Automotive/RV

Rooftop MountingFour rugged, watertight mounting pads secure the TracVision A7 or A9 to the roof for a streamlined installation. A single cable connects the antenna to the receiver below.

Read more less

TRUEcharge™3 40A 3 Bank Battery Charger - 12VTRUEcharge3 battery chargers lead the industry with a small footprint and ultra-compact design. In addition to meeting global safety and regulatory standards, they feature low electrical interference and efficient power factor-corrected multistage charging. The TRUEcharge3 Chargers can be mounted in multiple positions thanks to their inherent drip-proof design characteristics. Unlike its predecessors, TRUEcharge3 is lithium-ion battery compatible.Designed for recreational and commercial applications worldwide, TRUEcharge3 accepts 90–265 Vac, and 47–63 Hz, which makes traveling abroad and handling poor-quality power a breeze. The easy-to-read display of the TRUEcharge3 12 V models can be enhanced with an optional remote panel. Each model has built-in protection against surges and spikes on the AC power line.Features: Microprocessor-controlled, multistage charging algorithms Settings for two and three-stage charging Battery-equalization feature Settings for flooded, gel, AGM, or lithium-ion batteries Equipped with parallel stacking (remote panel required) Ability to charge batteries drained to extremely low voltage Added quiet mode Protection Features: Reverse-battery polarity protection Drip-proof design DC over-voltage protection Over-temperature protection Circuit breaker protection Three-Stage ChargingMultistage charging ensures batteries receive optimum charging, but with minimal wear and tear, regulating the voltage and current delivered to the batteries in three automatic stages: Bulk: Replaces 70–80% of the battery’s state-of-charge at the fastest possible rate Absorption: Replenishes the remaining 20–30% of charge, bringing the battery to a full charge at a slow, safe rate Float: Voltage is reduced and held constant to prevent damage and maintain batteries at a full charge for the remaining 20–30% of charge, bringing the battery to a full charge at a slow, safe rate Power Factor Corrected (PFC) ChargingLess shore power is required for charging batteries, freeing up more usable AC power for running electrical devices and appliances and reducing the likelihood of tripping shore power breakers.Electrical Specifications (@ 25 degrees C unless otherwise noted): Output Current (nominal): 40 A  Output Voltage (nominal, depending on settings): Charge 14.2–15.5; Float 13.4–13.8 Vdc; 16 V DC Output Connections: Three AC Input Voltage: 90–265 Vac; 47–63 Hz 120 Vac, 230 Vac, 240 Vac nominal Temperature Compensation: Three settings  Charger Efficiency: > 80% Battery Type: Gel, Flooded, AGM, LiFePO4  Minimum Recommended Battery Bank Size: 80 Ah General Specifications: Operating Temperature Range: 0–60°C (32–140°F)  Storage Temperature -40–80°C (-40–176°F) Battery Connection: Three positive terminals and one negative terminal Dimensions (H x W x L): 70 x 170 x 250 mm (2.8 x 6.7 x 9.8”) Weight 2.2 kg (4.8 lb) Regulatory Approvals Meets CSA 60335-2-29, CE Marked for the Low Voltage Directive (safety) and the EMC Directive, UL1564, IEC 60335-2-29, IP32 per EN.IEC 60529, FCC Part 158, Canada ICES-003 Class B emissions limits, ABYC A-31, and DOE/CEC energy efficiency compliant.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Charger Output - Amps: 40a Charger Output Voltage: 12v Charging Banks: 3 Portable: No Box Dimensions: 6"H x 11"W x 14"L WT: 6.1 lbs UPC: 715535920814 Quick Guide (pdf)Owner's Manual (pdf)Brochure (pdf)

Read more less

Freedom X 3000 Truesine Inverter - 120AC/12DC HardwireTrue sine wave 120 VAC inverter with built-in transfer switch. Designed for recreational and commercial applications.The Freedom X inverter offers premium performance in a lightweight compact package. It cranks out full output from -4°F - 104°F for operation in all climate temperatures. The extended surge rating of the Freedom X makes it ideal to start difficult loads including fridge and microwave. The quick connect terminals at AC IN/OUT make installation a breeze. The Freedom X has become a popular choice for boaters in a short span of time. Xantrex has now added another product to this series — Freedom X 3000, a 3000-watt pure sine wave inverter with built-in 30A transfer relay. The Freedom X 3000 delivers full output up to 40°C/104°F with a 2 second surge of 6000 watts. The Freedom X 3000 features a large wiring bay with quick connect AC terminals for fast, reliable & easy wiring.Features: Extended Surge Rating: Surges to 2X continuous power for 2 seconds for motor loads True Sine Wave AC Power: For operation of sensitive and motor loads Ignition Control: Feature to turn inverter on/off via a 12 VDC signal and to minimize battery drain by switching the inverter off when the ignition key is turned off Wide 10-18 VDC Input Range: Ensures inverter operation on high voltage alternators found on many new vehicle chassis Built-in 30A AC Transfer Relay: Senses when outside AC Power is present and transfers the load from the inverter to the source of incoming power (shore or generator). The unit also automatically switches from invert mode to charge mode Quick Installation: Huge wiring bay for easy access and quick connect AC in/out terminals for fast & easy wiring Specifications: Inverts: 12 Volt DC To 120 Volt AC Continuous Output Power (W): 3000 Watt With Volt/Watt Meter: No With Thermal Protection: No With Battery Cables: No With Fuse: No WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Inverter Cont. Output Wattage: 3000w AC Connection Type: Hardwire DC Connection Type: Hardwire GFCI: Optional Outlet Qty: Optional Inverter Surge Rating: 6000w Inverter Input Voltage: 12v Inverter Output Voltage: 120v Waveform: True Sine Wave Box Dimensions: 9"H x 16"W x 20"L WT: 19.9 lbs UPC: 715535901493

Read more less

Xantrex Freedom SW3012 Inverter/Charger815-301212V, 3000W - 120 Vac / 60 HzPowerful. Configurable. Versatile... The NEW GENERATION Freedom SW series represents highly sophisticated and advanced inverter/ chargers available in 3000 W with 150 A charger and 2000 W with 100 A charger models. Product DescriptionThe second generation 3000 watt model has been completely redesigned to include many of the same great features found in its high power counterpart.A key feature enhancement is 'Generator Support Mode' which enables the Freedom SW to supplement a generator when AC loads exceed the generator's capacity. The new generation models also feature improved AC transfer/AC input detection time, providing the ability to transfer AC loads to batteries in less than 10 milliseconds when the incoming grid or generator power is lost. Connected loads are almost unable to feel the power transition due to this quick transfer time. Both models are approved to UL458 with marine supplement, CSA, ABYC and FCC, Class B requirements.NEW - PARALLEL AND SERIES STACKINGParallel stacking enables the Freedom SW inverter/chargers to double the AC output in inverter mode. Series stacking enables the Freedom SW inverter/chargers to generate 120/240 V split phase output2 2 AC source must be split phase, requires Stacking Cable (part# 808-9005)ApplicationDesigned for a variety of mobile applications such as commercial, emergency and recreational vehicles, marine vessels, construction and military equipment.Product Features Pure sine wave output to operate sensitive electronics Advanced configuration options for customized applications Parallel and series stacking capability Built-in transfer switch automatically transfers between inverter power and incoming AC power Power factor corrected, multi-stage charger for fast, efficient charging Temperature compensated charging for a vareity of climate conditions Ignition lockout feature helps prevent unnecessary battery drain when the alternator is not providing power3 Wide operating temperature range: -4°F to 140°F (-20°C to 60°C) Conformal coated circuit boards for humid environments Dual input / Dual output AC interface for 3000 W model Ability to charge batteries drained to extremely low voltage Compatible with the Xantrex Automatic Generator Start4 (Part# 809-0915) 3When used with the remote panel4Sold separatelyProtection Features Battery over-voltage and under-voltage protection Over-temperature shutdown Automatic overload protection Short-circuit protection Integrated, resettable AC breakers WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Charger Output Voltage: 12v Inverter Output Voltage: 120v Inverter Input Voltage: 12v Charger Input - Voltage: 120v Outlet Qty: Optional Charging Banks: 1 Inverter Cont. Output Wattage: 3000w Charger Output - Amps: 150a Box Dimensions: 12"H x 18"W x 21"L WT: 69.4 lbs UPC: 008153012413 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

RitchieSport Automotive CompassFeatures: 2″ (51 mm) Direct-Reading, High Visibility Dial. Two-Sided, Self-Adhesive Mounting Pads Included Reversible Bracket allows a mounting range of over 300 degrees from overhead, through angled and vertical mounts to horizontal surfaces These mounting position options and your choice of mounting hardware permit mounting on everything from windshield or supporting frame structures, to slanted dashboards and consoles, to almost any flat, angled or vertical surface Internal Green Night Lighting High Temp Composite Construction for Extended Operating Range Hardened Steel Pivot and Sapphire Jewel Movement Built-in Compensators Color: Gray Exclusive 5-Year Ritchie Warranty Approx. Shipping Weight: 5oz (142g)Notes:Comes standard with 12v lighting. Specifications: Mounting Style: Bracket Read: Front Backlight: Yes Lubber Lines: Yes Box Dimensions: 3"H x 4"W x 5"L WT: 0.3 lbs UPC: 010342170019 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

115-12-20A Power SupplyThis super-rugged DC power supply is ideal for powering 12-volt communication and navigation equipment onboard commercial vessels where reliability is essential. The proven linear circuit design provides pure noise-free output and a long service life.Features: Excellent Regulation and Ripple Spec (output voltage maintained within 1% under all rated line and load conditions) Polyurethane conformal coated PC board and corrosion-resistant heavy-duty aluminum case with integral shock mounts assure survival in hostile environments The heat generated by semi-conductors is extracted and dissipated by large heat sink fins for cool operation Protection: overvoltage, current limit; (set @ 105% of intermittent rating), thermal overload, and input/output fusing Thermally activated cooling fan on “CD” units Specifications: Nominal Input/VAC: 115/230     Maximum Input Current @115: 5.5 Maximum Input Current @230: 2.5 Output Amperage (Intermittent): 20 Output Amperage (Continuous): 8 Weight: 20 lbs. / 9.1 kg Case Size:H x W x D (inch): 5.7” x 4.8” x 16.3”Input Range105-125/210-250 VAC (selectable), 50-60 Hz; Derate to 50% output below 110 and 220 VACOperating TemperatureStandard Units - 0-50 degrees C, Derate linearly from 100% @ 40 degrees C to 50% @ 50 degrees C thermal shutdown @ 85 degrees C case temperatureDuty Cycle: Intermittent: 20 minutes max on time, 20% duty Continuous: 24 hours/day 100% Duty Options: Modify for use as a battery charger The output voltage is adjusted (see Output Voltage for range) Transfer relay for back-up battery in event of power failure (ERC option) Output Voltage: 13.6 VDC (internally adjustable 12.6-14.5 VDC) Ripple: 40mV P-P (@ 110-125 / 220-250 VAC input) 1% Line and Load (@ 110-125 / 220-250 VAC input) Mechanical: Powder-coated aluminum heat sink case Front panel terminal block Heavy-duty mounting flange Conformal-coated PC board This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Rhino Sewer Adapter PROMake RV sanitation simpler and more efficient with the Camco Rhino RV Sewer Adapter PRO. This must-have camping tool ensures a secure, leak-proof, and odor-tight connection between your camper sewer hose and public inlets, making waste disposal effortless every time. The built-in handle offers superior control, allowing you to empty your waste holding tanks with ease and precision.The integrated flexible gasket is thoughtfully designed to fit a variety of dump station inlets, for a snug, reliable fit no matter where your travels take you. And if you find yourself at a campground dealing with threadless pipes or damaged threads, don’t worry—it’s built to handle those situations too, giving you a seamless and reliable connection.Whether you're gearing up for a weekend escape or a cross-country road trip, this dependable camper accessory keeps your sanitation routine clean and efficient—so you can focus on enjoying what matters most.

Read more less

800W Modified Sine Wave Inverter - 12VSAM Series low interference, high efficiency modified sine wave DC-AC inverters convert 12 VDC to 115 VAC at an output frequency of 60 Hz.Features: USB charging port +5 VDC, 2.1A 2 three prong outlets Compact design Load controlled cooling fan 2 X Surge Low battery input alarm Universal protection circuit: thermal, battery, overload, short circuit, earth fault Soft start technology Cool surface technology Low interference technology Specifications: Input: 12 VDC Output: 115 VAC Watts: 800 Watts Surge: 1600 Watts Outlets: 2 Weight: 4.5 (lbs) Weight: 2.05 (kg) Dimensions: 8 x 7 x 2.25 (in) Dimensions: 20.3 x 17.8 x 5.7 (cm) Safety: ETL Warranty: 2 Year Limited Applications: Television (up to 32") Portable Vaccum Blender Laptops Cell Phones Cameras MP3 Players Handheld Video Games Lights/Lamps Portable Stereos CD/DVD Players WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Inverter Cont. Output Wattage: 800w Inverter Input Voltage: 12v Waveform: Modified Sine Wave Box Dimensions: 3"H x 11"W x 12"L WT: 4.1 lbs UPC: 622988078095 Owner's Manual (pdf)Brochure (pdf)

Read more less

PT-24-20U Battery Charge“Smart” marine battery charging technology for 24-volt systems aboard workboats, military vessels, commercial vessels, and recreational craft. This charger interacts with batteries, providing the optimum three-stage charge process for fast recovery and conditioning, maximizing performance, and extending battery life.A selector switch adjusts output voltage to adapt to gel-cell, flooded lead-acid, or AGM battery types. An optional temperature compensation sensor also adjusts output for ideal voltage based on changes in the batteries’ ambient temperature. All models are housed in a rugged stainless steel case with a durable white powder coat finish, and the internal circuitry is polyurethane coated for maximum corrosion resistance.Features: 24-volt model “Smart” circuitry provides three-stage charging – bulk, absorption, float Gel-cell/Flooded Lead-acid/AGM battery type switch selects optimum charge/float voltages Multiple isolated output banks; ammeter indicates total output current The optional sensor adjusts output voltage based on battery temperature Current limiting prevents damage from overloading Use as a power supply; can power loads without a battery in line Built to last – rugged stainless steel case with a durable white powder coat finish with an optional drip shield and marinized internal circuitry Protection: Current Limiting, Thermal Protection, Forced Air Cooling, Drip Shield Install in conjunction with PT-MCU for additional control and monitoring ABS-type approval for battery charging and power supplies Specifications: Input VAC (50-60 Hz.): 85 – 135, 170 – 270 Input Amps @ Full Load: @ 115 VAC: 6.8, @ 230 VAC: 4.3  Power Factor: .7 Max Output Amps: 20 Output Banks: 3 Battery Capacity (Amp-Hours): 40– 200 Operating Temp. Rating Reference: T-3 Case Size Reference: A-2 Case Size (H x W x D): 13.85B x 9.5 x 4.8B inches (35.2B x 24.1 x 12.2B centimeters) *Note with Dripshield installed B add .75” (1.9 cm) to height and 1.35” (3.4 cm) to depth Weight Lbs./Kg: 12/6 Optional Temp. Sensor Model: TCS-12/24     Remote Panel Model: NA Compliance Reference: CG, ABS Temperature Rating References: Temperature: -20 degrees C to +60 degrees C     Derate Linearly From 100% @ 50 degrees C to 60% @ 60 degrees C Nominal Output Voltages at Gel/Flooded Switch Settings (without Temperature Compensation): Gel-Cell: 28.0 VDC Charge @ 50% load and 27.2 VDC Float @ .5 amp load Flooded/AGM: 28.4 VDC Charge @ 50% load and 26.8 VDC Float @ .5 amp load Compliance References: UL: UL 1950 (per DNB report) CG: USCG CFR 183.410 (Ignition protected) EN: EN 60335-1 CE: Carries the CE mark ABS: PT Series meets SVR 2009 4-8-3/5.9, Under 90 meters Rules 2006 4-6-4/7.19, and HSNC 2007 4-8-3/5.13. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Charger Input - Voltage: 115/230v Charger Output - Amps: 20a Charger Output Voltage: 24v Charging Banks: 3 Inverter Input Voltage: 115/230v Inverter Output Voltage: 24v Outlet Qty: Hardwire Portable: No Box Dimensions: 11"H x 15"W x 20"L WT: 14.3 lbs Quick Guide (pdf)Owner's Manual (pdf)

Read more less

CHILLER™ 30-Can Soft-Sided Portable Cooler - BlackMeet the CHILLER™ 30-Can Soft-Sided Portable Cooler. Whether you’re bringing drinks to the game or keeping the fam fueled on a hike, this cooler’s easy and comfortable to carry thanks to its adjustable padded sling strap and side handles. This cooler’s exterior is made from recycled polyester fibers so you’ll help reduce your impact on the environment.Features: Portable: Adjustable padded sling strap and padded side handles for easy transport; zippered front and inside mesh pockets for storing ice packs and other extras Recycled Fabric: Exterior fabric is made from recycled polyester fibers Superior Ice Retention: TempLock™ Insulation keeps food and drinks cold for 12 hours or more Leakproof: Welded seams prevent leaks Easy To Clean: Removable antimicrobial* and stain-resistant hard plastic liner helps prevent odor, mildew, and mold Capacity: Holds up to 30 cans Specifications: Color: Black Weight (lbs): 2.15 Exterior Height (inches): 13.0 Exterior Length (inches): 11.0 Exterior Width (inches): 13.2 Capacity: 30 Cans Cooler Cup Holders: No Cooler Wheels: No *This product does not protect users against food-borne bacteria. Clean thoroughly after each use. Specifications: Color: Black Box Dimensions: 11"H x 14"W x 14"L WT: 2.7 lbs UPC: 076501170719

Read more less

Hybrid Ceramic Detailer - 26ozMeguiar’s Hybrid Ceramic Detailer – Remove Contaminants, Boost Gloss & Enhance Protection. Meguiar’s Hybrid Ceramic Detailer provides the missing link between washing and waxing with Hybrid Ceramic protection. This is the perfect product to use in between applications of Meguiar’s Hybrid Ceramic Wax or Meguiar’s Hybrid Ceramic Liquid Wax to quickly enhance the existing hydrophobic water beading protection. You can also use this advanced formula to remove light contaminants and dust to maintain that “just washed” appearance while adding a layer of hybrid, SiO2 ceramic protection that beads water like crazy! Features: CLEANS & PROTECTS: Spray detailer gently removes contaminants like dust, finger prints & bird droppings, while adding water beading protection CUTTING-EDGE TECHNOLOGY: Contains sophisticated SiO2 Hybrid Ceramic protection EASY TO USE: Removes light & fresh contaminants by easily spraying on, wiping off ENHANCES PROTECTION: Enhances waxes, coatings & sealants ACHIEVE A JUST-WASHED LOOK: Gently remove fresh contaminants between regular washes before they have the chance to bond Specifications: Type: Ceramic Coating Box Dimensions: 2"H x 4"W x 11"L WT: 11.4 lbs

Read more less

Hybrid Ceramic Detailer - 26ozMeguiar’s Hybrid Ceramic Detailer – Remove Contaminants, Boost Gloss & Enhance Protection. Meguiar’s Hybrid Ceramic Detailer provides the missing link between washing and waxing with Hybrid Ceramic protection. This is the perfect product to use in between applications of Meguiar’s Hybrid Ceramic Wax or Meguiar’s Hybrid Ceramic Liquid Wax to quickly enhance the existing hydrophobic water beading protection. You can also use this advanced formula to remove light contaminants and dust to maintain that “just washed” appearance while adding a layer of hybrid, SiO2 ceramic protection that beads water like crazy! Features: CLEANS & PROTECTS: Spray detailer gently removes contaminants like dust, finger prints & bird droppings, while adding water beading protection CUTTING-EDGE TECHNOLOGY: Contains sophisticated SiO2 Hybrid Ceramic protection EASY TO USE: Removes light & fresh contaminants by easily spraying on, wiping off ENHANCES PROTECTION: Enhances waxes, coatings & sealants ACHIEVE A JUST-WASHED LOOK: Gently remove fresh contaminants between regular washes before they have the chance to bond Specifications: Type: Ceramic Coating Box Dimensions: 2"H x 4"W x 11"L WT: 1.9 lbs UPC: 070382014872

Read more less