Automotive/RV - Accessories

LED Battery TesterSpecifically for all 12 Volt DC batteries.

Read more less

RV Macerator PumpDesigned to add flexibility to Holding Tank service. With the Flojet Waste Pump, you can not only empty the black and grey water tanks at the conventional Dump Station but also down a toilet, into your house sewer clean-out, septic tank, or into a mobile waste wagon.The Flojet macerator pump will empty a typical 30-gallon holding tank in less than three minutes. The time increases somewhat as the distance pumped is increased beyond 25'. The pump will macerate and pump all waste and tissue normally found in RV waste systems. The same high-quality Jabsco design is found in boat stores worldwide. Put an end to handling and rinsing a dirty 3" sewer hose; instead use a cleaner, easier to handle garden hose. Now you can pump uphill, and around corners. The RV waste pump will simplify and improve your RV experience!Features: A neat and clean way to quickly evacuate waste tanks Empty black-water and greywater Holding Tanks at home Grinds waste as it pumps Built-in Impeller Protection Device...longer life! The flow of up to 13 GPM for fast, clean Holding Tank evacuation Easy to InstallBecause it is self-priming, it may be located up to four feet above the tank liquid level. The intake port is designed to accept a 3" ID slip-on hose and the discharge port will accept a 1" ID hose. When installed, the macerator can be used to empty the holding tank into any convenient sewer receiver such as a sewer clean-out at your home.Applications Empty holding tanks and avoid dump stations Transfer waste from recirculating toilets to main holding tank Impeller Release FeatureAfter long periods of non-use, a stuck impeller can be easily broken loose with a screwdriver inserted in motor shaft slot. Simply turn shaft clockwise as shown.Specifications: Pump: Self-Priming Flexible Impeller with Stainless Steel Wearplate Impeller: "Jabsco Nitrile" compound Macerator: Stainless Steel Cutter reduces particle size to 1/8" (3mm) maximum Seal: Lip Type Ports: Inlet RV model - 3" (76mm) hose Outlet - 1" (19mm) Hose Barb Motor: Permanent Magnet Type, Fully Enclosed, with Stainless Steel Shaft Includes Impeller Protection Device that shuts-off pump after 20 seconds of run-dryComplies with USCG Regulation 183.410 & ISO 8846 MARINE for Ignition ProtectionWeight: 3.5lb (1.6 kg) Approx.WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Owner's Manual (pdf)Brochure (pdf)

Read more less

In-Season Protection - 10oz *Case of 6*STA-BIL In-Season Protection Fuel System Treatment, America's #1 Ethanol Treatment, is engineered to combat the negative effects of ethanol-blended fuels. This industry-leading formula prevents corrosion, cleans the fuel system, and prevents the buildup of unwanted gum and varnish, ensuring your equipment will be ready to go whenever you need it. 1oz treats 5 gallons of gas. If using small engine equipment, pour directly into your gas can. It is best practice to add STA-BIL In-Season Protection Fuel System Treatment to a vehicle before adding fresh fuel at the pump. This product is designed to be added to the fuel as soon as you get it, so that you know the fuel is fresh. This formula will also keep gas fresh for up to a year. Use throughout the season to make sure your engine runs top-notch year-round!Features: America’s #1 Ethanol Treatment Prevents Corrosion Caused By Ethanol Blended Fuels Increases Engine Power and Fuel Efficiency Effective In All Gasoline, Including Ethanol and Non-Ethanol Engineered For Year-Round Usage - Use At Every Fill-Up Keeps Fuel Fresh For Up To 12 Months

Read more less

1K HS Clear - 20oz Aerosol Can - Semi-Gloss Finish1K HS Clear is a high solids clearcoat, perfect for refinishing small accessories, door jambs, underhoods, inner panels, and new part cut-ins.Features: Improved fan pattern is second only to a spray gun Three gloss levels: gloss, semi-gloss, and matte Matches OEM finishes  Quick drying for increased production Shop floor compliant (NESHAP 6H) Save time and material Reduces repair time and steps to maximize shop efficiency Applications: Ez Coat™ Factory Pack™ Basecoat Properties: 20 oz. aerosol Coats: 2 - 3 medium coats Flash Time: 3 - 5 min between coats Coverage: 28.6 sq ft. @ 1 mil DFT

Read more less

1K HS Clear - 20oz Aerosol Can - Matte Finish1K HS Clear is a high solids clearcoat, perfect for refinishing small accessories, door jambs, underhoods, inner panels, and new part cut-ins.Features: Improved fan pattern is second only to a spray gun Three gloss levels: gloss, semi-gloss, and matte Matches OEM finishes  Quick drying for increased production Shop floor compliant (NESHAP 6H) Save time and material Reduces repair time and steps to maximize shop efficiency Applications: Ez Coat™ Factory Pack™ Basecoat Properties: 20 oz. aerosol Coats: 2 - 3 medium coats Flash Time: 3 - 5 min between coats Coverage: 28.6 sq ft. @ 1 mil DFT

Read more less

Ultimate 757 12V 2-Speed 7" Fan - Direct Wire - BlackDirect wire only. FingerSafe blade allows for maximum airflow. Two-speed options.The 757 Ultimate 12V DC fan has long been a favorite among Caribbean sailors where good boat ventilation is a must. The two-speed motor and FingerSafe blade move large masses of air throughout the boat from the V-berth to the galley. This is the fan that will let boaters enjoy their boating investment.Features: Two speeds Direct wire Comes with a permanent mounting option Long life, low power drawing motor Adjustable base and tilting head Benefits: Maximum airflow Easy to clean Easy to install Quiet, dependable operation Direct air in any direction Match any boat interior The fan stays in place in rough seas Owner's Manual (pdf)Brochure (pdf)

Read more less

Replacement Blade for Chinook with Rocker Switch - WhiteReplacement Blade specifically for Chinook with Rocker Switch.Color: White

Read more less

Mounting Clamp Accessory for Ultimate 747 & 757Mounting Clamp Accessory specifically for Ultimate 747 and 757.

Read more less

Flex TrimLength: 25'"A": 5/32""B": 9/16"Color: WhiteTACO Metals supplies quality trim that is designed to protect boat interiors and exteriors from the harsh marine environment.Trim & MouldingTrim and moulding products provide finish, protection and structural integrity. TACO trim and moulding products are the best in the industry and are used extensively throughout boat interiors and exteriors.MaterialsDepending on the product line, TACO's trim and moulding products are offered in aluminum, vinyl and specially formulated rubber compounds. TACO insists on using prime billet 6000 series aluminum alloys to ensure superior structural strength, precise bending and long-lasting performance. Vinyl and plastic products are made from prime resin and warranted for 5 years. Covers unfinished edges and follows almost any contour or radius Made of flexible PVC Integrated interior aluminum clip and gripping tongue ensures a better fit This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

VersiJet Industrial Diaphragm Pump - 115V, 4 GPM, 60 PSIVersiJet Series pump is engineered for applications such as liquid transfer, spraying, cooling, circulation, filtration, and dispensing. Each pump is constructed with a glass-filled polypropylene upper housing, coated motor, co-molded Santoprene diaphragm, and EPDM check valves and seals to maximize durability and service life. The integrated pressure switch ensures automatic operation, while the self-priming design allows for up to 8 feet of dry lift. VersiJet pumps can run dry without damage, and their quiet, smooth performance minimizes disruptions in busy work areas. Quick-connect ports streamline installation and maintenance, so operators can attach or remove hoses and fittings quickly without tools for fast pump swaps or service. It delivers up to 4 GPM and handles a maximum pressure of 60 PSI. This pump is self-priming up to 8 feet, and it includes a built-in pressure switch that automatically shuts off the pump when system pressure reaches 60 PSI. Upgrade your pumping system today and keep your operation flowing without interruptions!Benefits: Self-Priming: Draws liquid efficiently with up to 8 feet (2.4 meters) of dry prime, allowing the pump to pull fluid from the source without manual priming. Runs Dry Without Damage: Designed to operate safely even when the fluid supply is interrupted, meaning the pump will not suffer internal damage if left running without liquid, giving operators added protection from accidental dry runs and helping prevent costly downtime. Integrated Excessive Pressure Protection: A pressure switch shuts off the pump automatically when system pressure reaches 60 PSI. This feature helps prevent over-pressurization, protecting downstream equipment and extending pump life by minimizing unnecessary wear. Quiet, Efficient Operation: Reduces noise and energy usage through a four-chamber diaphragm design and noise-dampening baseplate. Reliable Performance: Designed for industrial fluid transfer and spraying in harsh environments. Long-Lasting Chemical-Resistant Construction: Features glass-filled polypropylene housing and EPDM seals for enhanced chemical resistance and durability. Easy Installation: Quick-connect fittings speed up maintenance and replacement. Applications: Liquid Transfer Spraying Cooling, Circulation Filtration Dispensing Specifications: Model: Q40FF-118S-2P Open Flow Rate: 4 GPM (15 LPM) Pressure Switch Cut Off: 60 PSI (4.1 BAR) Max Operating Pressure: 60 PSI (4.1 BAR) Max Inlet Pressure: 30 PSI (2.2 BAR) Self-Priming Capability: Up to 8 ft (2.4 m) Run-Dry Capable: Yes Nominal Voltage: 115 VAC Voltage Range: 104–126 VAC Max Current Draw: 1.3 Amps @ 60 PSI Leads: 14" (355mm) 18 AWG Wire Connection: Stripped Wire Duty Cycle: Intermittent Port Fittings: 2 x 3/4" (19 mm) straight hosebarb Fluid Temperature Range: 32ºF – 140ºF (0ºC – 60ºC) Internal Bypass: Yes Self-Priming Capability: Up to 8ft (2.4m) Dry Prime Run-Dry Capable: Yes Upper Housing: Glass-Filled Polypropylene Lower Housing: Cast Aluminum Diaphragm: Santoprene Check Valve Retainer: Polypropylene Pump Head: Seals: EPDM, Fasteners: Stainless Steel Baseplate: Nylon Rubber Feet Dimensions: 11.25 x 5.47 x 5.07 in (286 x 139 x 129 mm) Weight: 5.2 lbs (2.4 kg) Mounting: Horizontal (preferred) or vertical with the pump head down Certifications: UR listed; IPX6 rated Replaces Flojet Models; 04300042A, 04300043A

Read more less

Weather SealLength: 10'Height: 3/8"Width: 5/8"Color: BlackTACO Metals supplies quality weather seal that is designed to protect boat interiors and exteriors from the harsh marine environment. Well suited for live-wells, exterior doors, instrument covers and electronic boxes. TACO weather seal products are made of specially formulated rubber compounds, designed and engineered to provide maximum sealing capacity and protect against weathering and vibration. Absorbs shock and reduces vibration Offers superior resistance to water absorption, sunlight and extreme temperatures Durable EDPM synthetic rubber compound Ideal for live-wells, exterior doors, instrument covers and electronic boxes Adhesive backing for convenient installation This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Titan Grip Suction MountMeet the RAILBLAZA Titan Grip Suction Mount—because not every mount needs to leave a mark. Designed for when you want serious hold without busting out the drill, this beast sticks like a barnacle to any smooth surface: windshields, dashboards, glossy kayaks, you name it. The heavy-duty suction cup clamps down with a vengeance, giving your rod holder, camera, or drink caddy the stability of a mounted base—without the commitment. Ideal for rental fleets, glass windscreens, or rig-it-your-way setups, the Titan Grip gives you fast, secure, and totally non-invasive mounting. Paired with RAILBLAZA’s StarPort platform, it’s compatible with over 40 accessories—so whether you’re filming a session, trolling for snapper, or just holding your coffee, this mount sticks with you. And when you’re done? Pop it off, pack it up, and your gear goes with you—no holes, no fuss.HEAVY-DUTY SUCTION POWER - The 3.75" diameter suction cup provides a rock-solid hold on smooth surfaces, ensuring your equipment stays exactly where you need it. The Titan Suction Mount has proven to handle the extremes. Whether you're off-roading or out on the open sea, your gear remains secure.INNOVATIVE LOCKING MECHANISM - Engage the locking suction to secure the mount firmly. Trust in the Titan to stand strong, even in the roughest conditions.UNIVERSAL COMPATIBILITY - Pair it with any RAILBLAZA StarPort accessory. Whether it's a camera mount, rod holder, drink holder, or fillet table, the Titan has got you covered. Its sleek, efficient design not only looks good but performs even better.MYRAID OF USES - The Titan Grip Suction Mount is perfect for adventurers who need their gear to keep up with them. From capturing your best fishing moments to keeping your drink within arm’s reach, this mount does it all. Rod holder, cup holder, phone mount, or any of the many StarPort accessories.   Features: Marine or overland suction mount Quick and easy tool-free removal offers security for your equipment Tested in both overland and marine environments. Innovative design Mounts to any flat surface

Read more less