Anchor Lift SystemThis convenient system drops the anchor at the turn of a button and stores it in the anchor mount housing when not in use. Constructed of heavy gauge steel with durable powder coated finish and mounts on the bow or stern corners of most boats.nAnchor secures within anchor mount housing. Mounts easily to bow or stern. Deploy anchor with the simple twist of a knob. Includes:
Anchor Mount/Rope Guide Assembly
Anchor Rope Reel Assemblyn
Rear Pulley, Rear Pulley Axeln
Other Features:n
nAnchor deploys and lifts smoothly and securely.
Easy installation with detailed instructions. n
Multiple mounting solutionsn
Anchor stows conveniently in anchor mount housingn
*Anchor, rope, and mounting hardware not included.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Axis Shallow Water Anchor - Black - 8'The shallow water anchor is designed for waters up to 8 feet deep which are ideal for anglers. Easy to install, this anchor is compatible with powerboats under 30 feet and can be conveniently operated by remote control. With no hydraulic pump and hoses to worry about, the shallow water anchor can be installed quickly and takes up less space. Control your boat with confidence with strong holding power in any bottom conditions.Features:
Easy to remove when trailering or not in use
Wake-dampening/mitigating spike
Easy to install
Remote controlled
Powder-coated aluminum finish
Quick Guide (pdf)
Solar Piling Light96-264-F
Ideal for Docks, decks, walkways and driveway or slip entries
Attractive & Functional
Up to 10hr run time
Bright white LED / 360 degree Illumination
Powerful solar charging performance
Installs easily with no wires
Attractive & Rugged broad-based ABS pillar
Fits piling diameters 7" and up
Replaceable, Rechargeable AA batteries
Weatherproof
Leather Mooring Line Chafe Kit - 3/8" & 7/16" Mooring line chafe kits include: Waxed twine, heavy duty needle and (2) 10” pieces of leather pre-stamped for sewing. Used to reduce chafe and extend the life of mooring lines. Natural leather - color may vary. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Wireless Remote for G2 Anchor WinchAllows push-button anchor winch operation from any location. The wireless remote clips into a handy storage bracket that can be mounted on your helm or anywhere you wish. You have the option of using the remote anywhere in the boat, or using it like a dash-mounted switch.Compatible With: TRAC G2 Fisherman 25 (T10108-G2) and G2 Pontoon 35 (T10109-G2)Features:
Allows push-button anchor winch operation from any location
Wireless remote clips into a handy storage bracket
*Sold as an Individual WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Wired Second Switch for G3 Anchor WinchAdd a convenient second anchor winch switch. Includes everything you need to install an auxiliary switch in the location of your choice.Compatible With: TRAC G3 Fisherman 25 (69002/T10108-G3) and Pontoon 35 (69003/T10109-G3)Technical Specifications:24' Cable In the Box:
Sealed switch
Cable
Mounting hardware
*Sold as an Individual WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Motor 12V 1000W1000 Watt 12 Volt Series Wound Replacement Windlass MotorFeatures:
1000 Watt 12 Volt Replacement Windlass Motor
Designed for Maxwell 800 / 1000 windlasses
4 hole flange motor replaces the 1000 Watt 12 volt P11112 2 hole flange motor
Maxwell has made a change to the mounting flange of CIMA series-wound motors
The change consists of adding a second set of mounting holes which allows the motor to be mounted 90? from the original orientation
Replaces Maxwell P11112
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
MAXWELL AA710WIRELESS, HAND HELD REMOTE WINDLASS CONTROLLER AND RODE COUNTERAll the features of the AA560 plus options to control a bow thruster or deck lights and anchor wash.
High level wireless transmission security - 2.4GHz ISM band
Hand held controller displays rode count plus signal strength and battery level
Console requires two AA batteries
Ergonomic shape with wrist strap connector
Water resistant to IP65
Rubber moulding for grip and non slip protection
Console holder and protective cover
Shockproof
IEEE 802.15.4 compliant
Kit includes 1 hand held remote control and 1 base station, 1 sensor and 1 magnet.Note: Two base stations can be combined and controlled by one remote to allow control of two windlasses. Plus, Plug and Play connectors, T-junctions and Gender Adaptors are also available. Contact your Maxwell Dealer. Quick Guide (pdf)Brochure (pdf)
The RC6 utilizes 6mm/7mm (1/4") chain spliced to 12mm (1/2") three strand or 8-plait rope.
Maximum Pull: 660lbs.
Providing most of the features of the larger RC8, the RC6 has been designed with the smaller, trailer boat market in mind.
The in-line, vertical gearbox and motor means quick and easy installation by either the boat yard or the DIY aftermarket customer.
An inexpensive, high performance and great looking windlass: the RC6 is built for durability and years of trouble free use.
The RC6 is available only as a low profile unit (no optional capstan drum).Kits include:windlass , an on/off breaker panel, a reversing soleniod, an up/down panel switch and a handle.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications:
Chain - Diameter (Inches): 1/4"
Rope Diameter (Inches): 1/2"
Vertical/Horizontal: Vertical
Box Dimensions: 10"H x 15"W x 15"L WT: 25 lbs
UPC: 1000000004816
Brochure (pdf)
Rode CounterAuto Anchor 150 - panel mount rode counter for electric or hydraulic windlasses using all-chain or rope/chain rode.
Rode length monitoring from the helm.
Large LCD display with adjustable red back lighting shows length of anchor rode deployed.
Display in feet or metres.
Docking alarm warns skipper when anchor is close to docking.
Easy set up with pre-programmed calibrations for rope/chain ropes.
Install one or more units or combine with the AA550RC, AA500C or AA601 for multiple stations.
Works on 12 or 24V DC.
Standard 60mm (2.36) marine instrument console.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)Brochure (pdf)