Products

Whale Tail XLAluminum Stabilizer and Ski Boat FinImproves performance in any I/O or outboard motor!The Whale Tail XL extends out behind the prop to utilize prop wash energy which is normally lost. Whale Tail transforms this energy into lift for immediate response when the throttle is applied. Unique hydrodynamic design Stabilizes bow-light boats Pops skiers up in less time Flattens wake for water skiing; creates positive, skid-free turns: With bow lowered, visibility and safety is improved Smooths out ride in rough water Reduces porpoising & cavitating Increases top speed and fuel savings in most applications Mounts on the anti-cavitation plate of all inboard/outboards and outboards Installs in 15 minutes with stainless steel hardware included Marine grade aluminum with durable anodized finish Use the Whale Tail XL year-round in freshwater or saltwater to improve performance of any boat!

Read more less

WindTrak 10 Sport Wind VaneWith the introduction of the WindTrak 10 Sport, WindTrak wind vanes continue to offer exceptional performance at the best value of any wind indicator worldwide. The secret is in the sapphire jewel suspension bearing, large fin-low inertia van, and easy-to-read, fully adjustable tacking tab system.Reflector tape on the vane and tacking tabs make WindTrak 10 Sport easy to see day and night. WindTrak vanes are sturdy and when installed properly, offer many years of use. They have been wind tunnel tested to wind speeds of 80 knots! WindTrak 10 Sport has a 10" (25 cm) vane. Includes glass reinforced polycarbonate J-Base for side, top or front of mast mounting on most dinghies, smaller boats and sport boats. Stands just 9.25" (23.5 cm) tall and weighs 1.2 ounces (31 g). Specifications: Type: Wind Indicator Instrument Function: Wind Box Dimensions: 2"H x 3"W x 12"L WT: 0.2 lbs UPC: 011698001934

Read more less

WindTrak 15WindTrak wind vanes continue to offer exceptional performance at the best value of any wind indicator worldwide. The secret is in the sapphire jewel suspension bearing, large fin-low inertia vane, and easy-to-read, fully adjustable tacking tab system.WindTrak is the perfect choice for all cruising and racing boats 15' (4.6 meters) and bigger.Reflector tape on the vane and tacking tabs make WindTrak 15 easy to see day and night. WindTrak vanes are sturdy and when installed properly, offer many years of use. They have been wind tunnel tested to wind speeds of 80 knots! WindTrak 15 has a 15" (38 cm) vane. Includes through-bolt or drill and tap mounting socket; 5/16" -18 stainless stud, washers and nut. Stands 12.75" (32 cm) tall and weighs just 3.6 ounces (101 g).A bird-proof spike extends another 10" (24 cm) above the vane to discourage birds from landing. Specifications: Type: Wind Indicator Instrument Function: Wind Box Dimensions: 2"H x 5"W x 16"L WT: 0.5 lbs UPC: 011698315000

Read more less

WindTrak AV Antenna Mount Wind VaneWindTrak wind vanes continue to offer exceptional performance at the best value of any wind indicator worldwide. The secret is in the sapphire jewel suspension bearing, large fin-low inertia vane, and easy-to-read, fully adjustable tacking tab system.WindTrak AV installs onto most whip antennas, including Metz and Shakespeare brands, with a whip diameter less than 1/8" (3 mm). Combine two installations into one to reduce masthead clutter, weight, and windage aloft. Rides on low-friction Teflon® bearings. Complete with 15" (38 cm) vane, reflective tacking arms, hardware and instructions for easy installation. Antenna not included. Specifications: Instrument Function: Wind Type: Wind Indicator Box Dimensions: 3"H x 6"W x 18"L WT: 0.5 lbs UPC: 011698316007

Read more less

WindTrak Light (for 3100/3150)Light up the reflector tabs and vane on your WindTrak for easy viewing at night with WindTrak Light. Waterproof and non-corroding silver parts give long-life at just 120 ma current draw. Fits under WindTrak 15, WindTrak 10 or J-Base™ mounting socket. Specifications: Instrument Function: Wind Box Dimensions: 2"H x 3"W x 4"L WT: 0.1 lbs UPC: 011698320004

Read more less

Wireless Leaf & Soil Moisture/Temperature StationProduct DescriptionSolar-powered station includes transmitter and battery inside weather-resistant shelter.Sensors are sold separately, letting you build the station that matches your needs. To view the data, add a wireless Vantage Pro2 console/receiver (#6312) or Weather Envoy (#6316), and a wireless Vantage Connect (#6620) or WeatherLink. Not compatible with original Vantage Pro stations.* Note: Compatible with Vantage Pro2 US version only; not compatible with original Vantage Pro (Vantage Pro'1'), Vantage Pro2 EU, UK or OV versions. Quick Guide (pdf)Owner's Manual (pdf)

Read more less

Wireless Weather Envoy™Receive data from a wireless Vantage Pro2 integrated sensor suite or wireless Temperature, Temperature/Humidity, or Leaf Wetness & Soil Moisture/Temperature stations, and post it to your computer without a console! When used along with a WeatherLink data logger and software package, Weather Envoy will collect and store data from the outdoor sensors. Both the wireless and cabled versions include an AC-power adapter. Either may also be run using one of our solar power kits.Compatible with Vantage Pro2 only; not compatible with original Vantage Pro. Quick Guide (pdf)Owner's Manual (pdf)

Read more less

14" x 11" Bait Table/Filet BoardThe Next Generation in Rod Holder Accessories - The Interchangeable Deep Blue MultiSystem. The only multiple-use rod holder accessory system available! One MSR Swivel Mount is all you need to hold many different accessories in any rod holder at any angle. Simple to use, no tools are required to change products. Change your bait board to a food tray in seconds or refill your reel quickly and easily. Saves money, saves 50% or more over comparable individual accessories. Don't settle for anything less!Features: 14" x 10" Size Ideal For Bait Includes Rod Holder Mount 100% Marine-Grade Polymer Lifetime Warranty *MSK-6 includes rod holder mount

Read more less

21 x 12" Bait Table/Filet BoardThe Next Generation in Rod Holder Accessories - The Interchangeable Deep Blue MultiSystem. The only multiple-use rod holder accessory system available! One MSR Swivel Mount is all you need to hold many different accessories in any rod holder at any angle. Simple to use, no tools are required to change products. Change your bait board to a food tray in seconds or refill your reel quickly and easily. Saves money, saves 50% or more over comparable individual accessories. Don't settle for anything less! Lifetime warranty.Features: Ideal for cut bait 21" x 12" 100% marine-grade Polymer Construction Folds flat for easy storage Includes MSR swivel mount Swivels 360 degrees Folds flat for storage Lifetime Warranty Kit includes MSR and MS-1

Read more less

Double Cup Holder/Storage BoxNeed a movable storage box? This product will hold cell phones, sunglasses, tackle, fishing gear, etc. The DH-2 is designed to fit one or two insulated drinks and/or storage. Marine-grade polymer construction and suction cup-mounted easy mobility, and a boat-friendly installation. See our complete line of cup holders, we make a version for nearly every occasion. Lifetime warranty.Features: Marine-Grade Polymer Construction No Drilling Required Mounts With Four Suction Cups Size 4.5" x9" Lifetime Warranty

Read more less

Double Drink Holder with Center StorageYou asked for it, we developed it. A suction cup mounted double drink holder with center storage box. Ideal for cell phones, sunglasses, keys, tackle, etc...Features: Suction cup mounting - no drilling Holds 2 drinks in "coozie" insulators Center storage box Size 4.5" x 13" Lifetime Warranty Specifications: Top Seller Lifetime Warranty Marine-grade polymer construction

Read more less

Double Drink Holder with Suction CupsDo you need a drink holder that mounts on a vertical or horizontal surface? This drink holder is designed with that versatility in mind. Constructed of marine-grade polymer this drink holder fits cans and bottles in "Coozie" type insulators, handled mugs, and bottled water of many types and sizes, and will also accommodate most binoculars. Pre-drilled on back and bottom for four 2" suction cups (included) for side or surface mount. It may also be permanently attached.Features: Double Drink/Binocular Holder 100% Marine-Grade polymer Suction cup or screw mount Mount on a vertical or horizontal surface Dimensions 8 1/2 x 4 3/4 x 3 Lifetime warranty

Read more less