Anchoring & Docking

Folding Ladder - 5 Step These Portable Emergency Boarding Ladders are made of molded-in, high-visibility orange polycarbonate with nylon rope supporting the frame. They secure quickly to cleats, railings, stanchions and halyards and will support up to 300 pounds.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Step Count: 5 Step Construction: Plastic Box Dimensions: 4"H x 9"W x 14"L WT: 2.5 lbs UPC: 035514582094

Read more less

13.5" CM Mooring Buoy w/Galvanized Iron - White Blue StripeThe CM Series Mooring Buoy has been designed to provide the ultimate in strength, durability and boat protection, giving increased security to any mooring. With two versions of mooring iron - one from galvanized steel with a protective vinyl-coated eye, and the other from durable stainless steel (SS).  To provide strength and security, each version features a 1/2-inch central rod, a large eye (4-3/8 inch diameter) and a swivel (1-1/2 inch wide). The CM-Series is a long tested standard in mooring buoy design and is preferred by many boaters worldwide. Features: Large eye (4-3/8") and swivel (1-1/2") provide maximum strength Soft vinyl surface won't harm boat finishes Polyform's unique vinyl valve seals securely Even wall thickness for strength and durability One (1) piece design Technical Specifications: Mooring Iron - Galvanized Steel with protective vinyl-coated eye  Size - 13.5" x 18" (34.3 x 45.7cm) Tube Diameter - .625" (1.6cm) Circumference -  42.4" (107.8cm) Volume - 6.6 gallons (25L) *Sold as an Individual Specifications: Color: White Diameter (Inches): 13.5" Box Dimensions: 9"H x 11"W x 37"L WT: 11.8 lbs UPC: 743952007061

Read more less

HTM-2 Fender 8.5" x 20.5" - White with AdapterIn keeping with the Polyform tradition of quality, the HTM (hole-through-middle) boat fender was designed to provide maximum protection in a wide variety of applications.  Vertical ribs for extra protection, reinforced tube ends to prevent lines from pulling through if the fender gets caught in a tight spot, and extra wall thickness to resist punctures and tears are just a few of the features of this high-quality fender has to offer. The HTM Series fender is designed to provide protection and stand-off for larger vessels between 20 to 50 feet in length. Features: Even wall thickness for maximum strength and durability Molded-in ribs for strength and abrasion resistance Reinforced tube ends Designed for medium-duty use in both permanent protected and unprotected moorings Unique Polyform valve for years of service One (1) piece design Technical Specifications: Size (diameter x length) - 8.5" x 20.5" (21.6 x 52.1cm) Tube Diameter - 0.625" (1.6cm) Circumference -  26.7" (67.9cm) Volume -  4.7 gallons (17.8L) Boat Size - 25' - 30' (7.6 - 9.1M) Weight - 4.7lb In the Box: Fender Inflation Adapter  *Sold as a Kit Specifications: Color: White Height: 20.5" Width: 8.5" Box Dimensions: 1"H x 3"W x 6"L WT: 5.05 lbs Brochure (pdf)

Read more less

HTM-3 Fender 10.5" x 27" - GraphiteIn keeping with the Polyform tradition of quality, the HTM (hole-through-middle) boat fender was designed to provide maximum protection in a wide variety of applications.  Vertical ribs for extra protection, reinforced tube ends to prevent lines from pulling through if the fender gets caught in a tight spot, and extra wall thickness to resist punctures and tears are just a few of the features of this high-quality fender has to offer. The HTM Series fender is designed to provide protection and stand-off for larger vessels between 20 to 50 feet in length. Features: Even wall thickness for maximum strength and durability Molded-in ribs for strength and abrasion resistance Reinforced tube ends Designed for medium-duty use in both permanent protected and unprotected moorings Unique Polyform valve for years of service One (1) piece design Technical Specifications: Size (diameter x length) - 10.5" x 27" (26.7 x 68.6cm) Tube Diameter - 0.625" (1.6cm) Circumference -  33" (83.8cm) Volume -  9.2 gallons (34.8L) Boat Size - 30' - 40' (9.1 - 12.2M) Weight - 7.7lb *Sold as an Individual Specifications: Color: Graphite Height: 27" Width: 10.5" Box Dimensions: 8"H x 8"W x 25"L WT: 7 lbs UPC: 743952032032 Brochure (pdf)

Read more less

Motor 12V 1000W1000 Watt 12 Volt Series Wound Replacement Windlass MotorFeatures: 1000 Watt 12 Volt Replacement Windlass Motor Designed for Maxwell 800 / 1000 windlasses 4 hole flange motor replaces the 1000 Watt 12 volt P11112 2 hole flange motor Maxwell has made a change to the mounting flange of CIMA series-wound motors The change consists of adding a second set of mounting holes which allows the motor to be mounted 90? from the original orientation Replaces Maxwell P11112 This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Replacement Pressure Arm f/HRCFF WindlassFeatures: Applications: HRCFF Sold Individually

Read more less

Motor Cima - 1200W - 24V - 4-Hole Flange 24V 1200W DC 3500RPM IP66 Diameter: 114 x 181mm This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Foot Switch & Cover - Stainless SteelMaxwell heavy-duty, weather resistant units have a UV stabilized water proof diaphragm and are supplied complete with mounting instructions and screws.Features: Rated at 150 amps and suitable for 12V or 24V applications Nickel-plated copper contacts ensure corrosion-free, reliable operation Polished stainless steel bezel and cover

Read more less

RC8-6 Vertical Windlass 1/4" Chain, Rope 1/2" 12vPackage Includes Windlass On/Off Breaker Panel Reversing Solenoid Up/down Panel Switch Emergency crank / clutch release handle Features Simple two piece installation saves time and money and allows easy retrofitting without disassembly of the windlass Unique spacer tube design allows installation through virtually any deck thickness and the multiple mounting positions and self aligning gearbox ensure optimal location of gearbox and motor in virtually all installation situations Fully automatic rope / chain windlass is designed to effortlessly retrieve and deploy 1/4" (6mm / 7mm) chain spliced to 1/2" (12 mm) three strand or 8-brait (plait) rope The ingeniously designed rope/chain gypsy (chainwheel) is able to accommodate a wide range of chain pitch differences within the specified chain size diameters suitable for use with the RC8 Series Full disassembly capability of topworks utilising handle provided and an Allen key The RC8 Series is manufactured from marine-grade 316 stainless steel for long term durability The heavy duty stainless steel pressure arm is designed to effectively help grasp the rope/chain splice, giving the RC8 an unparalleled level of performance In combination with a heavy duty, large wire diameter, stainless steel preloaded spring, the pressure arm always exerts maximum control pressure The RC8 works just as effectively with all-chain rodes for those who desire a Low Profile, elegantly styled windlass on their foredeck Huge, through deck hawse pipe throat ensures easy entry of the rope/chain rode into and out of the anchor locker Full disassembly capability of the topworks utilising only the handle provided and an Allen key Manual override using the emergency crank handle provided Sealed oil bath and marine-grade hard anodised, alloy gearbox provides high efficiency output drive via precision worm and worm wheel All RC Series windlasses are fitted with Maxwell's unique Wave Design™ chainwheel This patented rope/chain wheel incorporates two unique design concepts that greatly improve the handling and control of the rope/chain spliced rode The outer ribs of the chainwheel are angled slightly forward ensuring that the rope and the chain are smoothly guided in the wheel during anchor retrieval As the rope pulls into the wheel, the opposite facing inner ribs grip the rope in an undulating manner, securing the rope more firmly in a 'wave pattern' action that is far superior to the traditional 'jam cleat' manner of holding the rope Not only does this Wave Design™ hold the rope more securely, it is also kinder on the rope resulting in increased longevity of your anchor rode Wave Design™ Chainwheel Is fitted to all RC Series windlasses, designed for anchor rodes with any marine grade chain, G4, BBB, Proof Coil and MetricSpecifications Material: Marine-Grade 316 Stainless Steel Power: 12 Volt DC, 600 Watts Chain / Short Link: 1/4" ( 6mm / 7mm ) Maximum Pull: 770 lbs ( 350kg ) Rope Size: (Nylon)* (3-Strand or 8 Plait Recommended) 1/2" (12mm) Chain Speed (Anchor Retrieval): 92 Feet per Minute (28 m / min) Rope Speed (Anchor Retrieval): 79 Feet per Minute (24 m / min)This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Chain - Diameter (Inches): 1/4" Freefall: Yes Rope Diameter (Inches): 1/2" Vertical/Horizontal: Vertical Box Dimensions: 11"H x 17"W x 19"L WT: 31.8 lbs UPC: 1000000004847

Read more less

Anchor Rode 15’ 5/16” G4 Chain with 150’ 9/16” RopeAn anchor rode is an important part of the anchoring system, and sailors rely on it to connect the anchor to a boat. Lewmar anchor rodes are designed for exceptional performance. The strong nylon rope with a hot-dip-galvanized G4 chain makes the rope-to-chain transition smooth and promotes maximum efficiency in operation.Features: High-strength, welded chain rated to high-test G4 specs  Hot-dip-galvanized chain links to minimize corrosion Calibrated for an even pitch Smooth rope-to-chain transition for seamless windlass operation Treated, windlass-grade, 3-strand, twisted nylon rope Fitted to all Lewmar windlasses and rope chain gypsies Works With:Pro-series, ProFish 100-, V1, 2 & 3, along with H2 & 3 windlassesSpecifications: Rope: 150 ft. 9/16 in. 3-strand nylon  Chain: 15 ft. 5/16” G4 chain Specifications: Chain - Diameter (Inches): 5/16" Chain - Length (Feet): 15' Rope Diameter (Inches): 9/16" Rope Length (Feet): 150' Rope Type: 3-Strand Nylon Box Dimensions: 12"H x 12"W x 12"L WT: 27.65 lbs UPC: 743683406256

Read more less

Super Gard™ 8.5" x 26" Inflatable Vinyl Fender - BlueTaylor Made Products has incorporated the latest in technology, design innovation, and attention to detail to bring you the finest looking, top performing protection for your dollar. Super Gard™ fenders are in a class of their own. Made from the highest quality marine grade vinyl, Super Gards™ feature a HIGH GLOSS finish and double molded black ends for extra strength where you need it the most. Seamless one-piece construction with ribbed sides minimizes roll, and a molded-in valve ensures easy inflation and long life. Boat Size: 25' to 35' Recommended inflation is 2 psi. * The most accurate way to select the right fender for your boat is to survey your docking area to find out what fender is in use for the same size and weight of boat, in terms of fender dimensions and quantities, and use that as a guideline.Lifetime Warranty against splitting or bursting Specifications: Color: Blue Height: 26" Width: 8.5" Box Dimensions: 8"H x 8"W x 28"L WT: 5.4 lbs UPC: 040011007902

Read more less

Motor Mounting Bracket for Axis & Vector Shallow Water Anchors - WhiteLewmar Motor Mounting Bracket for Shallow Water Anchors. No-Drill Installation allows mounting directly to the Engine Bracket. Compatible with Lewmar Axis and Vector.

Read more less