Automotive/RV - Cleaning

W7 Tar & Glue Remover - 500mlW7 Tar and Glue Remover is a powerful, solvent-based cleaner designed to remove tough spots like road tar, asphalt, and tree sap from your vehicle’s surface. Safe for Gtechniq-coated and non-coated cars, it dissolves stubborn stains without harming paint or clear coats.From sticker residue on your rear bumper to road tar on your front bumper, W7 tackles exterior messes quickly and safely. While many people reach for harsh chemicals like acetone or abrasive tools, those can damage your vehicle’s paint or clear coat. W7, however, safely dissolves these stains without the risk of paint damage, making it the best option for anyone looking to maintain their vehicle’s aesthetic value.Simple steps to help you get the best results: Shake the bottle well before use and wear gloves Use out of direct sunlight Spray product onto a MF1 ZeroR Microfibre Buff Cloth and gently wipe the affected area Allow to dwell for 1-2 minutes Rinse and repeat if necessary Store in a cool, dry place Use within 12 months of opening IMPORTANT: Do not allow W7 to come into contact with plastics, decals, rubber or vinyl – wipe any overspray immediately. It is not suitable for use on PPF, smart repairs or wrapped vehicles.

Read more less

Ultimate Protection Kit - 50mlCrystal Serum Light (CSL) has the best possible swirl and chemical resistance for a prosumer-grade product with substantially higher gloss than previous tech ceramic coatings.EXOv5 is outstanding for water and dirt repellency plus adds further gloss to your vehicle’s finish.Panel Wipe is in a class of its own for removing polish and other residues, ensuring that CSL bonds perfectly to your paint.Features:This is the ultimate protection kit aimed at the experienced detailer.Kit Contains: 250ml Panel Wipe 50ml Crystal Serum Light 50ml EXO Ultra Durable Hydrophobic Coating

Read more less

W8 Bug Remover - 1 LiterW8 Bug Remover is formulated to eliminate bug splatter from your front bumper and other exterior surfaces without compromising your clear coat or ceramic coating. Bugs are naturally acidic, and when they decompose, they release enzymes that accelerate paint corrosion. If left untreated, bug residue and baked-on bug guts can cause permanent damage to your vehicle’s paintwork.Unlike traditional bug removers that rely on harsh chemicals, W8 is a paint-safe insect remover designed to break down bug guts safely and efficiently while preserving painted surfaces. The formula works on automotive surfaces, including plastic trim, plastic surfaces, and glass, without stripping protective coatings. Simple Steps To Help You Get The Best Results: Shake the spray bottle well before use and wear gloves Use out of direct sunlight on a cool surface Spray W8 onto bug splatter and allow to dwell for 3-5 minutes, but do not let it dry Rinse and repeat if necessary For stubborn spots, agitate the surface with an MF1 ZeroR Microfibre Buff Cloth or a dedicated bug sponge Store in a cool, dry place

Read more less

PWv2 Panel Wipe - 500mlPanel Wipe V2 is designed to remove all polish residues so that chemically bonding coatings can form the maximum number of bonds with your vehicle’s paintwork.PWv2 is specifically designed for modern-day top coats. Safe to use on softer paints (Japanese and GM) and does not mar the surface.PW is a blend of pure alcohols and solvents formulated to remove and dissolve polish residues and then flash off to leave a 100% decontaminated surface.Features: Removes all polish residue Promotes bonding Fragrance- and color-free Simple steps to help you get the best results: Allow surfaces to cool before use Shake well and wear gloves Spray onto a MF1 ZeroR Microfibre Buff Cloth and then wipe onto the surface To make sure the surface is residue-free, over-wipe with a dry MF1 Not suitable for use on PPF, vinyl, plastic or rubber. Avoid use on smart repairs or resprays We recommend testing Panel Wipe on a small area of paintwork before use, to make sure it is compatible. To effectively remove polish residues, this product contains a high volume of hydrocarbons which will not affect original paintwork, but can tarnish smart repairs or resprays Store in a cool, dry place Use within 2 months of opening

Read more less

GWash - 1LiterGWash is a pH-neutral car shampoo formulated for regular maintenance on vehicles with ceramic coating, wax, or sealant protection. The concentrated formula generates thick foam that lifts dirt particles, road grime, and traffic film from your paint without stripping protective coatings.Fully biodegradable, this car wash shampoo lubricates dirt and grime during the wash process, minimizing swirl marks and maximizing gloss retention. The high-foaming shampoo solution works with the bucket method to deliver a thorough cleaning that keeps your vehicle looking new between professional details. Safe for all exterior paint and protective coatings.Simple Steps To Get The Best Results: Shake the bottle well before use Avoid application in direct sunlight For light soiling, add two caps (20ml) of GWash to a 5-gallon wash bucket. For heavy soiling, use four caps (40ml) Fill the bucket with warm water to activate the foam Wash the car starting at the top and work your way down. Use a wash mitt when washing to avoid swirl marks Rinse thoroughly with clean water to remove all soap and residue Store in a cool, dry place Use within 12 months of opening

Read more less

W6 Iron Removing Wheel & Paint Cleaner - 500mlW6 Iron Removing Wheel & Paint Cleaner provides lasting protection for automobiles, boats, and bikes. Our unique formulas can significantly enhance the appearance and performance of your vehicles. This iron removal product delivers long-lasting results and is great for vehicle decontamination. Even on stubborn iron particles, W6 does not damage coatings and works efficiently on paint and wheels.W6 is formulated to offer the safest and most effective method of vehicle decontamination of substances commonly found on your vehicle’s paintwork and rims. It also acts as a rim, trim, and wheel cleaner with corrosion inhibitors and additives designed to combat the effects of acid rain and stubborn iron particles.This iron decon and car detailing product for cars features a thick gel-like formula that clings to vertical surfaces, efficiently degreasing them. If you need a product that protects from UV and maintains car looks, try C2 Ceramic Sealant, a ceramic spray made to leave a perfect finish.Uniquely Crafted FormulaOur team takes pride in offering uniquely designed products that outperform others on the market today, and the W6 Iron Removing Wheel & Paint Cleaner is no exception. This product extends the life of your machine and boosts performance, whether applied to painted surfaces or directly onto rims.Gtechniq leverages advanced technology to create products that enhance the quality and value of your vehicles. We offer a wide range of products to protect bikes, cars, and boats for improved performance. When you need an effective product for wheels, iron deposits, brake dust, and more, choose our W6 Iron Removing Wheel & Paint Cleaner.Simple Steps To Help You Get The Best ResultsUsing a new product on your vehicle may cause some hesitation, and our team understands that. At Gtechniq, we make the application process simple and effective. To get the best results from W6 Iron Removing Wheel & Paint Cleaner, follow these steps: Use in a well-ventilated area, out of direct sunlight Remove loose dirt using a hose or jet wash Shake bottle well and wear gloves Spray the W6 Iron Removing Wheel & Paint Cleaner directly onto the car’s surface and leave to dwell for 3-5 minutes; during this time, ferrous particles will dissolve, forming a purple solution Do not allow the product to dry on the surface Rinse residue and repeat if necessary Where the surface is heavily soiled, you can agitate W6 with an MF1 ZeroR Microfibre Buff Cloth or a suitable soft-bristled brush Store in a cool, dry place Use within 12 months of opening Follow these steps for the best results for your vehicle. W6 won’t damage your coating or leave a residue on the surface.

Read more less

EXO & Crystal Serum Light - 30mlCrystal Serum Light is an outstanding standalone ceramic coating for gloss retention and exceptional scratch resistance, protecting your car’s paint from swirl marks and environmental damage. For car enthusiasts who want the best ceramic coat protection available, combining these two products is the answer.This kit combines Crystal Serum Light’s protection and chemical resistance with EXOv5’s extreme hydrophobic properties, giving your vehicle a high-gloss finish that repels water, bird droppings, and contaminants. It’s ideal for daily drivers and show cars alike. Whether you’re shielding factory paint on a new vehicle or restoring your previous car after paint correction, this combination creates a durable sacrificial layer that makes maintenance washes effortless while preserving your clear coat for years.Crystal Serum Light Chemical resistance from a prosumer-grade product Incredible gloss Up to 5 years durability EXOv5 Ultra Durable Coating Improved durability Same great gloss, water and dirt repellency Significantly easier to apply Simple steps to help you get the best results:Using a new product on your vehicle may cause some hesitation, and our team understands that. However, at Gtechniq, we make the application process simple and effective. To get the best results from Crystal Serum Light, follow these steps: To apply Crystal Serum Light (CSL), make sure your vehicle is indoors and can stay indoors for 12 hours after application. Do not apply in direct sunlight. Only apply the product at a temperature between 5°C and 25°C. Shake well and wear gloves. Wash and decontaminate your paintwork thoroughly before application. If required, polish your paintwork, either by machine or hand, to remove any imperfections. Spray Panel Wipe into a Gtechniq MF1 Microfibre Cloth and wipe down each panel in small sections. Soak the application pad with 3 full measures of CSL from the pipette and work the liquid into the pad to get an even saturation. Replace the lid on the bottle and set aside – do not keep the bottle in your hand as this promotes premature curing. Apply in overlapping strokes to an area roughly 2ft by 2ft, or work to the body lines of the vehicle. Immediately remove residue with an MF1 cloth – you may need to buff the same area several times, but avoid doing it with too much force. We recommend the use of 2 cloths at any one time. Make sure the cloths are rotated during residue removal to prevent CSL curing in the cloth – this can make buffing residue difficult. Inspect the surface for residue with a bright, diffused light source. If you remove residue and it cures fully, you should polish the area and reapply CSL. As soon as you finish, put your MF1 cloths in water, wash, and dry them as soon as possible. Wait approximately 2 hours after applying CSL before applying EXO Ultra Durable Hydrophobic Coating or C2 Liquid Crystal. Store in a cool, dry place. Use within 3 months of opening.

Read more less

I2 Tri-Clean - 1 LiterThe I2 Tri-Clean is an all-surface interior car cleaning solution that cleans and kills 99.9% of bacteria. Developed in conjunction with antibacterial and antimicrobial technologies, this interior surface cleaner effectively purifies and refreshes every part of your car’s interior, including seats, dashboards, door panels, carpets, floor mats, and upholstery. It not only cleans but actively reduces the number of microbes, providing a thorough cleaning and ensuring your vehicle’s surfaces remain hygienically clean.Additionally, the I2 Tri-Clean features a unique odor absorber that tackles and eliminates unpleasant smells rather than masking them. This formula avoids leaving behind any sticky residues that attract further dirt and grime, maintaining a clean, pleasant scent and a pristine, non-porous surface throughout your car.Features: Kills 99.9% of bacteria Strong cleaning power Absorbs odours Simple Cleaning Process To Help You Get The Best Results Out Of This Car Interior Cleaning Product: Shake the spray bottle well before use and wear protective gloves Apply the solution directly onto a damp MF1 ZeroR Microfibre Buff Cloth Wipe over the surface gently, agitating. For stubborn stains, repeat the process if necessary Wipe the surface with a clean microfiber cloth to ensure the surface is dry Store your I2 Tri-Clean in a cool, dry place Use within 12 months of opening

Read more less

W6 Iron Removing Wheel & Paint Cleaner - 250mlW6 Iron Removing Wheel & Paint Cleaner provides lasting protection for automobiles, boats, and bikes. Our unique formulas can significantly enhance the appearance and performance of your vehicles. This iron removal product delivers long-lasting results and is great for vehicle decontamination. Even on stubborn iron particles, W6 does not damage coatings and works efficiently on paint and wheels.W6 is formulated to offer the safest and most effective method of vehicle decontamination of substances commonly found on your vehicle’s paintwork and rims. It also acts as a rim, trim, and wheel cleaner with corrosion inhibitors and additives designed to combat the effects of acid rain and stubborn iron particles.This iron decon and car detailing product for cars features a thick gel-like formula that clings to vertical surfaces, efficiently degreasing them. If you need a product that protects from UV and maintains car looks, try C2 Ceramic Sealant, a ceramic spray made to leave a perfect finish.Uniquely Crafted FormulaOur team takes pride in offering uniquely designed products that outperform others on the market today, and the W6 Iron Removing Wheel & Paint Cleaner is no exception. This product extends the life of your machine and boosts performance, whether applied to painted surfaces or directly onto rims.Gtechniq leverages advanced technology to create products that enhance the quality and value of your vehicles. We offer a wide range of products to protect bikes, cars, and boats for improved performance. When you need an effective product for wheels, iron deposits, brake dust, and more, choose our W6 Iron Removing Wheel & Paint Cleaner.Simple Steps To Help You Get The Best Results:Using a new product on your vehicle may cause some hesitation, and our team understands that. At Gtechniq, we make the application process simple and effective. To get the best results from W6 Iron Removing Wheel & Paint Cleaner, follow these steps: Use in a well-ventilated area, out of direct sunlight Remove loose dirt using a hose or jet wash Shake bottle well and wear gloves Spray the W6 Iron Removing Wheel & Paint Cleaner directly onto the car’s surface and leave to dwell for 3-5 minutes; during this time, ferrous particles will dissolve, forming a purple solution Do not allow the product to dry on the surface Rinse residue and repeat if necessary Where the surface is heavily soiled, you can agitate W6 with an MF1 ZeroR Microfibre Buff Cloth or a suitable soft-bristled brush Store in a cool, dry place Use within 12 months of opening Follow these steps for the best results for your vehicle. W6 won’t damage your coating or leave a residue on the surface.

Read more less

Leather Care KitThe Leather Care Kit includes everything you need to clean and protect the leather interior in your vehicle. This kit pairs L2 Leather Cleaner to safely remove dirt, body oils, and grime from automotive leather with L1 Leather Guard AB for long-lasting protection against UV rays, dye transfer, and wear.Modern leather car seats are treated with synthetic finishes that do not absorb traditional leather conditioner or conditioning products the way leather furniture might. This kit is formulated specifically for automotive leather, working with the leather surface rather than against it. Regular care with the right leather cleaner and protectant keeps your leather seats, steering wheel, and leather upholstery looking new while preventing cracking and fading.Kit Contains: 200ml L2 Foaming Leather Cleaner 100ml L1 Leather Guard 1 x Leather & Interior Brush 2 x MF1 ZeroR Microfibre Buff Cloth 1 x AP3 Soft Foam Applicator Pad Simple Steps To Help You Get The Best Results:Step 1: Clean Leather Shake L2 Leather Cleaner well before use Spray directly onto the leather surface or onto the included microfiber buff cloth Use the leather and interior brush to gently agitate and lift dirt, body oils, and grime from the pores of the leather Wipe away residue with the microfiber buff cloth and allow to dry Step 2: Protect Leather Apply a small amount of L1 Leather Guard AB to the included applicator pad Spread evenly across leather seats, steering wheel, and door panels in a circular motion Remove any excess with the microfiber buff cloth For high-wear areas like the driver’s seat, apply a second coat after one hour Allow to cure for one hour before use

Read more less

Quick Detailer V2 - 500mlQuick Detailer is a versatile spray product designed for car enthusiasts and DIY detailers who want a streak-free finish without the time commitment of a full wash. Whether you’re tackling light dust after a drive or refreshing your vehicle’s exterior between washes, this spray-on wax formula delivers instant gloss, protection, and shine.Perfect for removing road film, light dust, and fingerprints, Quick Detailer works seamlessly on painted surfaces, glass, and wheels, giving your car a just-washed look without the need for a hose or drying aid. It’s ideal for professional detailers and DIY enthusiasts who need a fast and efficient way to clean, protect, and maintain their vehicle’s exterior, leaving behind a smooth, hydrophobic layer that repels water and contaminants.Features: Easy to apply Works with all Gtechniq coatings Flawless, streak-free finish Simple steps to help you get the best results:We understand the importance of using car detailing products that come with simple and flawless applications. This can save you a lot of time with your car or vehicle maintenance routine. Here are some simple steps to follow that will deliver exceptional results: Shake well before use Spray onto the surface or directly onto an MF1 ZeroR Microfibre Buff Cloth; buff the surface with a clean MF1 Layer the product to further enhance gloss, slickness and durability Store in a cool, dry place Use within 12 months of opening

Read more less

Ultimate Protection Kit - 30mlCrystal Serum Light (CSL) has the best possible swirl and chemical resistance for a prosumer-grade product with substantially higher gloss than previous tech ceramic coatings.EXOv5 is outstanding for water and dirt repellency plus adds further gloss to your vehicle’s finish.Panel Wipe is in a class of its own for removing polish and other residues, ensuring that CSL bonds perfectly to your paint.Features:This is the ultimate protection kit aimed at the experienced detailer.Kit Contains: 250ml Panel Wipe 30ml Crystal Serum Light 30ml EXO Ultra Durable Hydrophobic Coating

Read more less