Anchoring & Docking

HTM-2 Fender 8.5" x 20.5" - BlackIn keeping with the Polyform tradition of quality, the HTM (hole-through-middle) boat fender was designed to provide maximum protection in a wide variety of applications.  Vertical ribs for extra protection, reinforced tube ends to prevent lines from pulling through if the fender gets caught in a tight spot, and extra wall thickness to resist punctures and tears are just a few of the features of this high-quality fender has to offer. The HTM Series fender is designed to provide protection and stand-off for larger vessels between 20 to 50 feet in length. Features: Even wall thickness for maximum strength and durability Molded-in ribs for strength and abrasion resistance Reinforced tube ends Designed for medium-duty use in both permanent protected and unprotected moorings Unique Polyform valve for years of service One (1) piece design Technical Specifications: Size (diameter x length) - 8.5" x 20.5" (21.6 x 52.1cm) Tube Diameter - 0.625" (1.6cm) Circumference -  26.7" (67.9cm) Volume -  4.7 gallons (17.8L) Boat Size - 25' - 30' (7.6 - 9.1M) Weight - 4.7lb *Sold as an Individual Specifications: Color: Black Height: 20.5" Width: 8.5" Box Dimensions: 5"H x 12"W x 19"L WT: 4.9 lbs UPC: 743952004046 Brochure (pdf)

Read more less

G-3 Twin Eye Fender 5.5" x 19" - Metallic BluePolyform’s G Series boat fender has raised the bar for quality and appearance in utility fenders. Subscribing to the philosophy that quality does not have to cost more, we include ribs for extra strength, inflation valves for larger sizes, and reinforced ropeholds for long-term durability. Utility boat fenders with Polyform dependability.Features: Even wall thickness for maximum strength and durability Molded-in ribs for strength and abrasion resistance Reinforced ropeholds Designed for use by trailered boats and in permanent protected moorings Twin-eye design for vertical or horizontal use Unique Polyform valve for years of service One (1) piece design Technical Specifications: Size (diameter x length) - 5.5" x 19" (14 x 48.3cm) Eye Diameter - .625" (1.6cm) Circumference - 17.3" (43.9cm) Volume - 1.4 gallons (5.3L) Boat Size - 15' - 20' (4.6 - 6.1M) Weight - 1.9lbs *Sold as an Individual Specifications: Color: Blue Height: 19" Width: 5.5" Box Dimensions: 6"H x 6"W x 19"L WT: 1.95 lbs UPC: 743952035972 Brochure (pdf)

Read more less

G-4 Twin Eye Fender 6.5" x 22" - Metallic GraphitePolyform’s G Series boat fender has raised the bar for quality and appearance in utility fenders. Subscribing to the philosophy that quality does not have to cost more, we include ribs for extra strength, inflation valves for larger sizes, and reinforced ropeholds for long-term durability. Utility boat fenders with Polyform dependability.Features: Even wall thickness for maximum strength and durability Molded-in ribs for strength and abrasion resistance Reinforced ropeholds Designed for use by trailered boats and in permanent protected moorings Twin-eye design for vertical or horizontal use Unique Polyform valve for years of service One (1) piece design Technical Specifications: Size (diameter x length) - 6.5" x 22" (16.5 x 55.9cm) Eye Diameter - .75" (1.9cm) Circumference - 20.4" (51.9cm) Volume - 2.2 gallons (8.3L) Boat Size - 20' - 25' (6.1 - 7.6M) Weight - 2.7lbs *Sold as an Indvidual Specifications: Color: Graphite Height: 22" Width: 6.5" Box Dimensions: 7"H x 7"W x 22"L WT: 2.8 lbs UPC: 743952035996 Brochure (pdf)

Read more less

Wireless Remote for G3 Anchor Winch Allows push-button anchor winch operation from any location.  The wireless remote clips into a handy storage bracket that can be mounted on your helm or anywhere you wish.  You have the option of using the remote anywhere in the boat, or using it like a dash-mounted switch.Compatible With:  TRAC G3 Fisherman 25 (69002/T10108-G3) and Pontoon 35 (69003/T10109-G3)Features: Allows push-button anchor winch operation from any location Wireless remote clips into a handy storage bracket  *Sold as an Individual WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Dock Builders Cleat - Angled Aluminum Rail Cleat - 10"Features: Designed for aluminum framed docks Fits most OEM dock builder style docks with an aluminum extrusion Slides easily into place Angle allows for stronger hold Specifications: Construction: Aluminum Alloy Finish: Silver Size: 10" Box Dimensions: 2"H x 4"W x 10"L WT: 1.58 lbs UPC: 776113243008

Read more less

A-5 Buoy 27" Diameter - GreyThe A-Series is the product that launched the Polyform story.  This all-purpose product, with the signature "blue ropehold" has proven itself in the most adverse conditions. Marking gear used in heavy seas is no easy task.  That's why more fishermen use Polyform A-Series than all other buoys combined.  You name it, ocean, sea, or river, and the A-Series has been there. Put your trust in Polyform's most versatile and well-known product.Features: Even wall thickness for maximum thickness Heavy duty reinforced ropeholds Polyform's unique vinyl valve system Dual valve inflation/deflation system  Excellent choice for a rafting fender  One (1) piece design Technical Specifications: Size - 27" x 36" (68.6 x 91.4cm) Eye Diameter - 1.25" (3.2cm) Circumference - 84.9" (215.5cm) Volume - 47.6 gallons (180.2L) Boat Size - 60' and greater (18.3M) *Sold as an Individual Specifications: Color: Grey Diameter (Inches): 27" Box Dimensions: 4"H x 18"W x 37"L WT: 18.5 lbs Brochure (pdf)

Read more less

Leather Mooring Line Chafe Kit - 3/4" Mooring line chafe kits include: Waxed twine, heavy duty needle and (2) 10” pieces of leather pre-stamped for sewing. Used to reduce chafe and extend the life of mooring lines. Natural leather - color may vary.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Leather Mooring Line Chafe Kit - 5/8" Mooring line chafe kits include: Waxed twine, heavy duty needle and (2) 10” pieces of leather pre-stamped for sewing. Used to reduce chafe and extend the life of mooring lines. Natural leather - color may vary.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Commando Small Craft Anchoring SystemOriginally developed for military raiding craft, the Commando offers a no-nonsense solution to the problems of anchor storage and deployment on small boats.Everything can be stored inside the rugged Dupont® Cordura® Plus storage bag, including the disassembled Guardian G-5, the best small boat anchor.   The modified Guardian anchor can be assembled quickly without tools.  The bag itself can be attached permanently to the boat. Perfect for Inflatables, Bass Boats, Personal Watercraft, Runabouts, Tenders, Ski Boats, and more.*Made in the U.S.A.Features: Anchor has wing nuts and bolts for assembly/disassembly without tools Custom Dupont Cordura Plus storage bag Rust-proof and non-magnetic materials Technical Specifications: Size of Boat - Up to 16' (5 M) Weight - 2.5lbs (1.1 kg) Style - Fluke Material - High-tech aluminum alloy  In the Box: Guardian G-5 anchor 150' (46 M) 1/4" of braided nylon rope 6' (2 M) 3/16" of high tensile galvanized steel chain 1/4" (6mm) galvanized shackle Custom Dupont Cordura Plus storage bag *Sold as an Individual Specifications: Color: Aluminum Construction: Aluminum Alloy Weight (lbs): 2.5 Box Dimensions: 4"H x 8"W x 21"L WT: 7.3 lbs UPC: 647124910053

Read more less

A-2 Buoy 14.5" Diameter - GreyThe A-Series is the product that launched the Polyform story.  This all-purpose product, with the signature "blue ropehold" has proven itself in the most adverse conditions. Marking gear used in heavy seas is no easy task.  That's why more fishermen use Polyform A-Series than all other buoys combined.  You name it, ocean, sea, or river, and the A-Series has been there. Put your trust in Polyform's most versatile and well-known product.Features: Even wall thickness for maximum thickness Heavy duty reinforced ropeholds Polyform's unique vinyl valve system Dual valve inflation/deflation system  Excellent choice for a rafting fender  One (1) piece design Technical Specifications: Size - 14.5" x 19.5" (36.8 x 49.5cm) Eye Diameter - 1.125" (2.9cm) Circumference - 45.6" (115.8cm) Volume - 8.2 gallons (31L) Boat Size - 30 - 40 (9.1 - 12.2M) *Sold as an Individual Specifications: Color: Grey Diameter (Inches): 14.5" Box Dimensions: 7"H x 15"W x 19"L WT: 4.45 lbs Brochure (pdf)

Read more less

G-3 Twin Eye Fender 5.5" x 19" - Cobalt Blue Polyform’s G Series boat fender has raised the bar for quality and appearance in utility fenders.  Subscribing to the philosophy that quality does not have to cost more, we include ribs for extra strength, inflation valves for larger sizes and reinforced ropeholds for long-term durability. Utility boat fenders with Polyform dependability.Features: Even wall thickness for maximum strength and durability Molded-in ribs for strength and abrasion resistance Reinforced ropeholds Designed for use by trailered boats and in permanent protected moorings Twin-eye design for vertical or horizontal use Unique Polyform valve for years of service One (1) piece design Technical Specifications: Size (diameter x length) - 5.5" x 19" (14 x 48.3cm) Eye Diameter - .625" (1.6cm) Circumference - 17.3" (43.9cm) Volume - 1.4 gallons (5.3L) Boat Size - 15' - 20' (4.6 - 6.1M) Weight - 1.9lbs *Sold as an Individual Specifications: Color: Blue Height: 19" Width: 5.5" Box Dimensions: 6"H x 6"W x 19"L WT: 1.85 lbs UPC: 743952002844 Brochure (pdf)

Read more less

Single-Hook Anchor Chain Tensioner for 3/8" ChainThese fittings will securely tension and hold the anchor in the bow roller channel.  They will free up use of the bow cleat and prepare the anchor for sea condition assuring you peace of mind.  This fitting is not designed to take the strain of the rode of a boat at anchor.  "Single Hook" style has overall length of 12", the threaded hook has 1-1/2" of adjustment for ease of installation.

Read more less