Anchoring & Docking - Windlass Accessories

Pro-Series Bearings Kit - 2nd GenerationBearing kit for Generation 2 Pro-Series and Pro-Fish series windlasses.Compatible With:Lewmar Pro-Series and Pro-Fish windlasses - Generation 2In the Box: Roller clutch x  one (1) External circlip x one (1) Roller bearings (varied sizes) x five (5) *Sold as an Individual 

Read more less

Pro Series Seals, Dowels & Screws Kit Seals, Dowels, and Screws Kit for Generation 1 and 2 Pro-Series/Fish Series windlasses.Compatible With:Lewmar windlasses - Generation 1 and 2In the Box: Dowel 1/4" x 1 1/4" x three (3) Dowel, 6 x 30 mm x one (1) Dowel, 8 x 45 mm x one (1)  Socket HD cap screw 10-24UNC x 1 1/4" x six (6) Wiper seal x two (2) *Sold as an Individual 

Read more less

MAXWELL AA710WIRELESS, HAND HELD REMOTE WINDLASS CONTROLLER AND RODE COUNTERAll the features of the AA560 plus options to control a bow thruster or deck lights and anchor wash. High level wireless transmission security - 2.4GHz ISM band Hand held controller displays rode count plus signal strength and battery level Console requires two AA batteries Ergonomic shape with wrist strap connector Water resistant to IP65 Rubber moulding for grip and non slip protection Console holder and protective cover Shockproof IEEE 802.15.4 compliant Kit includes 1 hand held remote control and 1 base station, 1 sensor and 1 magnet.Note: Two base stations can be combined and controlled by one remote to allow control of two windlasses. Plus, Plug and Play connectors, T-junctions and Gender Adaptors are also available. Contact your Maxwell Dealer. Quick Guide (pdf)Brochure (pdf)

Read more less

Stainless Steel Chain Stopper - 5/16" - 3/8"Chain Stoppers help prevent damage to the windlass and reduce the risk of accidental free fall of the anchor while under way. Chain Stoppers mount alone or inside most bow rollers and work with your anchor roller to take tension off your windlass. Chain and rope should be secured at anchor when your windlass is not in use to avoid high loads the windlass was not designed for. 321820 fits chain sizes 3/16" - 1/4". 321825 fits chain sizes 5/16" - 3/8". Constructed of corrosion resistant formed 304 stainless steel.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Freedom Shaft Service KitMaxwell shaft service kit for Maxwell Freedom series windlasses.

Read more less

Replacement Stripper Arm for RC10 & HRC10Maxwell replacement stripper arm specifically for RC10 and HRC10.

Read more less

HRC1004L 4-Button Remote with LED LightThe main innovation of the multipurpose HRC hand-held remote control is the built-in LED lamp, which facilitates operation in the dark. This is the only hand-held remote in the nautical sector with this exclusive feature.HRC multipurpose hand-held remote controls are designed for the remote operation of various on-board electrically operated equipment such as cranes, gangways, windlasses, sea ladders, etc. HRC is constructed with rubber inserts to ensure high strength, long durability, perfect watertightness, and a secure grip.HRC Remote Controls Are Supplied Complete With: A connecting cable is extensible up to 4.2 m. A watertight deck plug and socket A support bracket for stowing after use Built-in LED lamp HRC units are maintenance-free This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

HRC1004 4 Button Remote ControlHRC Quick Handheld is a multipurpose remote with 4 buttons. This remote is constructed with rubber inserts to ensure high strength, long durability, perfect watertightness, and a secure grip. HRC remote controls are supplied complete with a connecting cable extensible up to 4.2 meters, a watertight deck plug and socket, and a support bracket for stowing after use.ApplicationsDesigned for the remote operation of various on-board electrically operated equipment such as cranes, gangways, windlasses, sea ladders, etc.Features: Watertight 4 buttons This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Lewmar Deck Foot Switch - Windlass Down - Grey PlasticLewmar Deck Foot Switches are single-direction switches and come ready to install.  With a hinged cover to prevent accidental operation, they are suitable for DC electric windlasses running on 12 or 24 volts and must be used with a contactor or control box. Technical Specifications: Switch Direction - Down Material - Composite plastic Power - 12/24V Color - Grey *Sold as an Individual

Read more less

Motor Cima - 1200W - 12V - 4-Hole Flange 12V 1200W DC 3500RPM IP66 Diameter: 114 x 181mm This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Generation 3 Pro-Series Compound Gear Kit Compound gear assembly for generation 2 Pro-Series, Pro-Fish and 700/1000 series windlasses.Compatible With:Generation 3 Pro-Series, Pro-Fish and 700/1000 series windlasses*Sold as an Individual

Read more less

Foot SwitchStamped 304 Stainless Steel/Rubber Cover.This Foot Switch is normally off and momentarily on when depressed by foot. Ideal for use with windlasses. Constructed of corrosion resistant stamped 304 stainless steel and rubber. Installs with ten #8 RH fasteners (not included). WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less