Anchoring & Docking - Windlasses

DeckHand™ 25#1810125The DeckHand 25 has a 25-lb anchor capacity (anchor not included). Includes davit for stowing most styles of anchors. Pre-spooled with 60 feet of 800-lb test nylon rope. Runs on 12-volt battery (not included). Get precision boat placement and the ability to stay on the fish as long as you want with a DeckHand™ electric anchor winch. It automatically raises or lowers your anchor at the touch of a button, and its special anti-drag system senses the bottom to allow for controlled drifting.Features 25-lb anchor capacity (anchor not included) Pre-spooled with 60 feet of 800-lb test nylon rope Davit can be mounted at base of DeckHand or in remote position on deck Davit stows most kinds of anchors Stow and deploy switch integrated into the base of the unit Auto-drift feature automatically stops the motor when the anchor touches bottom (or hits an obstacle); when slack in teh rope becomes tight, rope is automatically released; lock the winch with the touch of a button Consistent hold pattern with older DeckHand models (DH-18, DH-20, DH-35) Includes: remote mountable anchor davit WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Rope Diameter (Inches): 3/16" Vertical/Horizontal: Horizontal Freefall: No Box Dimensions: 9"H x 11"W x 15"L WT: 12.8 lbs UPC: 029402027897 Owner's Manual (pdf)

Read more less

RC10-10 Capstan Windlass 12V - 3/8" Chain & 5/8" RopeThe combined stainless steel and chromed bronze RC10 fully automatic windlass series is designed to effortlessly retrieve and deploy 8mm (5/16") and 10mm (3/8") short link chain and 14mm and 16mm (5/8") three strand or 8-brait (plait) rope.A sleek, Low Profile version and a fluted stainless steel capstan drum version, are available.Simple two piece installation saves time and money and allows easy retrofitting without disassembly of the windlass. Unique spacer tube design allows installation through virtually any deck thickness and the multiple mounting positions and self aligning gearbox ensure optimal location of gearbox and motor in virtually all installation situations.Full disassembly capability of the topworks utilising only the handle provided and an Allen key.The RC10 is manufactured from marine-grade 316 stainless steel and chromed bronze for long term durability. The heavy duty stainless steel pressure arm, coupled with the unique rope/chain gypsy, is designed to effectively grasp the splice between rope and chain, giving the RC10 an unparalleled level of performance.In combination with a heavy duty, large wire diameter, stainless steel pre-loaded spring, the pressure arm pivots on a trouble free bearing, thereby exerting maximum control pressure on the rode and splice.The RC10 works just as effectively with all chain rodes for those who desire a Low Profile, elegantly styled windlass on their foredeck. Huge, through deck hawse pipe throat ensures easy entry of the rope/chain rode into and out of the anchor locker.Cone type clutch/brake mechanism permits manual, Free Fall anchoring. Sealed oil bath and marine-grade hard anodized, alloy gearbox provides maximum output via a precision worm and worm wheel.Features: Huge, through deck hawse pipe throat ensures easy entry of the rope/chain rode into and out of the anchor locker. Cone type clutch/brake mechanism permits manual, Free Fall anchoring. Sealed oil bath and marine-grade hard anodised, alloy gearbox provides maximum output via a precision worm and worm wheel. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Chain - Diameter (Inches): 3/8" Freefall: Yes Rope Diameter (Inches): 5/8" Vertical/Horizontal: Vertical Box Dimensions: 12"H x 17"W x 20"L WT: 50.3 lbs UPC: 9414761058810

Read more less

The RC6 utilizes 6mm/7mm (1/4") chain spliced to 12mm (1/2") three strand or 8-plait rope. Maximum Pull: 660lbs. Providing most of the features of the larger RC8, the RC6 has been designed with the smaller, trailer boat market in mind. The in-line, vertical gearbox and motor means quick and easy installation by either the boat yard or the DIY aftermarket customer. An inexpensive, high performance and great looking windlass: the RC6 is built for durability and years of trouble free use. The RC6 is available only as a low profile unit (no optional capstan drum).Kits include:windlass , an on/off breaker panel, a reversing soleniod, an up/down panel switch and a handle.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Chain - Diameter (Inches): 1/4" Rope Diameter (Inches): 1/2" Vertical/Horizontal: Vertical Box Dimensions: 10"H x 15"W x 15"L WT: 25 lbs UPC: 1000000004816 Brochure (pdf)

Read more less

Pro-Series Horizontal 1000H Windlass Kit - 12VPraised by professionals worldwide, the horizontal Pro-Series is a shining example of Lewmar's commitment to providing quality products for boats.  It's DIY-ready, easy to install, and housed in 100% 316 stainless steel, making it well protected and durable and with push-button control and a built-in manual emergency recovery system. Anchoring has never been easier.Features: Powerful motor providing fast line speed Manual emergency recovery equipped  Convenient above-deck installation Technical Specifications: Material - Stainless Steel Maximum Pull - 1,000lbs Maximum Line Speed - 88'/min Maximum Chain Size - 5/16" Maximum Rope Size - 5/8" Power - 12 V Maximum Boat Length - 38' Mounting Position - Horizontal In the Box: Windlass Switch Circuit breaker Dual direction contactor/solenoid Instruction manual *Sold as an Individual  Specifications: Chain - Diameter (Inches): .45 Freefall: Yes Rope Diameter (Inches): .65 Vertical/Horizontal: Horizontal Box Dimensions: 10"H x 10"W x 18"L WT: 20 lbs UPC: 743683319891 Owner's Manual (pdf)

Read more less

V1 Fast Fit Motor Gearbox Assembly - 12 VReplacement motor/gearbox assembly for V1 - 12 V windlasses.Compatible With: V1 windlasses*Sold as an Individual 

Read more less

HRC 10-8 Horizontal Windlass 5/16" Chain, 5/8" Rope, 12V, with CapstanDesigned for boats up to 45 feet, the HRC10-8 Horizontal Series windlasses proudly follow in the highly successful footsteps of Maxwell's previous, fully automatic rope / chain anchor winches.Kit Includes Windlass On/Off Breaker Panel Reversing Solenoid Up/down Panel Switch Clutch Release Handle Features The HRC10-8 is Maxwell's fully automatic rope/ chain or all chain horizontal windlass Designed to effortlessly retrieve and deploy 8mm (5/16" ) chain and 16mm (5/8" ) three strand or 8-brait (plait) rope. The HRC 10-8 has a patented uniquely designed chain wheel will accommodate ANY 5/16" or 8 mm marine grade chain spliced to 5/8" rope. The aesthetically pleasing above deck design, evolved from the philosophy of form follows function, encapsulates the motor and drive in a two part watertight case, saving space below deck Case Material: Anodized Aluminum The two part case consists of a die cast, marine-grade hard anodised alloy front section and a rugged and easily removable composite motor cover aft section. This two piece watertight case allows for quick and easy, on-deck,routine maintenance. Simple " bolt down" installation ensures effortless and rapid on-deck installation and set up. The stainless steel pressure arm always exerts maximum control pressure on the rode (rope, splice or chain). The new and revolutionary patented Wave Design chainwheel is able to accommodate a wide range of chain pitch differences, within the specified chain size diameters, suitable for use with the HRC10 Series. The unique Maxwell " wrap around" horizontal chainwheel ensures that more than 90x of the wheel is used, allowing greatly improved rope and chain handling compared with competitor designs. High quality Stainless Steel chainwheels The HRC10 works just as effectively with all-chain rodes for those who desire the added security and holding power of an all-chain anchor system. The integral chain pipe and huge, through deck hawse pipe throat ensures easy entry of the rope / chain rode into and out of the anchor locker. Cone type clutch/brake mechanism permits manual, "free fall" anchoring and emergency crank recovery of the rode and anchor if required. The sealed oil bath and marine-grade hard anodised, alloy gearbox provides high efficiency output drive via precision worm and wormwheel. Exclusive Maxwell 3 YEAR Limited Warranty Specifications Maximum PUll: 1540 lbs Chain Short Link: 5/16" or 8mm Chain Speed (Anchor Retrieval): 79 ft per Minute Rope Speed (Anchor Retrieval): 65 ft per Minute Rope Size (Nylon 3 strand or 8 Plait): 5/8" Power Supply (DC): 12VDC Motor Power: 1000 Watts Net weight: 42 lbs This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Chain - Diameter (Inches): 5/16" Freefall: Yes Rope Diameter (Inches): 5/8" Vertical/Horizontal: Horizontal Box Dimensions: 12"H x 17"W x 19"L WT: 56 lbs UPC: 1000000002683

Read more less

HRC10 Horizontal Rope Chain Windlass - 12V Capstan 3/8" Chain, 5/8" RopeMaxwell's HRC10 represents yet another breakthrough in performance and anchor handling excellence. The horizontal, fully automatic rope/chain windlasses has been designed to meet the demands for use on larger vessels up to 16 meters (52'), which require a completely above deck installation system. The HRC10 handles 5/8" rope and 3/8" chain, including the thick rope to chain splice. The modern appearance of the HRC10 retains the classic good looks of previous Maxwell horizontal windlasses, while incorporating design features years ahead of its competitors.The HRC10 windlass is fitted with Maxwell's unique Wave Design™ chainwheel. The rope/chain wheel incorporates two unique design concepts that greatly improve the handling and control of the rope/chain spliced rode. The outer ribs of the chainwheel are angled slightly forward ensuring that the rope and the chain are smoothly guided in the wheel during anchor retrieval.As the rope pulls into the wheel, the opposite facing inner ribs grip the rope in an undulating manner, securing the rope more firmly in a 'wave pattern' action that is far superior to the traditional 'jam cleat' manner of holding the rope. Not only does this Wave Design™ hold the rope more securely, it is also kinder on the rope resulting in increased longevity of your anchor rode.Features: Aesthetically pleasing above deck design, evolved from the philosophy of form follows function, encapsulates the motor and drive in a two part watertight case, saving space below deck 2-part case consists of a die cast, marine-grade hard anodised alloy front section and a rugged and easily removable composite motor cover aft section 2-piece watertight case allows for quick and easy, on-deck, routine maintenance Simple "bolt down" installation ensures effortless and rapid on-deck installation and set up Stainless steel pressure arm always exerts maximum control pressure on the rode (rope, splice or chain) Wave Design™ chainwheel is able to accommodate a wide range of chain pitch differences, within the specified chain size diameters, suitable for use with the HRC10 Unique Maxwell "wrap around"™ horizontal chainwheel ensures that more than 90° of the wheel is used, allowing greatly improved rope and chain handling compared with competitor designs Works just as effectively with all-chain rodes for those who desire the added security and holding power of an all-chain anchor system The integral chain pipe and huge, through deck hawse pipe throat ensures easy entry of the rope/chain rode into and out of the anchor locker Cone type clutch/brake mechanism permits manual, "free fall"™ anchoring and emergency crank recovery of the rode and anchor if required The sealed oil bath and marine-grade hard anodised, alloy gearbox provides high efficiency output drive via precision worm and wormwheel This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Chain - Diameter (Inches): 3/8" Freefall: Yes Rope Diameter (Inches): 5/8" Vertical/Horizontal: Horizontal Box Dimensions: 11"H x 17"W x 20"L WT: 55 lbs UPC: 1000000002638 Brochure (pdf)

Read more less

Maximum Pull: 1320lbs The larger RC8-8 can be used with 8mm (5/16") chain spliced to 14mm (9/16") three strand or 8-plait rope. The ingeniously designed rope/chain gypsy (chainwheel) is able to accommodate a wide range of chain pitch differences within the specified chain size diameters suitable for use with the RC8 Series. Sleek, low profile and MAX-grip capstan drum versions are available to suit individual user preference. Simple two piece installation saves time and money and allows easy retrofitting without disassembly of the windlass. Unique spacer tube design allows installation through virtually any deck thickness and the multiple mounting positions and self aligning gearbox ensure optimal location of gearbox and motor in virtually all installation situations. Full disassembly capability of top works utilizing handle provided, a screw driver and an Allen key. The RC8 Series is manufactured from marine grade 316 stainless steel for long term durability. The heavy duty stainless steel pressure arm is designed to effectively help grasp the rope/chain splice, giving the RC8 an unparalleled level of performance. In combination with a heavy duty, large wire diameter, stainless steel pre-loaded spring, the pressure arm always exerts maximum control pressure. The RC8 works just as effectively with all-chain rodes for those who desire a low profile, elegantly styled windlass on their foredeck. Huge through deck hawse pipe throat ensures easy entry of the rope/chain rode into and out of the anchor locker. Cone type clutch/brake mechanism permits manual, free fall anchoring. Manual override using the emergency crank handle provided Sealed oil bath and marine grade hard anodised, alloy gearbox provides high efficiency output drive via precision worm and worm wheel. Kits include: windlass , an on/off breaker panel, a reversing soleniod, an up/down panel switch and a handle. Anchor Rode Sold SeperatelyThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Chain - Diameter (Inches): 5/16" Freefall: Yes Rope Diameter (Inches): 9/16" Vertical/Horizontal: Vertical Box Dimensions: 11"H x 18"W x 20"L WT: 44 lbs UPC: 1000000004908 Brochure (pdf)

Read more less

RC10 Automatic Rope/Chain Windlass Designed for 5/16" chain and 5/8" rope combination Maximum pull: 1540 lbs Metric Chain Size: 8mm Motor Wattage: 1000W Innovative heavy duty stainless steel pressure arm, coupled with a unique rope/chain gypsy, giving an unparalleled level of performance. Simple two piece installation, saving time and money and allowing easy retrofitting without disassembly of the windlass. Manufactured from marine grade chromed bronze for long term durability The topworks can be fully disassembled utilizing the handle provided, a screw driver and common allen key, making regular service and maintenance a breeze. No special tools required! A huge, through deck, hawse pipe throat ensures easy entry of the rope/chain rode into and out of the anchor locker Not only does the RC10 effortlessly handle combination rope/chain rodes, it works just as well with all chain rodes for those who may want the extra security of an all chain systems combined with an elegantly styled, low profile windlass on their foredeck. Exclusive Maxwell 3 Year Limited Warranty ensuring your confidence that you are getting the best product on the market. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Chain - Diameter (Inches): 5/16" Freefall: Yes Rope Diameter (Inches): 5/8" Vertical/Horizontal: Vertical Box Dimensions: 11"H x 17"W x 20"L WT: 50 lbs UPC: 1000000004267 Quick Guide (pdf)Brochure (pdf)

Read more less

Gypsy Drum Deck Unit - V4/V5 Lewmar introduces the world's first compact stainless steel windlass for power and sailboats. The beautifully styled deck unit conceals a robust, reliable drivetrain, worm gearbox, and splined shaft for maximum strength and control.Features: Rope-chain gypsy Cone clutch for smooth, effortless control Manual Free-Fall W.A.R.P Drum (Drum version only) Robust and reliable drive train Manual override (optional) The most oversized rope chain windlass in the range *You will also require a gypsy, motor gearbox, circuit breaker, contactor, and switches. Owner's Manual (pdf)

Read more less

Pro-Fish 700 Windlass - 12VThe Lewmar Pro-Fish model is the ultimate windlass for fishermen.  The Pro-Fish has an automatic freefall that allows you to pull right up over a wreck or ledge, and drop anchor with speed and precision.  No more running your motor or wasting fuel while you hover fish.  You can retrieve your anchor just as easily, with the push of a button.  Plus, the Pro-Fish is DIY-ready and made of durable 316 stainless steel.This windlass has been specially designed to suit leaded lines up to 7mm in diameter and a revised control arm and new Pro-Guard plate prevent the rope from jumping out of the windlass or snagging during operation.Features Automatic freefall Powerful motor providing fast line speed Manual emergency recovery equipped all you need is a common 1/2 socket wrench Strong  316 stainless steel, including control arm and stripper Maximum pulling power: 320kg (700 lb) for the 700 and 454kg (1,000 lb) for the 1000 Convenient above-deck installation 5-year warranty For boats up to 12m (38ft) Technical Specifications: Chain Size - 1/4" G4 or BBB Rope Size - 1/2" 3-strand or 8-plait Motor Voltage - 12 Volt DC Motor Power - 500 Watt Maximum Pulling Power - 700lb (318kg) Maximum Working Load - 175lb  (79.38) For boats up to 32' (9.75M) In the Box: Windlass Base gasket Mounting hardware Circuit breaker Dual-direction solenoid Rocker switch Instruction manual  *Sold as an Individual Specifications: Chain - Diameter (Inches): .25 Freefall: Yes Rope Diameter (Inches): .50 Vertical/Horizontal: Horizontal Box Dimensions: 8"H x 11"W x 12"L WT: 20 lbs UPC: 743683306860 Owner's Manual (pdf)

Read more less

V700 Vertical Windlass Kit - 12VWith 100%  316 stainless steel housing and a sleek flush-mount design that hides the motor down below, the V700 is one of the most attractive and durable windlasses on the market.  It works at the push of a button and has two built-in features that make it unique - motor protection and anchor lock. The V700 comes with a gypsy able to accept 1/4 inch chains.Features: For rope, chain, or combination rodes  Built-in motor protection and fail-safe anchor lock Easy installation Fast line speed Manual recovery option Impact-resistant cover Technical Specifications: Material - Stainless Steel Maximum Pull - 700lbs Maximum Line Speed - 82'/min Maximum Chain Size - 1/4" Maximum Rope Size - 1/2" Power - 12 V Maximum Boat Length - 35' Mounting Position - Vertical Weight - 14lbs In the Box: Windlass Switch Dual direction contactor/solenoid Circuit breaker Instruction manual *Sold as an Individual  Specifications: Chain - Diameter (Inches): .25 Freefall: Yes Rope Diameter (Inches): .5 Vertical/Horizontal: Vertical Box Dimensions: 8"H x 11"W x 12"L WT: 20 lbs UPC: 743683302930 Owner's Manual (pdf)

Read more less