Products

Soil Moisture Sensor, Vantage Pro® and Vantage Pro2™Watermark® soil moisture sensor uses electrical resistance to measure the moisture level of the soil. Does not require periodic maintenance during the growing season. Simply bury at the desired depth, then monitor moisture levels throughout the season. Add up to 4 sensors to a single Leaf & Soil Moisture/Temperature Station. Includes 15' (4.6M) cable.Compatible with Vantage Pro and Vantage Pro2. The Soil Moisture Sensor must be connected via a Leaf & Soil Moisture/Temperature Station (#6345). Quick Guide (pdf)

Read more less

Solar Radiation SensorFor use with Vantage Pro and Vantage Pro2. (Already included with Vantage Pro Plus and Vantage Pro2 Plus.)Measures solar radiation and is required (along with an anemometer and a temperature/humidity sensor) if you wish to monitor evapotranspiration.Diffuser element and housing are carefully designed for accurate cosine response. Silicon photo diode provides good match to solar spectrum. Two-piece housing minimizes radiation heating, allows convection cooling of the sensor, and prevents the trapping of water or dust. Includes built-in level and 2' (0.6M) cable.Compatible with both original Vantage Pro and Vantage Pro2.You may also need a UV Sensor (#6490) and Sensor Mounting Shelf (#6673). Quick Guide (pdf)Owner's Manual (pdf)

Read more less

Sonic AnemometerMeasure wind with no moving parts. Use with a Sensor Transmitter or an EnviroMonitor Node, or as a replacement anemometer for wireless and cabled Vantage Pro2.The Davis Sonic Anemometer has no moving parts – it measures wind speed and direction with electro-acoustic transducers that send sonic pulses back and forth. The time it takes for the pulses to travel from one transducer to the other is affected by the movement of air. Speed and direction can then be calculated, with calibration for air temperature. The Sonic Anemometer has its own solar panel that charges an internal battery. It can be used with an EnviroMonitor Node, or as a replacement anemometer for your Davis weather station. It can also be installed in a Sensor Transmitter to create additional wind stations when reporting to WeatherLink Live.Solar-powered with battery backup. Includes mounting hardware, battery, aligning tool, and 40 ft (12 m) cable.Works with Sensor Transmitter (#6332 or 6331) or EnviroMonitor Node (#6810). (When using with an EnviroMonitor Node, use an RJ Connector Node Adapter.) Quick Guide (pdf)Owner's Manual (pdf)

Read more less

Spare Vane Only f/WindTrak 10.Sport Specifications: Type: Wind Indicator Instrument Function: Wind Box Dimensions: 2"H x 5"W x 16"L WT: 0.4 lbs UPC: 011698310104 Quick Guide (pdf)

Read more less

Spare Vane Only f/WindTrak 15 Specifications: Type: Wind Indicator Instrument Function: Wind Box Dimensions: 3"H x 4"W x 16"L WT: 0.2 lbs UPC: 011698315109

Read more less

Stainless Steel Temperature Probe w/Two-Wire TerminationMeasure temperature of air, soil, or water with this multi-purpose temperature probe.Add up to four probes to a single Leaf & Soil Moisture/Temperature Station. Or add to Vantage Connect and use in place of Vantage Connect's internal temperature sensor. Great option for measuring water or soil temperature without adding another station.Probe has a 2-1/2" (64mm)-long stainless steel housing and includes 15' (4.6M) direct-burial cable.Compatible with both original Vantage Pro and Vantage Pro2. Quick Guide (pdf)

Read more less

Stainless Steel Temperature Probe w/RJ ConnectorMeasure temperature of air, soil, or water with this multi-purpose temperature probe.Add up to four probes to a single Leaf & Soil Moisture/Temperature Station. Or add to Vantage Connect and use in place of Vantage Connect's internal temperature sensor. Great option for measuring water or soil temperature without adding another station.Probe has a 2-1/2" (64mm)-long stainless steel housing and includes 15' (4.6M) direct-burial cable.Compatible with Wireless Temperature Station (6372), Weather Envoy (6316), Envoy8X (6318), and Anemometer/Sensor Transmitter Kit (6332). Quick Guide (pdf)Owner's Manual (pdf)

Read more less

Wireless Repeater with Solar PowerFor longer distances or to improve reception in troublesome areas, add one or more Wireless Repeaters. Transmitting and receiving range for each repeater is up to 1000' (300M) outdoors, line of sight; typical range through walls under most conditions is 200' to 400' (60 to 120M). Includes solar panel, regulator circuit, and rechargeable battery.Use up to eight repeaters with a single wireless station, or form a network of weather stations by linking eight repeaters to eight different wireless stations.Compatible with Vantage Pro2 and Vantage Vue only; not compatible with original Vantage Pro. Quick Guide (pdf)Owner's Manual (pdf)

Read more less

Super Quick Fist ClampSuper Quick Fist is ideal for holding fire extinguishers, oxygen cylinders, CO2 tanks, and other equipment. Mounts easily with three #10 (5 mm) bolts or screws (not included). Can be mounted with strap facing any direction.Specifications: Holds objects from 2-1/2 to 7-1/2" in diameter (64 to 191mm) Each clamp supports approximately 50lbs (23 kg) Mounting base measures 7/8 x 6" (22 x 152 mm) Typical uses: Mount a large fire extinguisher with Super Quick Fist Super Quick Fist neatly stores chart holders Super Quick Fist affixes a D-size oxygen cylinder Two Super Quick Fists hold a 7" CO2 tank Quick Guide (pdf)

Read more less

Temperature Probe with RJ ConnectorUsed to measure air, soil, or water temperature. Features an electronic sensor sheathed in black UV-stabilized plastic. Includes 25' (7.6M) cable.Compatible with Weather Envoy, Envoy8X, and Anemometor/Sensor Transmitter Kit. Quick Guide (pdf)Owner's Manual (pdf)

Read more less

Temperature/Humidity Sensor w/Radiation ShieldFeatures both temperature and humidity sensors inside the radiation shield, which protects the sensors from solar radiation and other sources ofradiated and reflected heat. Includes hardware for mounting on a fence post or pole and 25' (7,6M) cable. Quick Guide (pdf)Owner's Manual (pdf)

Read more less

Tiller-TamerMaintains cruising course with no hands, in any weather or wind condition. The tension is smoothly adjustable from fully locked to fully free. Tiller-Tamer gives improved control and feel to the tiller handle. Does not interfere with automatic steering systems. No loss of cockpit space. No need to lash the tiller when boat is moored or trailered. Specifications: Color: Black Box Dimensions: 2"H x 5"W x 9"L WT: 0.3 lbs UPC: 011698220502 Quick Guide (pdf)

Read more less