Combo Carbon Monoxide Propane Alarm - Flush Mount - Mini - BlackHave a safe TRIP!Test and inspect the Propane and CO alarms installed in your RV every week and replace malfunctioning alarms.Replace all Propane and CO alarms that are 5 years old or older.Install alarms listed for RV use.Prevent accidents by teaching family and friends about the operation of the alarms. Never ignore a sounding alarm.Features:
Double-Duty Alarm. Upgrades single 12 Volt Propane Gas alarms to a dual alarm that detects both Propane Gas and CO
Space Saving. Compact design for RV's
Designed for the Rugged RV Environment. Ideal for Class A Motor homes, Class B Van Campers, Class C Mini-Motor Homes, Travel Trailers, Fifth Wheels, Truck & Folding Campers
Advanced Technology. Alarm Mute button silences alarm while RV is ventilated. Rapid recovery sensor resets when silenced or reactivates alarm if dangerous levels of Propane or CO remain
Reliable. 12 Volt power means no missing or dead batteries to replace
Approved. Meets RVIA/NFPA requirements
Listed to UL 1484 RV and UL 2034 RV
Specifications:
Fume Type: Carbon Monoxide
Voltage - Input Range (Volts): 12v
Generator Shutdown: No
Box Dimensions: 2"H x 8"W x 10"L WT: 0.4 lbs
UPC: 715456257440
25 Series Flush Mount Dual Carbon Monoxide/Propane Alarm with Trim Ring - Black - 12V Hard WireThe Safe-T-Alert 25 Series combination CO/Gas Alarm combines a powerful, compact system that detects both Carbon Monoxide (CO) and explosive Propane (LPG) gas. The 25 Series uses the latest microprocessor technology, combined with two electronic self-cleaning sensors that operate independently. The combined unit can detect both CO and explosive gases simultaneously.This detector is listed as a CO and Propane gas detector for RV use. Other explosive gases, such as Acetone, Alcohol, Butane, and Gasoline, may cause false alarms.To prevent false alarms from brief “puffs” of gas, the detector has a recheck cycle before alarming. If high levels of gas remain during the recheck cycle, the detector will alarm.The electronic CO sensor in your SAFE-T-ALERT CO alarm is very sensitive to CO gas. It will not react to safe levels of most other gases.Features:
This unit comes with a trim ring to cover existing screw holes and fit newer units into previous installation cutouts.
Patented Double-Duty Alarm. Upgrades single 12 Volt Propane Gas alarms to a dual alarm that detects both Propane Gas and CO.
Space Saving. Compact design for RVs.
Designed for the Rugged RV Environment. Ideal for Class A Motor homes, Class B Van Campers, Class C Mini-Motor Homes, Travel Trailers, Fifth Wheels, Truck & Folding Campers.
Advanced Technology. The Alarm Mute button silences the alarm while the RV is ventilated. Rapid recovery sensor resets when silenced or reactivates the alarm if dangerous levels of Propane or CO remain.
Reliable. 12 Volt power means no missing or dead batteries to replace.
Approved. Meets RVIA/NFPA requirements.
Conforms to UL STD 2034 RV /1484 RV.
Specifications:
Conforms to UL STD 2034 RV /1484 RV
Power Supply & Current Draw: 108 mA @ 12 VDC
Operational Range: 12 Volts +/-15%
Low-voltage power warning
Operating Temperature: -40° F to +158° F
Unit Size with Trim Ring: 7″W x 4″H x 1.25″D
Cutout Size: 3.25″W x 2.5″H
Specifications:
Blower Relay: No
Fume Type: Carbon Monoxide
Generator Shutdown: No
Voltage - Input Range (Volts): 12
Box Dimensions: 2"H x 8"W x 10"L WT: 0.5 lbs
UPC: 715456257464
Owner's Manual (pdf)
Optical Smoke Detector with BaseOptical smoke detectors have consistently been recognized as suitable detectors for general use. They are regarded as particularly suitable for smoldering fires and escape routes. This smoke detector is also designed to significantly reduce the incidence of false alarms through over-sensitivity to transient phenomena.Features:
Recommended for use as general-purpose smoke detectors for early warning of fires in most areas
Works well in black as well as in white smoke
Compensation for slow changes in sensitivity
Extra confirmation of smoke before an alarm signal is given
Specifications:
Sampling Frequency: Once every four seconds
Operating Voltage: 8.5 V dc to 33 V dc
Supply Wiring: Two wire supply, polarity sensitive
Power-up Time: < 20 seconds
Minimum ‘Detector Active’ Voltage: 6 V
Minimum Holding Current: 8 mA
Minimum Voltage to Light Alarm LED: 5 V
Alarm Reset Time: One second
Alarm Indicator: Integral indicator with 360º visibility
Operating & Storage Temperature: -40ºC to +70ºC
Humidity (no condensation or icing): 0% to 98% RH
Operation:
Optical Smoke Detectors work on the well-established light scatter principle
The remarkable optical design of this Smoke Detector enables it to respond to a wide spectrum of fires
The sensing chamber contains an optical sensor that measures back-scattered light as well as the more usual forward-scattered light
The detector is calibrated so that it is highly reliable in detecting fires but is much less likely to generate false alarms
The stability of the detector-high reliability, low false alarm rate is further increased by the use of algorithms to decide when the detector should change to the alarm state
Removes the likelihood of a detector producing an alarm as a result of smoke from smoking materials or another non-fire source
Specifications:
Fume Type: Smoke
Box Dimensions: 2"H x 5"W x 7"L WT: 0.35 lbs
UPC: 619749321095
Fixed Heat Detector with BaseThe Fireboy-Xintex Heat Detector uses a single thermistor to sense the air temperature around the detector. This heat detector was designed to detect how fast the temperature is increasing.Features:
163°F Fixed Heat Detector
Housing: White flame-retardant polycarbonate
Terminals: Nickel-plated stainless steel
Ideal in environments that are dirty or smoky
Unaffected by wind or atmospheric pressure
Remote test feature
Specifications:
Detection Principle: Measurement of heat using a thermistor
Sampling Frequency: Once every four seconds
Supply Voltage: 8.5 V dc to 33 V dc
Supply Wiring: Two wire supply, polarity sensitive
Power-up Time: < 20 seconds
Minimum: ‘detector active’ voltage: 6 V
Holding Voltage: 5 V - 33 V
Minimum Holding Current: 8 mA
Minimum Voltage to Light Alarm LED: 5 V
Alarm Reset Voltage: < 1 V
Alarm Reset Time: One second
Alarm Indicator: Integral indicator with 360º visibility
Operating & Storage Temperature: -40ºC to +70ºC
Operation:
Open-web casing that enables air to flow freely across a thermistor which measures the air temperature every two seconds
A microprocessor stores the temperatures and compares them with pre-set values to determine whether a fixed upper limit - the alarm level - has been reached
Detectors the microprocessor uses algorithms to determine how fast the temperature is increasing
Gasoline Fume Detector - Chrome Bezel - 12/24VThe Single Channel Gasoline Fume Detector is an effective means to monitor gasoline fumes in an engine compartment, fuel tank storage area or in other areas where gasoline fumes might accumulate. Features:
Simple Installation
Audible and visual alarm to indicate LEL (Lower Explosive Level) presence
Monitors one (1) single area
Technical Specifications:
Operating Temperature: -40° to 185°F (-40° to 85°C)
Current Draw Nominal - 55mA
Current Draw Maximum - 95mA
Operating Voltage - 9 to 30V DC
Alarm Horn - 68 dB
Display Style - Round with Chrome Bezel
Display Dimensions - 2-3/16" (5.6 cm) round
Cutout Dimension - 2-1/16" (5.2 cm) round hole
In the Box:
Fume Detector
Fuel sensors x one (1)
20' Extension Cable x one (1)
Instruction manual
*Sold as an Individual Specifications:
Blower Relay: No
Fume Type: Gasoline
Generator Shutdown: No
Sensors Included: 1
Voltage - Input Range (Volts): 9 to 30
Box Dimensions: 4"H x 4"W x 8"L WT: 1 lbs
UPC: 619749202530
Owner's Manual (pdf)Brochure (pdf)
25 Series Flush Mount Dual Carbon Monoxide/Propane Alarm with Trim Ring - White - 12V Hard WireThe Safe-T-Alert 25 Series combination CO/Gas Alarm combines a powerful, compact system that detects both Carbon Monoxide (CO) and explosive Propane (LPG) gas. The 25 Series uses the latest microprocessor technology, combined with two electronic self-cleaning sensors that operate independently. The combined unit can detect both CO and explosive gases simultaneously.This detector is listed as a CO and Propane gas detector for RV use. Other explosive gases, such as Acetone, Alcohol, Butane, and Gasoline, may cause false alarms.To prevent false alarms from brief “puffs” of gas, the detector has a recheck cycle before alarming. If high levels of gas remain during the recheck cycle, the detector will alarm.The electronic CO sensor in your SAFE-T-ALERT CO alarm is very sensitive to CO gas. It will not react to safe levels of most other gases.Features:
This unit comes with a trim ring to cover existing screw holes and fit newer units into previous installation cutouts.
Patented Double-Duty Alarm. Upgrades single 12 Volt Propane Gas alarms to a dual alarm that detects both Propane Gas and CO.
Space Saving. Compact design for RVs.
Designed for the Rugged RV Environment. Ideal for Class A Motor homes, Class B Van Campers, Class C Mini-Motor Homes, Travel Trailers, Fifth Wheels, Truck & Folding Campers.
Advanced Technology. The Alarm Mute button silences the alarm while the RV is ventilated. Rapid recovery sensor resets when silenced or reactivates the alarm if dangerous levels of Propane or CO remain.
Reliable. 12 Volt power means no missing or dead batteries to replace.
Approved. Meets RVIA/NFPA requirements.
Conforms to UL STD 2034 RV /1484 RV.
Specifications:
Conforms to UL STD 2034 RV /1484 RV
Power Supply & Current Draw: 108 mA @ 12 VDC
Operational Range: 12 Volts +/-15%
Low-voltage power warning
Operating Temperature: -40° F to +158° F
Unit Size with Trim Ring: 7″W x 4″H x 1.25″D
Cutout Size: 3.25″W x 2.5″H
Specifications:
Blower Relay: No
Fume Type: Carbon Monoxide
Generator Shutdown: No
Voltage - Input Range (Volts): 12
Box Dimensions: 2"H x 8"W x 10"L WT: 0.5 lbs
UPC: 715456257457
Owner's Manual (pdf)
25 Series Surface Mount Dual Carbon Monoxide/Propane Alarm - 12V Hardwire - White The Safe-T-Alert 25 Series combination CO/Gas Alarm combines a powerful, compact system that detects both Carbon Monoxide (CO) and explosive Propane (LPG) gas. The 25 Series uses the latest microprocessor technology, combined with two electronic self-cleaning sensors that operate independently. The combined unit can detect both CO and explosive gases simultaneously.This detector is listed as a CO and Propane gas detector for RV use. Other explosive gases, such as Acetone, Alcohol, Butane, and Gasoline, may cause false alarms.To prevent false alarms from brief “puffs” of gas, the detector has a recheck cycle before alarming. If high levels of gas remain during the recheck cycle, the detector will alarm.The electronic CO sensor in your SAFE-T-ALERTTM CO alarm is very sensitive to CO gas. It will not react to safe levels of most other gases.Features:
Patented Double-Duty Alarm. Upgrades single 12 Volt Propane Gas alarms to a dual alarm that detects both Propane Gas and CO.
Space Saving. Compact design for RVs.
Designed for the Rugged RV Environment. Ideal for Class A Motor homes, Class B Van Campers, Class C Mini-Motor Homes, Travel Trailers, Fifth Wheels, Truck & Folding Campers.
Advanced Technology. The Alarm Mute button silences the alarm while the RV is ventilated. Rapid recovery sensor resets when silenced or reactivates the alarm if dangerous levels of Propane or CO remain.
Reliable. 12 Volt power means no missing or dead batteries to replace.
Approved. Meets RVIA/NFPA requirements.
Conforms to UL STD 2034 RV /1484 RV.
Specifications:
Conforms to UL STD 2034 RV /1484 RV
Power Supply & Current Draw: 108 mA @ 12 VDC
Operational Range: 12 Volts +/-15%
Low-voltage power warning
Operating Temperature: -40° F to +158° F
Case Size: 3.5″W x 2.5″H x 1.25″D – Mounting Bracket .25″D
Specifications:
Blower Relay: No
Fume Type: Carbon Monoxide
Generator Shutdown: No
Voltage - Input Range (Volts): 12
Box Dimensions: 2"H x 8"W x 10"L WT: 0.4 lbs
UPC: 715456257419
Owner's Manual (pdf)
Gasoline Fume Detector w/Blower Control - Black Bezel - 12VThe Single Channel Gasoline Fume Detector is an effective means to monitor gasoline fumes in an engine compartment, fuel tank storage area or in other areas where gasoline fumes might accumulate. Complete system includes Blower Control Relay, easy installation and precise monitoring. Features:
Simple Installation
Audible and visual alarm to indicate LEL (Lower Explosive Level) presence
Monitors one (1) single area
Automatically activates bilge blower
Technical Specifications:
Operating Temperature: -40° to 185°F (-40° to 85°C)
Current Draw Nominal - 55mA
Current Draw Maximum - 95mA
Operating Voltage - 9 to 30V DC
Alarm Horn - 68 dB
Display Style - Round with Chrome Bezel
Display Dimensions - 2-3/16" (5.6 cm) round
Cutout Dimension - 2-1/16" (5.2 cm) round hole
In the Box:
Fume Detector
Fuel sensors x one (1)
20' Extension Cable x one (1)
Blower Relay x one (1)
Instruction manual
*Sold as an Individual Specifications:
Blower Relay: Yes
Fume Type: Gasoline
Generator Shutdown: No
Sensors Included: 1
Voltage - Input Range (Volts): 9 to 30
Box Dimensions: 4"H x 4"W x 8"L WT: 1 lbs
UPC: 619749202523
Owner's Manual (pdf)Brochure (pdf)
Gasoline Fume Detector with Dual Channel and Blower Control - 12/24VThe Dual Channel Gasoline Fume Detector is an effective means to monitor gasoline fumes in an engine compartment, fuel tank storage area or in other areas where gasoline fumes might accumulate. Complete system includes Blower Control Relay, easy installation and precise monitoring. Features:
Simple Installation
Audible and visual alarm to indicate LEL (Lower Explosive Level) presence
Monitors two (2) separate areas simultaneously
Automatically activates bilge blower
Technical Specifications:
Operating Temperature: -40° to 185°F (-40° to 85°C)
Current Draw Nominal - 55mA
Current Draw Maximum - 150mA
Operating Voltage - 9 to 30V DC
Alarm Horn - 68 dB
Display Style - Square with Black Bezel
Display Dimensions - 2-5/8" x 2-5/8" (6.7 x 6.7 cm)
Cutout Dimension - 2-1/8" (5.4 cm) round hole
In the Box:
Fume Detector
Fuel sensors x two (2)
20' Extension Cable x two (2)
Blower Relay x one (1)
Instruction manual
*Sold as an Individual Specifications:
Blower Relay: Yes
Fume Type: Gasoline
Generator Shutdown: No
Sensors Included: 2
Voltage - Input Range (Volts): 9-30v
Box Dimensions: 4"H x 4"W x 8"L WT: 1.6 lbs
UPC: 619749202561
Owner's Manual (pdf)Brochure (pdf)
Gasoline Fume Detector - Black Bezel - 12/24VThe Single Channel Gasoline Fume Detector is an effective means to monitor gasoline fumes in an engine compartment, fuel tank storage area or in other areas where gasoline fumes might accumulate. Features:
Simple Installation
Audible and visual alarm to indicate LEL (Lower Explosive Level) presence
Monitors one (1) single area
Technical Specifications:
Operating Temperature: -40° to 185°F (-40° to 85°C)
Current Draw Nominal - 55mA
Current Draw Maximum - 95mA
Operating Voltage - 9 to 30V DC
Alarm Horn - 68 dB
Display Style - Round with Black Bezel
Display Dimensions - 2-3/16" (5.6 cm) round
Cutout Dimension - 2-1/16" (5.2 cm) round hole
In the Box:
Fume Detector
Fuel sensors x one (1)
20' Extension Cable x one (1)
Instruction manual
*Sold as an Individual Specifications:
Blower Relay: No
Fume Type: Gasoline
Generator Shutdown: No
Sensors Included: 1
Voltage - Input Range (Volts): 9 to 30
Box Dimensions: 4"H x 4"W x 8"L WT: 0.91 lbs
UPC: 619749202516
Owner's Manual (pdf)Brochure (pdf)
Gasoline Fume Detector w/Blower Control - Chrome Bezel - 12VThe Single Channel Gasoline Fume Detector is an effective means to monitor gasoline fumes in an engine compartment, fuel tank storage area or in other areas where gasoline fumes might accumulate. Complete system includes Blower Control Relay, easy installation and precise monitoring. Features:
Simple Installation
Audible and visual alarm to indicate LEL (Lower Explosive Level) presence
Monitors one (1) single area
Automatically activates bilge blower
Technical Specifications:
Operating Temperature: -40° to 185°F (-40° to 85°C)
Current Draw Nominal - 55mA
Current Draw Maximum - 95mA
Operating Voltage - 9 to 30V DC
Alarm Horn - 68 dB
Display Style - Round with Chrome Bezel
Display Dimensions - 2-3/16" (5.6 cm) round
Cutout Dimension - 2-1/16" (5.2 cm) round hole
In the Box:
Fume Detector
Fuel sensors x one (1)
20' Extension Cable x one (1)
Blower Relay x one (1)
Instruction manual
*Sold as an Individual Specifications:
Blower Relay: Yes
Fume Type: Gasoline
Generator Shutdown: No
Sensors Included: 1
Voltage - Input Range (Volts): 9 to 30
Box Dimensions: 4"H x 4"W x 8"L WT: 1 lbs
UPC: 619749202547
Owner's Manual (pdf)Brochure (pdf)