Rebellion XD ball mount)*The mounting platform must be at least 3/8" thick, and the hole size must not be more than 1/16" larger than the diameter of the threaded shank

Read more less

2" Trailer Ball - 1" x 2-1/8" Shank - 7,500 lbs. - ChromeOut of the monotony comes one name that rises above all others. CURT trailer balls are designed for strength, ease of use, and, ultimately, to get users to the destination without hassle. CURT 2" trailer hitch balls are constructed from quality steel and are made with precision to fit a 2" trailer coupler like a hand in a glove. The hitch ball can tow most standard-duty and heavy-duty trailers, such as utility trailers, boat trailers, campers, livestock trailers, and recreational vehicle trailers for hauling ATVs, snowmobiles, personal watercraft, and more. These hitch balls are an excellent extension of class 3 or class 4 trailer hitch and ball mount and are the ideal choice for most pickup trucks and SUVs. (NOTE: Never exceed the lowest weight capacity of any towing component, i.e., the vehicle, hitch, trailer, etc.) This particular 2" trailer ball offers a ball capacity of 7,500 lbs. It features a 1" shank diameter, a 2-1/8" shank length, 0" of rise, and a nickel-chrome finish to protect against rust and scratches. With its fine-threaded shank, this 2" trailer ball also offers an added measure of holding strength and provides smooth installation and torquing. To give users peace of mind while towing to the next destination, CURT also carefully tests the trailer balls and ensure that each one meets U.S. VESC specifications.Features: Fits 2" couplers and accepts up to 7,500 lbs. GTW Constructed from high-strength, hot-forged steel Protected by a durable chrome-plated finish Zinc-plated hex nut and helical lock washer for secure mounting Features fine threads for superior holding strength Tested for safety to meet U.S. VESC V-5 specifications Specifications: Ball Capacity: 7,500 lbs. Ball Diameter: 2 in. Color: Silver Finish: Chrome-plated Hub Warehouse: D25 Material: Forge steel Part Type: 2 in. Trailer ball Shank Diameter: 1 in. Shank Length: 2-1/8 in. Shank Rise: 0 in. Torque: 250 ft. lb. Warranty: Limited lifetime warranty (one-year finish, one-year parts) *The mounting platform must be at least 3/8 in. thick, and the hole size must not be more than 1/16 in. larger in diameter than the threaded shank

Read more less