Freedom XC Pro 3000 Inverter/Charger - 3000W - 150A - 120V - 12VA true sine wave inverter with a built-in lithium-ion battery charger and transfer switch in a compact, lightweight footprint. Configure and monitor system performance via Bluetooth app available on the optional Bluetooth remote panel (# 808-0817-02).The Freedom XC PRO inverter/charger, supporting RV-C and J1939 protocols, is the most versatile and flexible AC power solution in the market today. It also features a 100 amp (2000W model) / 150 amp (3000W model) battery charger and offers all of the configurable features of the Freedom XC series inverter/charger in a compact, light weight package. It cranks out full output in invert or charge mode from -4°F (-20°C) - 104°F (40°C) for operation in all climate temperatures. The extended surge rating enables compressor loads such as an A/C or a fridge to start reliably. Features:
Extended Surge Rating: Surges to 2X continuous power for 5 seconds for motor loads
True Sine Wave AC Power: For operation of sensitive and motor loads
Ignition Control: Feature to turn inverter on/off via a 12 VDC signal and to minimize battery drain by switching the inverter off when the ignition key is turned off
Wide 10-18 VDC Input Range: Ensures inverter operation on high voltage alternators found on many new vehicle chassis
Programmable AC Under-Voltage (85-110VAC) Shutdown: Feature ideal to operate under weak shore power or generator input
Built in 50A AC Transfer Relay (3KW model): Senses when outside AC Power is present and transfers the load from the inverter to the source of incoming power
Built-In Charger Features:
Power Factor Corrected Multi-Stage Charging: Utilizes less shorepower when charging batteries. This frees up more usable AC power for running electrical devices and appliances and reduces the likelihood of tripping shorepower breakers
Programmable: Configurable 3 stage temperature compensated battery charge algorithm for optimal charging of almost any battery type up to 18V
Battery Equalization: Maximizes flooded battery life
Dead Battery Charging Down to 0 Vdc
Power Share: Prioritizes AC loads by reducing the charge current and maintaining the total input current to less than the breaker setting
Easily configurable settings to charge any lithium ion battery
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
Heart FDM-12-25 Remote Panel, Battery Status & Freedom Inverter/Charger Remote ControlProvides Valuable Inverter/Charger System Monitoring and ControlThe Freedom Remote Control Panel (part#84-2056-01) allows you to control your Freedom Combi, Freedom 458, and Freedom Marine Series Inverter/Charger system from any convenient location. It is easy to read, operate, and install, and all controls can be accessed directly from the front panel.Note: Not for Freedom HF or Freedom SW Series.Features:
Independent invert and charge on/off controls
Push button control of power sharing, equalizing, and battery set-up
Multi-colored LED displays battery state of charge, fault conditions, AC input, DC voltage, and DC amperage
LED warning indicators for low battery and overload warning
Splash-resistant design
Incoming AC breaker selection allows programmable power sharing
Easy to install
25' Cable
One-year warranty
Note: The 24-volt models of Freedom Combi inverter/chargers require a different Freedom Remote the Freedom Remote - 24V SKU 82-0101-04WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)Owner's Manual (pdf)Brochure (pdf)
300W Pure Sine Wave Inverter - 24VPST Series (120 VAC)This high efficiency DC-AC inverter converts 24 Volts DC to 300 Watts of pure sine-wave AC power at 120 Volts, 60 Hz. The unit comes with detachable cable with 12V plug adaptor and cable with battery clamps. Features include overload protection, low battery alarm / shut down, low idle power draw of less than 0.5 Amps. AC power is available from a NEMA-20R GFCI duplex outlet on the front panel. Safety certified to UL standards.Features:
High efficiency
Temperature controlled cooling fan – reduces energy consumption
Low interference Wide operating DC input range: 21.0 - 33.0 VDC
LED indicators for power and protections
Low idle power draw
Dual GFCI protected AC outlets
Commercial grade design suitable for heavy duty loads, long periods of continuous operation & for emergency back up
UPC – Universal Protection Circuit: low voltage, over voltage, over temperature, over load and short circuit
Detachable cable with 12V plug adapter
Detachable cable with battery clamps
Safety certified to UL standards, FCC compliant
Specifications:
Input: 24 VC
Output: 120 VAC
Watts: 300
Surge: 500 Watts
Weight: 3.46 (lbs)
Weight: 1.57 (kg)
Dimensions: 6.1 x 9.69 x 2.58 (in)
Dimensions: 155 x 246 x 65.5 (mm)
Safety: ETL to UL Standard
Warranty: 2 Year Limited
Applications:
Service vehicles
Mobile Offices
Boats
Recreation Vehicles, Camping
Telecommunication
Field work / Construction sites
Solar power systems
Emergency backup power
Home electronics: TV, VCR, video games
Computers, printers
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Inverter Cont. Output Wattage: 300w
Outlet Qty: 2 Duplex GFCI
Inverter Input Voltage: 24v
Waveform: Pure Sine Wave
Box Dimensions: 5"H x 8"W x 12"L WT: 4.9 lbs
UPC: 622988072147
Owner's Manual (pdf)Brochure (pdf)
600W Pure Sine Wave Inverter - 12VPST Series (120 VAC)This high efficiency DC-AC inverter converts 12 Volts DC to 600 Watts of pure sine-wave AC power at 120 Volts, 60 Hz. The unit comes with pin-type battery cable lugs. Features include built-in electronic GFCI, overload protection, low battery alarm / shut down, low idle power draw of less than 0.5 Amps. AC power is available from a NEMA-20R GFCI duplex outlet on the front panel. Safety certified to UL standards.Features:
High efficiency
Temperature controlled cooling fan – reduces energy consumption
Low interference Wide operating DC input range: 10.7 - 16.5 VDC
Commercial grade design suitable for heavy duty loads, long periods of continuous operation & for emergency back up
UPC – Universal Protection Circuit: low voltage, over voltage, over temperature, over load and short circuit
Low idle power draw
Dual GFCI protected AC outlets
Optional remote control (sold separately): Model RC-15A
Comes with pin-type battery cable lugs
Safety certified to UL standards, FCC compliant
Specifications:
Input: 12 VDC
Output: 120 VAC
Watts: 600
Surge: 1000 Watts
Remote Control: RC-15A sold separately
Weight: 5.9 (lbs)
Weight: 2.7 (kg)
Dimensions: 9.37 x 10.87 x 3.23 (in)
Dimensions: 238 x 276.2 x 82 (mm)
Safety: ETL to UL Standard
Warranty: 2 Year Limited
Applications:
Service vehicles
Mobile Offices
Boats
Recreation Vehicles, Camping
Telecommunication
Field work / Construction sites
Solar power systems
Emergency backup power
Home electronics: TV, VCR, video games
Computers, printers
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Inverter Cont. Output Wattage: 600w
Outlet Qty: 2 Duplex GFCI
Inverter Input Voltage: 12v
Waveform: Pure Sine Wave
Box Dimensions: 6"H x 11"W x 14"L WT: 7.2 lbs
UPC: 622988072154
Owner's Manual (pdf)Brochure (pdf)
Power-Pac 14AH Power Supply The 12V DC power supply features built-in backup batteries, which are charged during normal operation and then continue to power radios and critical navigation equipment when AC power is lost. The Power-Pac is ideal for commercial vessels, work boats, and yachts.The Power-Pac’s highly regulated, low-rising 10-amp output powers radios and other sensitive communications equipment without causing RF or audio interference. At the same time, it floats and charges one or two (depending on the model) built-in 7-amp/hour backup batteries. These are kept at peak charge during the normal functioning of the unit when AC is being supplied. In the event of a loss of AC power, the internal batteries automatically take over to power communication equipment, providing a true uninterruptible DC source.Features:
Highly regulated, low ripple, noise-free 12-volt output
Built-in, “on-line” stand-by battery provides immediate backup power in case of AC power loss
Internal mounting space and terminals for conversion of the 7 A/H model into the 14 A/H model
Output “Normal” indicator L.E.D.
“Back-up power only” warning light
Audible and visual low battery (10.7 VDC) voltage indicators
Low battery warning buzzer mute switch
Automatic low battery (10.3 VDC) voltage disconnect
Low voltage disconnect override button
Over-voltage protection
Current limit protection
Input/output fused
Separate output terminals are provided for charging external batteries
115/230 50-60 Hz input, selected by a slide switch on the rear panel
Specifications:
Battery Capacity: 14 amp/hour
Case Size (H x W x D): 5.3 x 9.0 x 10.5 inches (13.3 x 22.9 x 26.7 centimeters)
Weight: 24 lbs. (10.9 kg)
Input: 115/230 VAC, 50-60 Hz.
Output: 13.6 VDC @ 5A cont., 10A Int.
Regulation: 1% line and load
Ripple: 1% P-P
Operating Temp: 0-40 degrees C
With a 14 Amp/Hour Battery Installed, the Unit Provides Approximately the Following Power:
7 amps for 100 min.
10 amps for 60 min.
15 amps for 30 min.
20 amps for 15 min
*Assuming battery at full charge when a.c. power failed.The Power-Pac 7 A/H (single battery model) can power a 25-watt transceiver for up to 3 hours, based on a 20% transmit/receive duty cycle. Power-Pac 14 A/H can provide the same service for up to 6 hours. Provision is made for expanding backup power up to twelve hours (in this example, longer under lesser loads) with the installation of additional externally wired batteries (total 28 amps/hours max.). Batteries are automatically recharged when the AC is restored.The operator is kept informed of all important functions, such as AC input, DC output, and battery status, with front panel indicator lights and a low battery warning buzzer.Protection:
AC Input fuse
Internal and external Battery fuses
Over Voltage
Current Limit
Automatic Thermal Shutdown
Low Battery Disconnect
Mechanical Details:
Vinyl Laminated aluminum case
6’ standard AC power cord
Ac input selector switch
Battery Details:
Sealed Lead Acid, Deep-cycle.
Certified by DOT and IATA for shipment by Air
Weight per 7 AH Battery: 6 lbs.
Size (inch): 6” x 3.75” x 2.5”
Options:
Form C AC Failure Contacts (Contact factory for details)
Extra batteries, sold separately 7 A/H increments; each Power Pac will accommodate 28 A/H max. (14 internal, 14 external)
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)Owner's Manual (pdf)
Provides 1800 watts of sine wave AC power from a DC sourceOffering superior quality true sine wave output, the Prosine 1800 stand-alone inverter is ideally suited for electrical systems that already have a quality multistage battery charger. Designed for recreational and industrial applications, their 120-volt, 60 Hz AC power output is capable of handling both heavy duty and smaller, multiple AC loads. Prosine inverters include a backlit LCD display panel, which can be mounted remotely.Product Features
1800 watt inverters (2900 watt surge capability)
True sine wave AC output (crystal controlled)
Removable LCD display can be mounted remotely for control and monitoring
Unique DC terminals offer 180-degree connections for easy installation in tight places
Powersave mode draws only 1.5 watts under no load
Two year warranty
Protection Features
Over temperature shutdown and automatic overload protection
Over voltage and under voltage protection
Short circuit and AC backfeed protection
With less than 3% total harmonic distortion, Prosine 1000 and 1800 inverters deliver true sine wave output that is identical to AC power supplied by your utility. This clean output makes Prosine inverters ideal for handling sensitive loads and improves AC equipment performance. Expect trouble-free true sine wave electricity for televisions, audio systems, variable speed tools, and more.Light and compactProsine inverters are lighter and more compact than other inverters with similar power ratings because they use high-frequency switching technology in the power conversion process.WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications:
DC Connection Type: Hardwire
GFCI: Yes
Outlet Qty: 1 Duplex GFCI
Inverter Surge Rating: 2000w
Waveform: True Sine Wave
Inverter Input Voltage: 12v
Inverter Output Voltage: 120v
AC Connection Type: Hardwire
Inverter Cont. Output Wattage: 1800w
Box Dimensions: 8"H x 14"W x 19"L WT: 19.4 lbs
UPC: 715535618001
Owner's Manual (pdf)Brochure (pdf)
1500W Pure Sine Wave Inverter - 12VPST Series (120 VAC)This high efficiency DC-AC inverter converts 12 Volts DC to 1500 Watts of pure sine-wave AC power at 120 Volts, 60 Hz. The unit comes with pin-type battery cable lugs or can be hard-wired. Features include overload protection, low battery alarm / shut down, low idle power draw of less than 1 Amp. AC power is available from a NEMA-20R GFCI duplex outlet on the front panel. Safety certified to UL standards.Features:
High efficiency
Can be hard wired
Temperature controlled cooling fan – reduces energy consumption
Low interference
Wide operating DC input range: 10.7 - 16.5 VDC
Commercial grade design suitable for heavy duty loads, long periods of continuous operation & for emergency back up
UPC – Universal Protection Circuit: low voltage, over voltage, over temperature, over load and short circuit
Low idle power draw
Dual GFCI protected AC outlets
Optional remote control (sold separately): Model RC-200
Safety certified to UL standards, FCC compliant
Specifications:
Input: 12 VDC
Output: 120 VAC
Watts: 1500
Surge: 3000 Watts
Remote Control: RC-200 sold separately
Weight: 15.6 (lbs)
Weight: 7.1 (kg)
Dimensions: 10.35 x 18.43 x 4.16 (in)
Dimensions: 263 x 468.2 x 105.6 (mm)
Safety: ETL to UL Standard
Warranty: 2 Year Limited
Applications:
Service vehicles
Mobile Offices
Boats
Recreation Vehicles, Camping
Telecommunication
Field work / Construction sites
Solar power systems
Emergency backup power
Home electronics: TV, VCR, video games
Computers, printers
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Inverter Cont. Output Wattage: 1500w
Outlet Qty: 2 Duplex GFCI
Inverter Input Voltage: 12v
Waveform: Pure Sine Wave
Box Dimensions: 6"H x 12"W x 21"L WT: 17 lbs
UPC: 622988072192
Owner's Manual (pdf)Brochure (pdf)
115-24-10 Power SupplyThis super-rugged DC power supply is ideal for powering 24-volt communication and navigation equipment onboard commercial vessels where reliability is essential. The proven linear circuit design provides pure noise-free output and a long service life.Features:
Excellent Regulation and Ripple Spec (output voltage maintained within 1% under all rated line and load conditions)
Polyurethane conformal coated PC board and corrosion-resistant heavy-duty aluminum case with integral shock mounts assure survival in hostile environments
The heat generated by semi-conductors is extracted and dissipated by large heat sink fins for cool operation
Protection: overvoltage, current limit; (set @ 105% of intermittent rating), thermal overload, and input/output fusing
Thermally activated cooling fan on “CD” units
Specifications:
Nominal Input/VAC: 115/230
Maximum Input Current @115: 5.5
Maximum Input Current @230: 2.5
Output Amperage (Intermittent): 10
Output Amperage (Continuous): 4
Weight: 20 lbs. / 9.1 kg
Case Size:H x W x D (inch): 5.7” x 4.8” x 16.3”Input Range105-125/210-250 VAC (selectable), 50-60 Hz; Derate to 50% output below 110 and 220 VACOperating TemperatureStandard Units - 0-50 degrees C, Derate linearly from 100% @ 40 degrees C to 50% @ 50 degrees C thermal shutdown @ 85 degrees C case temperatureDuty Cycle:
Intermittent: 20 minutes max on time, 20% duty
Continuous: 24 hours/day 100% Duty
Options:
Modify for use as a battery charger
The output voltage is adjusted (see Output Voltage for range)
Transfer relay for back-up battery in event of power failure (ERC option)
Output Voltage:
24.5 VDC (Internally adjustable 21-27.5 VDC)
Ripple: 70mV P-P (@ 110-125 / 220-250 VAC input)
1% Line and Load (@ 110-125 / 220-250 VAC input)
Mechanical:
Powder-coated aluminum heat sink case
Front panel terminal block
Heavy-duty mounting flange
Conformal-coated PC board
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
PRO Series InvertersPerformance inverters designed for RVs and boatsDesigned for RV and marine electrical systems that already have a battery charger or generator installed, Xantrex PRO Inverters deliver modified sine wave power for small appliances, TVs, and other onboard electronics from a battery bank. DescriptionThe Xantrex PRO Series Inverters are the perfect complement to generators when shore power is unavailable, to quietly and efficiently provide household power when needed. The PRO Series design is both user friendly and versatile. These inverters feature a detachable, digital remote control to display precise inverter, AC source and battery status information from one convenient location. A built-in transfer switch automatically detects when generator or shore power status changes to ensure power is always available. The 1800W is designed for demanding RV and marine conditions. They meet FCC Class B regulations to eliminate interference potential with other electronics, while UL 458 certification means they meet strict RV and marine safety standards. Versatile enough to be mounted either horizontally or vertically, these inverters can be easily installed to fit into any compartment. Conformal coated boards also minimize the chance of problems from moist operating conditions. Performance Features
Inverter easily powers TVs, small appliances, and other electronics
Built-in 15A circuit breaker to protect GFCI connected loads
Up to 25A pass through for hardwired loads
Digital remote control displays power output, AC source and battery voltage
Detachable remote control can be mounted wherever convenient
Conformal coated electronics provide moisture resistance
Designed to be hard-wired using a terminal strip or by connecting AC through a GFCI receptacle (included)
Protection Features
Battery over-voltage and under-voltage protection
Over temperature shutdown
Automatic overload protection
Short-circuit protection
Ground fault protection
WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
DC Connection Type: Hardwire
GFCI: Yes
Inverter Input Voltage: 12v
Outlet Qty: 1 Duplex GFCI
Inverter Surge Rating: 3600w
Waveform: Modified Sine Wave
Inverter Output Voltage: 120v
AC Connection Type: Hardwire
Inverter Cont. Output Wattage: 1800w
Box Dimensions: 6"H x 10"W x 18"L WT: 13 lbs
UPC: 715535113537
Owner's Manual (pdf)Brochure (pdf)
115-24-18CD Power SupplyThis super-rugged DC power supply is ideal for powering 24-volt communication and navigation equipment onboard commercial vessels where reliability is essential. The proven linear circuit design provides pure noise-free output and a long service life.Features:
Excellent Regulation and Ripple Spec (output voltage maintained within 1% under all rated line and load conditions)
Polyurethane conformal coated PC board and corrosion-resistant heavy-duty aluminum case with integral shock mounts assure survival in hostile environments
The heat generated by semi-conductors is extracted and dissipated by large heat sink fins for cool operation
Protection: overvoltage, current limit; (set @ 105% of intermittent rating), thermal overload, and input/output fusing
Thermally activated cooling fan on “CD” units
Specifications:
Nominal Input/VAC: 115/230
Maximum Input Current @115: 5.5
Maximum Input Current @230: 2.5
Output Amperage (Intermittent): 10
Output Amperage (Continuous): 4
Weight: 20 lbs. / 9.1 kg
Case Size:H x W x D (inch): 5.7” x 4.8” x 16.3”Input Range105-125/210-250 VAC (selectable), 50-60 Hz; Derate to 50% output below 110 and 220 VACOperating TemperatureC.D. Units - 0-65 degrees C, Derate linearly from 100% @ 50 degrees C to 50% @ 65 degrees C thermal Shutdown @ 85 degrees C case temperatureDuty Cycle:
Intermittent: 20 minutes max on time, 20% duty
Continuous: 24 hours/day 100% Duty
Options:
Modify for use as a battery charger
The output voltage is adjusted (see Output Voltage for range)
Transfer relay for back-up battery in event of power failure (ERC option)
Output Voltage:
24.5 VDC (Internally adjustable 21-27.5 VDC)
Ripple: 70mV P-P (@ 110-125 / 220-250 VAC input)
1% Line and Load (@ 110-125 / 220-250 VAC input)
Mechanical:
Powder-coated aluminum heat sink case
Front panel terminal block
Heavy-duty mounting flange
Conformal-coated PC board
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
Freedom X 3000 Truesine Inverter - 120AC/12DC HardwireTrue sine wave 120 VAC inverter with built-in transfer switch. Designed for recreational and commercial applications.The Freedom X inverter offers premium performance in a lightweight compact package. It cranks out full output from -4°F - 104°F for operation in all climate temperatures. The extended surge rating of the Freedom X makes it ideal to start difficult loads including fridge and microwave. The quick connect terminals at AC IN/OUT make installation a breeze. The Freedom X has become a popular choice for boaters in a short span of time. Xantrex has now added another product to this series — Freedom X 3000, a 3000-watt pure sine wave inverter with built-in 30A transfer relay. The Freedom X 3000 delivers full output up to 40°C/104°F with a 2 second surge of 6000 watts. The Freedom X 3000 features a large wiring bay with quick connect AC terminals for fast, reliable & easy wiring.Features:
Extended Surge Rating: Surges to 2X continuous power for 2 seconds for motor loads
True Sine Wave AC Power: For operation of sensitive and motor loads
Ignition Control: Feature to turn inverter on/off via a 12 VDC signal and to minimize battery drain by switching the inverter off when the ignition key is turned off
Wide 10-18 VDC Input Range: Ensures inverter operation on high voltage alternators found on many new vehicle chassis
Built-in 30A AC Transfer Relay: Senses when outside AC Power is present and transfers the load from the inverter to the source of incoming power (shore or generator). The unit also automatically switches from invert mode to charge mode
Quick Installation: Huge wiring bay for easy access and quick connect AC in/out terminals for fast & easy wiring
Specifications:
Inverts: 12 Volt DC To 120 Volt AC
Continuous Output Power (W): 3000 Watt
With Volt/Watt Meter: No
With Thermal Protection: No
With Battery Cables: No
With Fuse: No
WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications:
Inverter Cont. Output Wattage: 3000w
AC Connection Type: Hardwire
DC Connection Type: Hardwire
GFCI: Optional
Outlet Qty: Optional
Inverter Surge Rating: 6000w
Inverter Input Voltage: 12v
Inverter Output Voltage: 120v
Waveform: True Sine Wave
Box Dimensions: 9"H x 16"W x 20"L WT: 19.9 lbs
UPC: 715535901493
115-12-20A Power SupplyThis super-rugged DC power supply is ideal for powering 12-volt communication and navigation equipment onboard commercial vessels where reliability is essential. The proven linear circuit design provides pure noise-free output and a long service life.Features:
Excellent Regulation and Ripple Spec (output voltage maintained within 1% under all rated line and load conditions)
Polyurethane conformal coated PC board and corrosion-resistant heavy-duty aluminum case with integral shock mounts assure survival in hostile environments
The heat generated by semi-conductors is extracted and dissipated by large heat sink fins for cool operation
Protection: overvoltage, current limit; (set @ 105% of intermittent rating), thermal overload, and input/output fusing
Thermally activated cooling fan on “CD” units
Specifications:
Nominal Input/VAC: 115/230
Maximum Input Current @115: 5.5
Maximum Input Current @230: 2.5
Output Amperage (Intermittent): 20
Output Amperage (Continuous): 8
Weight: 20 lbs. / 9.1 kg
Case Size:H x W x D (inch): 5.7” x 4.8” x 16.3”Input Range105-125/210-250 VAC (selectable), 50-60 Hz; Derate to 50% output below 110 and 220 VACOperating TemperatureStandard Units - 0-50 degrees C, Derate linearly from 100% @ 40 degrees C to 50% @ 50 degrees C thermal shutdown @ 85 degrees C case temperatureDuty Cycle:
Intermittent: 20 minutes max on time, 20% duty
Continuous: 24 hours/day 100% Duty
Options:
Modify for use as a battery charger
The output voltage is adjusted (see Output Voltage for range)
Transfer relay for back-up battery in event of power failure (ERC option)
Output Voltage:
13.6 VDC (internally adjustable 12.6-14.5 VDC)
Ripple: 40mV P-P (@ 110-125 / 220-250 VAC input)
1% Line and Load (@ 110-125 / 220-250 VAC input)
Mechanical:
Powder-coated aluminum heat sink case
Front panel terminal block
Heavy-duty mounting flange
Conformal-coated PC board
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.