Anchoring & Docking

Double Braided Nylon Dock Line - 1/2" x 30' - BlackFeatures:  Double Braided Nylon Dock Lines 100% premium double braided nylon Professionally spliced soft eye at one end Yacht whipped at the bitter end and splice point WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: Black Length (Feet): 30' Rope Diameter (Inches): 1/2" Tracer: No Rope Type: Braided Nylon Box Dimensions: 4"H x 6"W x 15"L WT: 2.25 lbs UPC: 035514302555

Read more less

HTM-3 - 10" x 30" - Single Layer - NavyMaster Fender Covers are specially designed to protect the topsides and hull from fender scuff and reduce the need for expensive gel coat repairs.They are made from a premium stain resistant, non-abrasive, loop-knit acrylic fabric, which is both durable and fade resistant. They are available in a variety of colors and sizes to suit your individual requirements. Specifications: Color: Navy Blue Box Dimensions: 3"H x 10"W x 11"L WT: 0.7 lbs UPC: 817382010424

Read more less

Quick Anchor-Rode Rope and Chain15' of 7mm Chain, 300' of 1/2" RopeSlim Splice Quick System Rope and chainAn anchor-rode is the connection system between anchor and the boat and itssturdiness during mooring is undoubtedly essential.The critical point of the rope and chain combination is the joint, ortechnically speaking, the splice.In Quick's Slim Splice, the splice is much slimmer and more tapered,preventing the jamming which often occurs on the gypsy, during changeoverfrom rope to chain.Quick's Slim Splice consists of a calibrated chain and a top quality3-strand polyester rope, to guarantee optimum strength and life. Specifications: Rope Type: 3-Strand Nylon Rope Length (Feet): 300' Rope Diameter (Inches): 1/2" Chain - Length (Feet): 15' Chain - Diameter (Inches): 7mm Box Dimensions: 15"H x 15"W x 15"L WT: 35.3 lbs UPC: 8057090077506

Read more less

Spare Pole Clips - RubberIf you are looking to mount your poles in more than one location or lost the clips that come with your poles these are the exact replacements.

Read more less

Parallel ConnectorA vital component in the Polyform True Fit Modular System of fender holders.   Polyform's Parallel Connector is used to connect Polyform single fender holders together, to form a fender holder series. Polyform recommends the use of two (2) Parallel Connectors to be used for each Fender Holder connection.Features: Made of ABS plastic Color - Black *Sold as an Individual

Read more less

F-5 Twin Eye Fender 11" x 30" - WhitePolyform has been producing the F Series fender for over 50 years and there is no comparison when it comes to quality, range of sizes, and protection offered.  The F Series fender has offered protection to the world's finest yachts and fishing vessels.  Why?  Because the owners and captains of these prestigious boats know that they can rely on Polyform’s F Series fenders to offer the size, strength, and dependability to protect their vessels from the rigors of the sea and weather. If you want the ultimate protection for your boat, Polyform F Series fenders are the only choice! Classic European twin-eye style boat fenders for the most discerning eye.Features: Even wall thickness for maximum strength and durability Molded-in ribs for strength and abrasion resistance Reinforced ropeholds Designed for use by trailered boats and in permanent protected moorings Twin-eye design for vertical or horizontal use Unique Polyform valve for years of service One (1) piece design Technical Specifications: Size (diameter x length) - 11" x 30" (27.9 x 76.2cm) Eye Diameter - 1" (2.54cm) Circumference - 34.6" (87.8cm) Volume - 7.3 gallons (27.6L) Boat Size - 30' - 40' (18.29 - 21.34M) Weight - 7.6lbs *Sold as an Individual Specifications: Color: White Height: 30" Width: 11" Box Dimensions: 1"H x 16"W x 24"L WT: 6.1 lbs UPC: 743952005463 Brochure (pdf)

Read more less

HTM-2 Fender 8.5" x 20.5" - White with AdapterIn keeping with the Polyform tradition of quality, the HTM (hole-through-middle) boat fender was designed to provide maximum protection in a wide variety of applications.  Vertical ribs for extra protection, reinforced tube ends to prevent lines from pulling through if the fender gets caught in a tight spot, and extra wall thickness to resist punctures and tears are just a few of the features of this high-quality fender has to offer. The HTM Series fender is designed to provide protection and stand-off for larger vessels between 20 to 50 feet in length. Features: Even wall thickness for maximum strength and durability Molded-in ribs for strength and abrasion resistance Reinforced tube ends Designed for medium-duty use in both permanent protected and unprotected moorings Unique Polyform valve for years of service One (1) piece design Technical Specifications: Size (diameter x length) - 8.5" x 20.5" (21.6 x 52.1cm) Tube Diameter - 0.625" (1.6cm) Circumference -  26.7" (67.9cm) Volume -  4.7 gallons (17.8L) Boat Size - 25' - 30' (7.6 - 9.1M) Weight - 4.7lb In the Box: Fender Inflation Adapter  *Sold as a Kit Specifications: Color: White Height: 20.5" Width: 8.5" Box Dimensions: 1"H x 3"W x 6"L WT: 5.05 lbs Brochure (pdf)

Read more less

18" Smooth Rolling Wheel Offers substantial dock cushioning and features molded-in valves to adjust the level of firmness. Heavy-duty Hot Dipped galvanized hardware mounts securely to the dock. Guides boats into your slip easily, regardless of wind andcurrent conditions.Integrally molded ribs both top and bottom of these wheels makes them valuable dock and boat protection and formidable guards against impacts. Specifications: Color: White Box Dimensions: 11"H x 18"W x 20"L WT: 19.1 lbs UPC: 776113950777 Owner's Manual (pdf)

Read more less

Generation 3 Pro-Series Gears and Shaft Kit Gears and shaft kit for Generation 3 Pro-Series windlasses.Compatible With: Pro-Series Generation 2 windlasses*Sold as an Individual 

Read more less

Fixed Anchor Swivel - 3/8" to 7/16"Heavy-duty 360-degree anchor swivel.  Used to attach line and chain or chain and anchor.Compatible with:3/8" to 7/16" ChainFeatures: Stainless Steel screw pins Stainless Steel swivel pins Technical Specifications:Material - 316 Stainless Steel*Sold as an Individual

Read more less

Pro-Series Generation 3 Washer Kit Replacement washer kit for Pro-Series Genration 3 windleasses.Compatible With:Pro-Series Generation 3 windlass*Sold as an Individual 

Read more less

V700 Fastening Kit 1 (Metric) Replacement fastening kit 1 for V700 windlasses.Compatible With:Lewmar V700 windlass*Sold as an Individual Owner's Manual (pdf)

Read more less