Multi-Surface Cleaner - 1 Gallon303 Multi-Surface Cleaner quickly removes even the most stubborn spots from coffee, oil, grease and ink from virtually any material or surface. This all-in-one cleaning solution can be used on everything from vehicle interiors to RV awnings to car covers. Safe to use anywhere in your car, motor home or other places where vinyl, fabrics and surfaces are in need of an intensive cleaning. Features:
Effective surface cleaning stain removing formula
All in one cleaner with ultimate cleaning power with no greasy residue
Leaves surfaces looking new with no streaks left behind
Designed for all water-safe materials
Made in the U.S.A.
*Sold as an Individual WARNING: This product can expose you to chemicals including 1, 4-Dioxane,Ethylbenzene which are known to the State of California to cause cancer, and di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Type: All Purpose
Box Dimensions: 5"H x 7"W x 10"L WT: 9 lbs
UPC: 082043005709
Fogging Oil - 12oz *Case of 6*STA- BIL Fogging Oil is an aerosol propelled oil treatment to protect internal engine components during storage. This fogging oil can be sprayed to coat internal engine components and prevent corrosion. Formulated to displace moisture from metal to protect engine, this product also lubricates the cylinder’s walls, pistons and rings to prevent damage (scuffing) during start-up after prolonged engine storage. It is used in all two and four cycle gasoline engines. The STA-BIL Fogging Oil comes in a convenient 12 ounce aerosol can with nozzle straw to direct oil in tight passages or through spark plug holes in head and cylinder.USAGE DIRECTIONS:
Start engine and remove air filter.
Spray fogging oil into air intakes of running engine.
Shut engine off after 10 seconds.
Remove spark plugs.
Attach extension tube and spray fogging oil into each cylinder for 3 seconds.
Replace spark plugs.
Features:
STA-BIL Fogging oil coats internal engine components to prevent corrosion
Displaces moisture from metal to protect engine
Lubricates cylinders to prevent cylinder damage (scuffing) at start up
For all 2-cycle and 4-cycle gasoline engines, including outboard, marine, small internal combustion & automotive engines
Made in the U.S.A.
Specifications:
Type: Engine & Fuel
Box Dimensions: 3"H x 3"W x 8"L WT: 5.7 lbs
Ceramic GWash - 500mlCeramic GWash is a super-concentrated car wash soap that delivers exceptional cleaning power while leaving behind a durable, hydrophobic layer. Our ceramic wash lifts and captures dirt particles from your car’s paint, minimizing the risk of swirl marks during the wash process while adding ceramic protection with every use.The advanced low-suds, high-lubrication formula safely removes dirt, bird droppings, and road grime from exterior surfaces without stripping existing protection. Ceramic GWash creates a water-beading effect that keeps your vehicle looking cleaner between washes. Formulated for automotive clear coats, this ceramic wash soap lifts contaminants with minimal effort and rinses clean without leaving residue behind.Features:
Extreme Dirt Repellency
Up to 3 months protection
Safe for matte and satin finishes
Simple Steps To Help You Get The Best Results:
Shake well before use
Use out of direct sunlight and on a cold surface
Add 20ml per 10L into an empty bucket and fill with cold water
Use with a wash mitt and the two-bucket method for best results
Always begin washing the upper surfaces of your car and work downwards
After use, rinse your car thoroughly with cold, clean water to remove all surfactants
Dry using a microfiber towel
Store in a cool, dry place
Use within 12 months of opening
Ceramic GWash - 1 LiterCeramic GWash is a super-concentrated car wash soap that delivers exceptional cleaning power while leaving behind a durable, hydrophobic layer. Our ceramic wash lifts and captures dirt particles from your car’s paint, minimizing the risk of swirl marks during the wash process while adding ceramic protection with every use.The advanced low-suds, high-lubrication formula safely removes dirt, bird droppings, and road grime from exterior surfaces without stripping existing protection. Ceramic GWash creates a water-beading effect that keeps your vehicle looking cleaner between washes. Formulated for automotive clear coats, this ceramic wash soap lifts contaminants with minimal effort and rinses clean without leaving residue behind.Features:
Extreme Dirt Repellency
Up to 3 months protection
Safe for matte and satin finishes
Simple Steps To Help You Get The Best Results:
Shake well before use
Use out of direct sunlight and on a cold surface
Add 20ml per 10L into an empty bucket and fill with cold water
Use with a wash mitt and the two-bucket method for best results
Always begin washing the upper surfaces of your car and work downwards
After use, rinse your car thoroughly with cold, clean water to remove all surfactants
Dry using a microfiber towel
Store in a cool, dry place
Use within 12 months of opening
W6 Iron Removing Wheel & Paint Cleaner - 1 LiterW6 Iron Removing Wheel & Paint Cleaner provides lasting protection for automobiles, boats, and bikes. Our unique formulas can significantly enhance the appearance and performance of your vehicles. This iron removal product delivers long-lasting results and is great for vehicle decontamination. Even on stubborn iron particles, W6 does not damage coatings and works efficiently on paint and wheels.W6 is formulated to offer the safest and most effective method of vehicle decontamination of substances commonly found on your vehicle’s paintwork and rims. It also acts as a rim, trim, and wheel cleaner with corrosion inhibitors and additives designed to combat the effects of acid rain and stubborn iron particles.This iron decon and car detailing product for cars features a thick gel-like formula that clings to vertical surfaces, efficiently degreasing them. If you need a product that protects from UV and maintains car looks, try C2 Ceramic Sealant, a ceramic spray made to leave a perfect finish.Uniquely Crafted FormulaOur team takes pride in offering uniquely designed products that outperform others on the market today, and the W6 Iron Removing Wheel & Paint Cleaner is no exception. This product extends the life of your machine and boosts performance, whether applied to painted surfaces or directly onto rims.Gtechniq leverages advanced technology to create products that enhance the quality and value of your vehicles. We offer a wide range of products to protect bikes, cars, and boats for improved performance. When you need an effective product for wheels, iron deposits, brake dust, and more, choose our W6 Iron Removing Wheel & Paint Cleaner.Simple Steps To Help You Get The Best ResultsUsing a new product on your vehicle may cause some hesitation, and our team understands that. At Gtechniq, we make the application process simple and effective. To get the best results from W6 Iron Removing Wheel & Paint Cleaner, follow these steps:
Use in a well-ventilated area, out of direct sunlight
Remove loose dirt using a hose or jet wash
Shake bottle well and wear gloves
Spray the W6 Iron Removing Wheel & Paint Cleaner directly onto the car’s surface and leave to dwell for 3-5 minutes; during this time, ferrous particles will dissolve, forming a purple solution
Do not allow the product to dry on the surface
Rinse residue and repeat if necessary
Where the surface is heavily soiled, you can agitate W6 with an MF1 ZeroR Microfibre Buff Cloth or a suitable soft-bristled brush
Store in a cool, dry place
Use within 12 months of opening
Follow these steps for the best results for your vehicle. W6 won’t damage your coating or leave a residue on the surface.
W5 Citrus All-Purpose Cleaner - 1 LiterDitch the clutter of multiple cleaners and upgrade to W5 Citrus All Purpose Cleaner—the perfect solution for tackling dirt, grease, and stains on interior and exterior surfaces. Whether you’re deep cleaning your engine bay or removing road grime from fender wells, W5 is engineered to handle it all with superior foaming action.Unlike traditional all-purpose cleaners, W5 Citrus is a safer choice with a concentrated formula that can be adjusted for light cleaning or heavy-duty cleaning. Use full strength on stubborn brake dust or stubborn dirt, or dilute up to 10:1 (10 parts water, 1 part product) for general cleaning on door panels, vinyl, and floor mats. For professional detailers and car enthusiasts alike, W5’s versatile cleaner is safe on delicate surfaces, won’t degrade coatings, and leaves no sticky residue. Pair with a microfiber cloth, applicator pad, or spray bottle for a streak-free finish that enhances the look of your vehicle surfaces.Simple Steps To Help You Get The Best Results:
Shake well before use and wear gloves
Use neat for heavy soiling, 5:1 for general cleaning tasks, and up to 10 parts water to one part product for light soiling
Spray directly onto the surface and leave to dwell for 3-5 minutes
Rinse residue with water and repeat if necessary. In extreme cases, agitate the surface with an MF1 ZeroR Microfibre Buff Cloth or soft-bristled brush
Store in a cool, dry place
Use within 12 months of opening
GWash - 500MLGWash is a pH-neutral car shampoo formulated for regular maintenance on vehicles with ceramic coating, wax, or sealant protection. The concentrated formula generates thick foam that lifts dirt particles, road grime, and traffic film from your paint without stripping protective coatings.Fully biodegradable, this car wash shampoo lubricates dirt and grime during the wash process, minimizing swirl marks and maximizing gloss retention. The high-foaming shampoo solution works with the bucket method to deliver a thorough cleaning that keeps your vehicle looking new between professional details. Safe for all exterior paint and protective coatings.Simple Steps To Get The Best Results:
Shake the bottle well before use
Avoid application in direct sunlight
For light soiling, add two caps (20ml) of GWash to a 5-gallon wash bucket. For heavy soiling, use four caps (40ml)
Fill the bucket with warm water to activate the foam
Wash the car starting at the top and work your way down. Use a wash mitt when washing to avoid swirl marks
Rinse thoroughly with clean water to remove all soap and residue
Store in a cool, dry place
Use within 12 months of opening
W8 Bug Remover - 250mlW8 Bug Remover is formulated to eliminate bug splatter from your front bumper and other exterior surfaces without compromising your clear coat or ceramic coating. Bugs are naturally acidic, and when they decompose, they release enzymes that accelerate paint corrosion. If left untreated, bug residue and baked-on bug guts can cause permanent damage to your vehicle’s paintwork.Unlike traditional bug removers that rely on harsh chemicals, W8 is a paint-safe insect remover designed to break down bug guts safely and efficiently while preserving painted surfaces. The formula works on automotive surfaces, including plastic trim, plastic surfaces, and glass, without stripping protective coatings. Simple Steps To Help You Get The Best Results:
Shake the spray bottle well before use and wear gloves
Use out of direct sunlight on a cool surface
Spray W8 onto bug splatter and allow to dwell for 3-5 minutes, but do not let it dry
Rinse and repeat if necessary
For stubborn spots, agitate the surface with an MF1 ZeroR Microfibre Buff Cloth or a dedicated bug sponge
Store in a cool, dry place
HALOv2 Flexible Film Coating - 30mlHALOv2 chemically bonds to your car’s surface, forming an ultra-dense, protective layer that enhances the performance of paint protection film (PPF) and vinyl. It improves dirt and water repellency while reducing the risk of UV damage, ensuring your vehicle remains protected from daily wear and tear. HALOv2 defends against road debris, bird droppings, and UV rays, and its low surface energy allows dirt, water, and grime to slide off effortlessly.Whether you’ve applied a clear bra to your front bumper, full PPF to your full body, or protective film to your hood and headlights, HALOv2’s flexible formula ensures compatibility with all finishes—gloss, satin, or matte—without compromising the self-healing properties of advanced PPFs. It’s made to prevent minor scratches, swirl marks, and the buildup of grime. Use it on hoods, front fenders, headlights, or the entire car to maintain a factory-new appearance while making regular cleaning easier. For best results, consult a certified installer to ensure flawless application.Features:
Single Layer Application
Lasts up to two years on PPF and vinyl
Makes surface easier to maintain
Can be used on gloss, satin, and matte finishes
Box Contains:
30ml HALOv2 Flexible Film Coating
A pair of nitrile gloves
AP2 Ultra Soft Foam Filled Applicator
Master Instruction Leaflet
Gtechniq window sticker
Simple steps to help you get the best results:
Shake bottle well and wear gloves
To apply HALOv2, your vehicle must be indoors and remain indoors for at least 12 hours after the coating has been applied. For best results, good lighting is essential
If applying to previously installed film, wash and decontaminate the vehicle with Gtechniq W5 Citrus All Purpose Cleaner and W6 Iron and General Fallout Remover
Spray a 30% dilution of isopropyl alcohol (IPA) onto a Gtechniq MF1 ZeroR Microfibre Buff Cloth
With your surface fully cooled, buff to remove any fingerprints or other surface contaminants. This process ensures you get the maximum number of chemical bonds between HALOv2 and the film or vinyl
Apply HALOv2 evenly on the application pad and set the bottle aside
Apply with the applicator provided in overlapping strokes to an area roughly 2’x2′, or work to the body lines of the vehicle
After coating a panel, remove residue with an MF1 cloth. Always remove from further than you have applied, working from the outside in
Once applied, carry out a final check with an MF1 cloth and a bright but diffused light source – this will ensure no residue remains on the surface.
An unopened bottle of HALOv2 has a 12-month shelf life from the time of purchase
Store in a cool/dry place, out of direct sunlight
Use within 3 months of opening
PPF & Vinyl Maintenance KitThis comprehensive kit includes all the chemicals and accessories you need to safely and effectively clean and protect your vehicle’s paint protection film (PPF) and vinyl. With this kit, you can easily remove stubborn dirt, grime, and bugs without damaging the delicate surface of your PPF or vinyl.Kit Contains:
500ml W1 Gwash
500ml W5 Citrus All Purpose Cleaner
500ml W8 Bug Remover
500ml C2 Ceramic Sealant
WM2 Microfibre Wash Mitt
MF2 Drying Towel
W4v2 Citrus Foam - 1 LiterSustainability should enhance performance, not compromise it. W4 Citrus Foam v2 proves exactly that. Formulated with renewable, plant-based surfactants in place of traditional petrochemical alternatives, W4 Citrus Foam v2 delivers richer foam, greater cleaning power, and exceptional safety across all exterior vehicle surfaces.Better for the environment. Better cleaning.Simple Steps To Help You Get The Best Results:
Shake well before use
Use out of direct sunlight on a cool vehicle surface
For best results, dilute W4 Citrus Foam using a 10 parts water to 1 part solution ratio in your foam cannon or foam gun
Apply snow foam evenly across all exterior surfaces and allow to dwell for 3-5 minutes
Do not allow the foam to dry on the vehicle’s surface
Rinse off with clean water using a hose or pressure washer
For tougher grime in wheel wells, engine bay, or hard-to-reach areas, use a wash mitt or microfiber towel for added agitation
Follow up with a contact wash using G Wash in a wash bucket for a complete wash process
Store in a cool, dry place
C4 Permanent Trim Restorer - 30mlC4 Permanent Trim Restorer brings faded exterior trim back to like-new condition. Exposure to UV rays, road grime, and weather conditions can leave black plastic trim looking gray and chalky. Our plastic trim restorer bonds to the plastic surface at a molecular level, restoring the original color while providing long-lasting protection.Unlike typical trim dressing or black plastic restorer products that leave behind a greasy residue, C4 provides a natural finish with no oily buildup. It works across a wide range of exterior plastics, including rear bumper trim, front bumper accents, door handles, fender flares, license plate surrounds, and textured rubber surfaces.Features:
Up to 2 years of durability
Restores trim to ‘as new’ condition
For use on all exterior trim
Simple Steps To Help You Get The Best Results:
Make sure you have enough product for all of your trim; an SUV (30ml) requires more than a small sedan (15ml)
Work in a well-ventilated area at a temperature above 5°C (41°F) on a cool surface out of direct sunlight; wear the gloves provided
Ensure the plastic surface is free from contaminants; for best results, clean trim with a neat solution of W5 Citrus All Purpose Cleaner and a medium-stiff brush to remove old dressings
Use the AP1 Lint-free Applicator supplied to spread the coating onto each trim piece; soak the applicator pad with a small amount of product
Once you have spread the product over each piece of trim, gently wipe away residue immediately with an MF1 ZeroR Microfibre Buff Cloth
If your car has heavily textured trim, take time to ensure all crevices are covered and that all residue is removed
Allow the coating to cure for 12 hours before exposing to the elements
For enhanced durability, apply a second coat after the first has cured
Use within 3 months of opening
Store in a cool, dry place