Anchoring & Docking

FX-11 - Shank Original replacement shank for the FX-11 anchor.*Sold as an Individual

Read more less

FX-7 - Crown Original replacement crown for the FX-7 anchor.*Sold as an Individual

Read more less

Pro-Series Horizontal 700 Windlass Kit - 12VPraised by professionals worldwide, the horizontal Pro-Series is a shining example of Lewmar's commitment to providing quality products for boats. It's DIY-ready, easy to install, and housed in 100% 316 stainless steel, making it well protected and durable and with push-button control and a built-in manual emergency recovery system.Anchoring has never been easier.Features: Powerful motor providing fast line speed Manual emergency recovery equipped  Convenient above-deck installation Technical Specifications: Material - Stainless Steel Maximum Pull - 700lbs Maximum Line Speed - 82'/min Maximum Chain Size - 1/4" Maximum Rope Size - 1/2" Power - 12 V Maximum Boat Length - 32' Mounting Position - Horizontal In the Box: Windlass Switch Circuit breaker Dual direction contactor/solenoid Instruction manual *Sold as an Individual Specifications: Chain - Diameter (Inches): .25 Freefall: Yes Rope Diameter (Inches): .5 Vertical/Horizontal: Horizontal Box Dimensions: 9"H x 11"W x 12"L WT: 30 lbs UPC: 743683306488 Owner's Manual (pdf)

Read more less

Anchor Rode 5' of 1/4" G4 Chain & 100' of 1/2" Rope with ShackleThis Lewmar 105' anchor rode kit features 5 feet' of windlass chain spliced to 100' of 3-strand line and comes with a D shackle.Features: Specifically made to go with the rope-chain gypsies that come standard on all Lewmar windlasses Calculated for an even pitch The hot-dip galvanizing reduces corrosion High-strength welding Your windlass runs more smoothly with a smooth rope-to-chain transition Hand-sewed whipping assures unraveling Technical Specifications: Total Length: 105 ft. Chain Length: 5 ft. Chain Size: 1/4 in. Chain Type: G4 Rope Length: 100 ft. Rope Size: 1/2 in. Rope Type: 3 Strand Shackle: 5/16 in. D *Sold as an Individual Specifications: Chain - Diameter (Inches): 1/4" Chain - Length (Feet): 5' Rope Diameter (Inches): 1/2" Rope Length (Feet): 100' Rope Type: 3-Strand Nylon Box Dimensions: 12"H x 12"W x 12"L WT: 12 lbs UPC: 743683406416

Read more less

Anchor Lock for Up to 55lb AnchorsAnchor lock holds up to a 55lb anchor in place and prevents accidental deployment.Features: Surface mountable Works with chain or shackle Corrosion-resistant  Easy installation Technical Specifications: Material - Stainless Steel Pin Size - .25" Dimensions (H x L x W) - 1.5" x 4" x 1.5" Max. Capacity - 55lbs *Sold as an Individual

Read more less

Solenoid in Watertight Control Box - 12VHeavy-duty dual-direction solenoid that controls the up/down operations of Lewmar Concept 1 and V-Series windlasses. Features: Controls Up / Down operation Ideal for windlass installations in chain locker or other damp locations Nominal voltage - 12V *Sold as an Individual

Read more less

Swivel Connector - 1-1/8" - 1-1/4" RailA vital component in the Polyform True Fit Modular System of fender holders.  The Polyform swivel connector allows a fender holder(s) to be safely and securely attached to a rail 1-1/8" to 1-1/4" in size.Polyform Recommends: Use (2) Swivel Connectors for one fender holder Use (3) Swivel Connectors when two fender holders are secured together Use (4) Swivel Connectors when three fender holders are secured together Features: Made of ABS plastic Color - Black *Sold as an Individual

Read more less

Swivel Connector - 7/8" - 1" RailA vital component in the Polyform True Fit Modular System of fender holders.  The Polyform swivel connector allows a fender holder(s) to be safely and securely attached to a rail 7/8" to 1" in size.Polyform Recommends: Use (2) Swivel Connectors for one fender holder Use (3) Swivel Connectors when two fender holders are secured together Use (4) Swivel Connectors when three fender holders are secured together Features: Made of ABS plastic Color - Black *Sold as an Individual

Read more less

Delta® Anchor - Galvanized - 14lbIts unique shank profile and ballasted tip make the Delta® anchor self-launching.  The low center of gravity and self-righting geometry ensure that the Delta® anchor will be set immediately. Consistent and reliable in performance, the Delta® anchor has Lloyd's Register General Approval of an Anchor Design as a High Holding Power anchor and is specified as the primary anchor used by numerous National Lifeboat organizations. All Delta® anchors are "guaranteed for life against breakage."Features: Self-launching Lloyd's Register Type Approval Guaranteed for life against Breakage Technical Specifications: Material - Manganese steel  Recommended Chain Size - 1/4" Weight - 14lb (6kg) In the Box: Anchor Instruction manual *Sold as an Individual Specifications: Construction: Galvanized Weight (lbs): 14 Box Dimensions: 6"H x 8"W x 22"L WT: 15 lbs UPC: 743683314520 Brochure (pdf)

Read more less

G-2 Twin Eye Fender 4.5" x 15.5" - Sand Polyform’s G Series boat fender has raised the bar for quality and appearance in utility fenders. Subscribing to the philosophy that quality does not have to cost more, we include ribs for extra strength, inflation valves for larger sizes, and reinforced ropeholds for long-term durability. Utility boat fenders with Polyform dependability.Features: Even wall thickness for maximum strength and durability Molded-in ribs for strength and abrasion resistance Reinforced ropeholds Designed for use by trailered boats and in permanent protected moorings Twin-eye design for vertical or horizontal use Unique Polyform valve for years of service One (1) piece design Technical Specifications: Size (diameter x length) - 4.5" x 15.5" (11.4 x 39.4cm) Eye Diameter - .5" (1.3cm) Circumference - 14.1" (35.9cm) Volume - .7 gallons (2.6L) Boat Size - 10' - 15' (3 - 4.6M) Weight - 1.4lbs *Sold as an Individual  Specifications: Color: Sand Height: 15.5" Width: 4.5" Box Dimensions: 4"H x 4"W x 16"L WT: 1.4 lbs UPC: 743952003636 Brochure (pdf)

Read more less

G-2 Twin Eye Fender 4.5" x 15.5" - Sand with AdapterPolyform’s G Series boat fender has raised the bar for quality and appearance in utility fenders. Subscribing to the philosophy that quality does not have to cost more, we include ribs for extra strength, inflation valves for larger sizes, and reinforced ropeholds for long-term durability. Utility boat fenders with Polyform dependability.Features: Even wall thickness for maximum strength and durability Molded-in ribs for strength and abrasion resistance Reinforced ropeholds Designed for use by trailered boats and in permanent protected moorings Twin-eye design for vertical or horizontal use Unique Polyform valve for years of service One (1) piece design Technical Specifications: Size (diameter x length) - 4.5" x 15.5" (11.4 x 39.4cm) Eye Diameter - .5" (1.3cm) Circumference - 14.1" (35.9cm) Volume - .7 gallons (2.6L) Boat Size - 10' - 15' (3 - 4.6M) Weight - 1.4lbs In the Box: Fender Inflation Adapter  *Sold as a Kit Specifications: Color: Sand Height: 15.5" Width: 4.5 Box Dimensions: 1"H x 3"W x 6"L WT: 1.5 lbs Brochure (pdf)

Read more less

Parallel ConnectorA vital component in the Polyform True Fit Modular System of fender holders.   Polyform's Parallel Connector is used to connect Polyform single fender holders together, to form a fender holder series. Polyform recommends the use of two (2) Parallel Connectors to be used for each Fender Holder connection.Features: Made of ABS plastic Color - Black *Sold as an Individual

Read more less