Anchoring & Docking - Fenders

HTM-3 Fender 10.5" x 27" - GraphiteIn keeping with the Polyform tradition of quality, the HTM (hole-through-middle) boat fender was designed to provide maximum protection in a wide variety of applications.  Vertical ribs for extra protection, reinforced tube ends to prevent lines from pulling through if the fender gets caught in a tight spot, and extra wall thickness to resist punctures and tears are just a few of the features of this high-quality fender has to offer. The HTM Series fender is designed to provide protection and stand-off for larger vessels between 20 to 50 feet in length. Features: Even wall thickness for maximum strength and durability Molded-in ribs for strength and abrasion resistance Reinforced tube ends Designed for medium-duty use in both permanent protected and unprotected moorings Unique Polyform valve for years of service One (1) piece design Technical Specifications: Size (diameter x length) - 10.5" x 27" (26.7 x 68.6cm) Tube Diameter - 0.625" (1.6cm) Circumference -  33" (83.8cm) Volume -  9.2 gallons (34.8L) Boat Size - 30' - 40' (9.1 - 12.2M) Weight - 7.7lb *Sold as an Individual Specifications: Color: Graphite Height: 27" Width: 10.5" Box Dimensions: 8"H x 8"W x 25"L WT: 7 lbs UPC: 743952032032 Brochure (pdf)

Read more less

G-4 Twin Eye Fender 6.5" x 22" - GraphitePolyform’s G Series boat fender has raised the bar for quality and appearance in utility fenders.  Subscribing to the philosophy that quality does not have to cost more, we include ribs for extra strength, inflation valves for larger sizes, and reinforced rope holds for long-term durability. The G Series fender is designed to provide protection and stand-off for vessels between 10 to 40 feet in length.Features: Even wall thickness for maximum strength and durability Molded-in ribs for strength and abrasion resistance Reinforced ropeholds Designed for use by trailered boats and in permanent protected moorings Hangs vertically or horizontally  Unique Polyform valve for years of service Technical Specifications: Size (diameter x length) - 6.5" x 22" (16.5 x 55.9 cm) Eye Diameter - 0.75" (1.9 cm) Circumference - 20.4" (51.9 cm) Volume - 2.2 gallons (8.3 L) Boat Size - 20' - 25' (6.1 - 7.6 M) Weight - 2.6 lb *Sold as an Individual Specifications: Color: Graphite Height: 22" Width: 6.5" Box Dimensions: 4"H x 4"W x 20"L WT: 4 lbs UPC: 743952031981 Brochure (pdf)

Read more less

F-11 Twin Eye Fender 21.2" x 57.5" - BlackPolyform has been producing the F Series fender for over 50 years and there is no comparison when it comes to quality, range of sizes, and protection offered.  The F Series fender has offered protection to the world's finest yachts and fishing vessels.  Why?  Because the owners and captains of these prestigious boats know that they can rely on Polyform’s F Series fenders to offer the size, strength, and dependability to protect their vessels from the rigors of the sea and weather. If you want the ultimate protection for your boat, Polyform F Series fenders are the only choice! Classic European twin-eye style boat fenders for the most discerning eye.Features: Even wall thickness for maximum strength and durability Molded-in ribs for strength and abrasion resistance Reinforced ropeholds Designed for use by trailered boats and in permanent protected moorings Twin-eye design for vertical or horizontal use Unique Polyform valve for years of service One (1) piece design Technical Specifications: Size (diameter x length) - 21.2" x 57.5" (53.8 x 146.1cm) Eye Diameter - 1.1" (2.8cm) Circumference - 66.6" (169.2cm) Volume - 63.7 gallons (241.1L) Boat Size - 60' and greater (18.3M and greater) Weight - 25.5lbs *Sold as an Individual Specifications: Color: Black Height: 57.5" Width: 21.2" Box Dimensions: 9"H x 17"W x 30"L WT: 24.9 lbs UPC: 743952004657 Brochure (pdf)

Read more less

G-1 Twin Eye Fender 3.5" x 12.8" - WhitePolyform’s G Series boat fender has raised the bar for quality and appearance in utility fenders.  Subscribing to the philosophy that quality does not have to cost more, we include ribs for extra strength, inflation valves for larger sizes and reinforced ropeholds for long-term durability. Utility boat fenders with Polyform dependability.Features: Even wall thickness for maximum strength and durability Molded-in ribs for strength and abrasion resistance Reinforced ropeholds Designed for use by trailered boats and in permanent protected moorings Twin-eye design for vertical or horizontal use Unique Polyform valve for years of service One (1) piece design Technical Specifications: Size (diameter x length) - 3.5" x 12.8" (8.9 x 32.5cm) Eye Diameter - .375" (1cm) Circumference - 11" (27.9cm) Volume - .4 gallons (1.5L) Boat Size - Up to 10' (up to 3M) Weight - .8lbs *Sold as an Individual Specifications: Color: White Height: 12.8" Width: 3.5" Box Dimensions: 3"H x 3"W x 13"L WT: 0.75 lbs UPC: 743952003056 Brochure (pdf)

Read more less

G-5 Twin Eye Fender 8.8" x 26.8" - GraphitePolyform’s G Series boat fender has raised the bar for quality and appearance in utility fenders.  Subscribing to the philosophy that quality does not have to cost more, we include ribs for extra strength, inflation valves for larger sizes, and reinforced rope holds for long-term durability. The G Series fender is designed to provide protection and stand-off for vessels between 10 to 40 feet in length.Features: Even wall thickness for maximum strength and durability Molded-in ribs for strength and abrasion resistance Reinforced ropeholds Designed for use by trailered boats and in permanent protected moorings Hangs vertically or horizontally  Unique Polyform valve for years of service Technical Specifications: Size (diameter x length) - 8.8" x 26.8" (22.4 x 68.1 cm) Eye Diameter - 0.75" (1.9 cm) Circumference - 27.7" (70.2 cm) Volume - 5.1 gallons (19.3 L) Boat Size - 25'- 35' (7.6 - 10.7 M) Weight - 4.4 lb *Sold as an Individual Specifications: Color: Graphite Height: 26.8" Width: 8.8" Box Dimensions: 8"H x 8"W x 22"L WT: 5 lbs UPC: 743952031998 Brochure (pdf)

Read more less

10' Inflatable Boat Bumper - BlackThe Seipel Marine Boat Bumper line works great to protect your boat from scratches dents and dings during boat tie-ups & lake parties. It also will protect you when pulling up to or mooring at the dock. Bumpers can be hung off the side of the boat or the side of the dock. You can leave the bumpers hanging all day so you don't have to worry whether you stopped to grab some lunch or just to pick up more friends & grab more gear to keep on wakeboarding or wake surfing!IMPORTANT – FatSac Bumpers are to be used for boat tie-ups and docks ONLY. They are NOT meant to be used for towing, to stop a boat at high speeds, or as a flotation device!Features: Highest-quality welded materials Material is similar to river raft inflatable boat UV resistant Includes 1 tie-down cleat per side. Includes 2 x 5’ rope lines to tie up the bumper Uses a Halkey Roberts inflation valve for filling and emptying All seams are double welded with seam tape for added protection and quality *Bumpers can be filled with any air pump, however we recommend FatSac Air Pumps as they work best M3150*

Read more less

Specialty Inflatable Fender - 18" x 36" - BlackInflatable Fender 18" diameter x 36" long cylinder.Features: Made from Black 41oz Industrial Grade Material Special tie-down points RF welded (NOT glued) Custom-formed D-Rings SS 18” diameter x 36” long All made in the USA Crafted in Milwaukee All seams have extra welded PVC strips Great for Big Boats, Sail Boats, Yachts, or any boat you want to keep safe All welded seams no gluing Extra seam tape on the welds for added strength Fills with M3100 air pump or any tube pump Easy to deflate and roll up for Maximum storage Direct UV-printed logos *IMPORTANT: Not to be used for towing or to stop a boat a high speeds or as a flotation device! Specifications: Color: Black Height: 18" Width: 36" Box Dimensions: 7"H x 13"W x 17"L WT: 7.6 lbs UPC: 817177024599

Read more less

Specialty Inflatable Fender - 12" x 30" - BlackInflatable Fender 12" diameter x 30" long cylinder.Features: Made from Black 41oz Industrial Grade Material Special tie-down points RF welded (NOT glued) Custom-formed D-Rings SS 12” diameter x 30” long All made in the USA Crafted in Milwaukee All seams have extra welded PVC strips Great for Big Boats, Sail Boats, Yachts, or any boat you want to keep safe All welded seams no gluing Extra seam tape on the welds for added strength Fills with M3100 air pump or any tube pump Easy to deflate and roll up for Maximum storage Direct UV-printed logos *IMPORTANT: Not to be used for towing or to stop a boat a high speeds or as a flotation device! Specifications: Color: Black Height: 12" Width: 30" Box Dimensions: 7"H x 13"W x 17"L WT: 5.3 lbs UPC: 817177024582

Read more less

5' Inflatable Boat Bumper - GreyThe Seipel Marine Boat Bumper line works great to protect your boat from scratches dents and dings during boat tie-ups & lake parties. It also will protect you when pulling up to or mooring at the dock. Bumpers can be hung off the side of the boat or the side of the dock. You can leave the bumpers hanging all day so you don't have to worry whether you stopped to grab some lunch or just to pick up more friends & grab more gear to keep on wakeboarding or wake surfing!IMPORTANT – FatSac Bumpers are to be used for boat tie-ups and docks ONLY. They are NOT meant to be used for towing, to stop a boat at high speeds, or as a flotation device!Features: Highest-quality welded materials Material is similar to river raft inflatable boat UV resistant Includes 1 tie-down cleat per side. Includes 2 x 5’ rope lines to tie up the bumper Uses a Halkey Roberts inflation valve for filling and emptying All seams are double welded with seam tape for added protection and quality *Bumpers can be filled with any air pump, however we recommend FatSac Air Pumps as they work best M3150*

Read more less

5' Inflatable Boat Bumper - BlackThe Seipel Marine Boat Bumper line works great to protect your boat from scratches dents and dings during boat tie-ups & lake parties. It also will protect you when pulling up to or mooring at the dock. Bumpers can be hung off the side of the boat or the side of the dock. You can leave the bumpers hanging all day so you don't have to worry whether you stopped to grab some lunch or just to pick up more friends & grab more gear to keep on wakeboarding or wake surfing!IMPORTANT – FatSac Bumpers are to be used for boat tie-ups and docks ONLY. They are NOT meant to be used for towing, to stop a boat at high speeds, or as a flotation device!Features: Highest-quality welded materials Material is similar to river raft inflatable boat UV resistant Includes 1 tie-down cleat per side. Includes 2 x 5’ rope lines to tie up the bumper Uses a Halkey Roberts inflation valve for filling and emptying All seams are double welded with seam tape for added protection and quality *Bumpers can be filled with any air pump, however we recommend FatSac Air Pumps as they work best M3150*

Read more less

15' Inflatable Boat Bumper - GreyThe Seipel Marine Boat Bumper line works great to protect your boat from scratches dents and dings during boat tie-ups & lake parties. It also will protect you when pulling up to or mooring at the dock. Bumpers can be hung off the side of the boat or the side of the dock. You can leave the bumpers hanging all day so you don't have to worry whether you stopped to grab some lunch or just to pick up more friends & grab more gear to keep on wakeboarding or wake surfing!IMPORTANT – FatSac Bumpers are to be used for boat tie-ups and docks ONLY. They are NOT meant to be used for towing, to stop a boat at high speeds, or as a flotation device!Features: Highest-quality welded materials Material is similar to river raft inflatable boat UV resistant Includes 1 tie-down cleat per side. Includes 2 x 5’ rope lines to tie up the bumper Uses a Halkey Roberts inflation valve for filling and emptying All seams are double welded with seam tape for added protection and quality *Bumpers can be filled with any air pump, however we recommend FatSac Air Pumps as they work best M3150*

Read more less

Eva Corner Dock FenderAdding to Seipel Marine accessories we have launched a new permanent EVA CORNER dock fender in black. It gets mounted to the corner of your dock for easy mooring of your boat to prevent dings and scratches. Because of the EVA material, it has zero transfer onto the boat’s gel coat.Features: Black EVA molded closed-cell foam material Dimensions: L11.75” x W11.75” x H7.75” May differ slightly, this is a molded foam The only EVA permanent Corner dock fender on the market UV resistant High-density material will last long term Use the Fenders on all the corners of your dock Has 6 special proprietary molded grommets to screw to the dock Includes 6 x SS wood screws #14 x 2-1/4 If used on concrete, anchors must be purchased separately

Read more less