Anchoring & Docking - Docking Accessories

Solar Piling Light96-264-F Ideal for Docks, decks, walkways and driveway or slip entries Attractive & Functional Up to 10hr run time Bright white LED / 360 degree Illumination Powerful solar charging performance Installs easily with no wires Attractive & Rugged broad-based ABS pillar Fits piling diameters 7" and up Replaceable, Rechargeable AA batteries Weatherproof

Read more less

Leather Mooring Line Chafe Kit - 3/8" & 7/16" Mooring line chafe kits include: Waxed twine, heavy duty needle and (2) 10” pieces of leather pre-stamped for sewing. Used to reduce chafe and extend the life of mooring lines. Natural leather - color may vary. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Dock Edge Postlite Solar LED Post Light 2PK Powerful solar charging performance 6 possible colors to choose from Change colors with a flip of a switch Easy twist-on lid with large rubber seal 360 Degree lenticular light diffusing lens and domed reflector maximize light output Installs easily with no wires Universal fittings for 1-5/8", 1-7/8", 2-3/8", Brock Post and 3-1/4" ID posts, universal flat surfaces Product Specifications: Part No.: 96-258-F Description: PostLite, Solar, LED White, (2pk) Owner's Manual (pdf)

Read more less

3-Section Adjustable Boat Hook - Adjusts 38" to 8'Adjusts from 38" to 8' (100 to 240cm) 3 sections: 1", 1-1/8", and 1-1/4" (25, 29, and 32mm) tube dia.The Most Dependable Twist Lock and Strongest Boat Hook EndA tough boat hook is a valuable asset when launching, docking, mooring or retrieving your favorite hat. The threaded end accepts a deck brush, mop, squeegee and other accessories. A highly visible, soft vinyl orange tip covers the threads and protects the boat's finish when fending off. All Team boat hooks float. The hook of unbreakable Lexan® is lighter than (brittle) metal alloy ends. Durability GUARANTEED to last a lifetime. Don't settle for less!Features: Extra Thick Neck and Body for added durability Ribbed Hook and unbreakable Lexan® tougher by design Curved Head for fending off stanchions and lines 3/4" (19mm) Acme Thread accepts brushes, mops, etc Hole Molded in Tip for securing hook or attaching small line for use with tarps or awnings Brochure (pdf)

Read more less

Leather Mooring Line Chafe Kit - 1/2" Mooring line chafe kits include: Waxed twine, heavy duty needle and (2) 10” pieces of leather pre-stamped for sewing. Used to reduce chafe and extend the life of mooring lines. Natural leather - color may vary. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Line Mate JuniorLine Mate Jr. is designed to hold your mooring lines. This unique product is also ideal for keeping dockside power lines from hanging in the water-or for water hoses so they are out of the way, so no one can trip on them. A handy aid in docking on windy days, when docking can be a problem. Use your boat hook to grab onto the Line Mate Jr. and pull boat toward dock. The Line Mate Jr. is a heavy-duty casting made of Almag 35. A composition of Aluminum for corrosion resistance and Magnesium for strength.

Read more less

EZ Board Boarding Handle - 48"Removable boat boarding assist handle. Converts standard fishing rod holder for use as a boarding assist handle.Installation is EZ. Simply insert the handle into the rod holder until the locating pin engages, then rotate to lock.Features: Assist in maintaining balance while boarding Slides easily into and out of most flush mounted rod holders No special tools needed Made from high impact corrosion and UV resistant PVC Five (5) Year Replacement Warranty Made in the USA Installation and Removal Instructions: Installation: Slide the EZ Board handle into the rod holder until the locating pin engages the EZ Board slots. Rotate the handle to the right or left to lock in place. Both ends of the EZ Board handle are slotted for ease and convenience. Simply adjust the orientation of the handle to achieve the optimal position for boarding and balance Removal: Rotate the handle until the rod holder pin aligns with the EZ Board slot, then pull out to remove Do not force the EZ Board handle to install or remove NOTE:Please be advised that it is up to the customer to drill the holes so that they can orient the handle how they would like to. The handle can be placed in the position they would like to use it, whether it is from boarding from the dock or the swim ladder. Quick Guide (pdf)Brochure (pdf)

Read more less

EZ Board Boarding Handle - 36"Removable boat boarding assist handle. Converts standard fishing rod holder for use as a boarding assist handle.Installation is EZ. Simply insert the handle into the rod holder until the locating pin engages, then rotate to lock.Features: Assist in maintaining balance while boarding Slides easily into and out of most flush mounted rod holders No special tools needed Made from high impact corrosion and UV resistant PVC Five (5) Year Replacement Warranty Made in the USA Installation and Removal Instructions: Installation: Slide the EZ Board handle into the rod holder until the locating pin engages the EZ Board slots. Rotate the handle to the right or left to lock in place. Both ends of the EZ Board handle are slotted for ease and convenience. Simply adjust the orientation of the handle to achieve the optimal position for boarding and balance. Removal: Rotate the handle until the rod holder pin aligns with the EZ Board slot, then pull out to remove. Do not force the EZ Board handle to install or remove. NOTE:Please be advised that it is up to the customer to drill the holes so that they can orient the handle how they would like to. The handle can be placed in the position they would like to use it, whether it is from boarding from the dock or the swim ladder. Quick Guide (pdf)Brochure (pdf)

Read more less

Mooring Snubber Kit with 3/8" x 20' Dock LineThis flexible snubber stretches to absorb shock and protect boats, cleats, and lines from the strain of wind and water. The resilience of the snubber can be adjusted to conditions by increasing or decreasing the amount of line wrapped around it. Includes snubber and 20 ft. of solid braided multifilament polypropylene dock line.Specifications: Thickness (inch): 3/8" Length (feet): 20' Color: Blue Specifications: Color: Blue Length (Feet): 20.0 Rope Diameter (Inches): 0.375 Box Dimensions: 3"H x 6"W x 10"L WT: 1.05 lbs UPC: 022697117304 Quick Guide (pdf)

Read more less

Panoramic Solar Dock LightFeatures: Perfect for docks and decks Automatic on-at-dusk Weatherproof, durable Works 8 hours on a full charge Replaceable, rechargeable battery 4-5 lumens (emitted light)

Read more less

Mantis Underwater Dock Lighting System - RGBW Full-ColorThe technology, reliability, value, and performance of the world’s best selling underwater light in an easy-to-install all-inclusive dock lighting package. The Mantis dock lighting system includes everything needed to transform your dock or seawall into a dazzling nighttime seascape. And with Mantis’ innovative Zip-Mount™ universal mounting system, underwater installation is a snap – even on barnacle-encrusted pilings!Mantis Dock Lights are constructed with marine grade bronze housings and heat tempered glass to withstand the hashes of coastal environments. Each light is equipped with 25' of submersible heavy duty cable and therefore requires no complex conduit installation.The Manits Dock Lighting System incorporates an innovative Zip-Mount™ universal mounting system which allows for the lights to be installed in a snap, even on barnacle-encrusted pilings. No specialized tools or certification is required to install the Mantis Dock Lighting System.Features: Complete kit includes everything needed for easy installation on most pilings or seawalls Leverages the technology and experience of the world’s best-selling underwater lights Plugs into any standard switched outlet Mount 6 inches below typical low tide mark  (can operate above water without damage) Innovative Zip Mount™ universal mounting system Add-on light option available (4 lights per power converter) 2000 lumens output per light, 6000 lumens output per kit Mantis Dock Lighting System is currently only available in Full-Color RGBW Spectrum output Everything you need to install Mantis is included within the kit for simple plug and play installation. A basic 3 light kit can be installed straight from the box in as little as 90 minutes. And if that is not easy enough, Mantis will plug in to any standard switched outlet.What is included in the kit?  3 Full-Color RGBW Dock Lights with integrated 25’ cable  Innovative Zip-Mount™ universal light mounting system  AC to DC Power Converter in weatherproof enclosure  All Required Mounting Hardware  UL Listed* – 3 year warranty WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: Full Color RGBW Material: Bronze Watts: 25W Voltage - Input Range (Volts): 10-30V Box Dimensions: 13"H x 13"W x 13"L WT: 18 lbs UPC: 089300015259 Quick Guide (pdf)

Read more less

Dock Saver Dock Tie-DownThe Dock Strap Tie-Down is simple, quick and easy. Simply place the loops over the dock and boat cleats, quickly tighten the slack with the thumb lever cam buckle and you are done. No knots, no tangled ropes. Adjustable from 2' to 10'.

Read more less