Automotive/RV

479 products


  • Sale -29% Newmar Power-Pac 7AH Power Supply [POWER-PAC7AH]

    Newmar Power-Pac 7AH Power Supply [POWER-PAC7AH]

    Power-Pac 7AH Power SupplyThe 12V DC power supply features built-in backup batteries, which are charged during normal operation and then continue to power radios and critical navigation equipment when AC power is lost. The Power-Pac is ideal for commercial vessels, work boats, and yachts.The Power-Pac’s highly regulated, low-rising 10-amp output powers radios and other sensitive communications equipment without causing RF or audio interference. At the same time, it floats and charges one or two (depending on the model) built-in 7-amp/hour backup batteries. These are kept at peak charge during the normal functioning of the unit when AC is being supplied. In the event of a loss of AC power, the internal batteries automatically take over to power communication equipment, providing a true uninterruptible DC source.Features: Highly regulated, low ripple, noise-free 12-volt output Built-in, “on-line” stand-by battery provides immediate backup power in case of AC power loss Internal mounting space and terminals for conversion of the 7 A/H model into the 14 A/H model Output “Normal” indicator L.E.D. “Back-up power only” warning light Audible and visual low battery (10.7 VDC) voltage indicators Low battery warning buzzer mute switch Automatic low battery (10.3 VDC) voltage disconnect Low voltage disconnect override button Over-voltage protection Current limit protection Input/output fused Separate output terminals are provided for charging external batteries 115/230 50-60 Hz input, selected by a slide switch on the rear panel Specifications: Battery Capacity: 7 amp/hour   Case Size (H x W x D): 5.3 x 9.0 x 10.5 inches (13.3 x 22.9 x 26.7 centimeters)   Weight: 18 lbs. (8.2 kg) Input: 115/230 VAC, 50-60 Hz. Output: 13.6 VDC @ 5A cont., 10A Int. Regulation: 1% line and load Ripple: 1% P-P Operating Temp: 0-40 degrees C With a 7 Amp/Hour Battery Installed, the Unit Provides Approximately the Following Power. *7 Amps for 40 Min. 10 amps for 20 min. 15 amps for 10 min. 20 amps for 4 min. *Assuming battery at full charge when a.c. power failed.The Power-Pac 7 A/H (single battery model) can power a 25-watt transceiver for up to 3 hours, based on a 20% transmit/receive duty cycle. Power-Pac 14 A/H can provide the same service for up to 6 hours. Provision is made for expanding backup power up to twelve hours (in this example, longer under lesser loads) with the installation of additional externally wired batteries (total 28 amps/hours max.). Batteries are automatically recharged when the AC is restored.The operator is kept informed of all important functions, such as AC input, DC output, and battery status, with front panel indicator lights and a low battery warning buzzer.Protection: AC Input fuse Internal and external Battery fuses Over Voltage Current Limit Automatic Thermal Shutdown Low Battery Disconnect Mechanical Details: Vinyl Laminated aluminum case 6’ standard AC power cord Ac input selector switch Battery Details: Sealed Lead Acid, Deep-cycle. Certified by DOT and IATA for shipment by Air Weight per 7 AH Battery; 6 lbs. Size (inch): 6” x 3.75” x 2.5” Options: Form C AC Failure Contacts (Contact factory for details) Extra batteries, sold separately 7 A/H increments; each Power Pac will accommodate 28 A/H max. (14 internal, 14 external) This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)Owner's Manual (pdf)

    $913.00$644.50

  • Sale -25% Newmar 115-12-20A Power Supply [115-12-20A]

    Newmar 115-12-20A Power Supply [115-12-20A]

    115-12-20A Power SupplyThis super-rugged DC power supply is ideal for powering 12-volt communication and navigation equipment onboard commercial vessels where reliability is essential. The proven linear circuit design provides pure noise-free output and a long service life.Features: Excellent Regulation and Ripple Spec (output voltage maintained within 1% under all rated line and load conditions) Polyurethane conformal coated PC board and corrosion-resistant heavy-duty aluminum case with integral shock mounts assure survival in hostile environments The heat generated by semi-conductors is extracted and dissipated by large heat sink fins for cool operation Protection: overvoltage, current limit; (set @ 105% of intermittent rating), thermal overload, and input/output fusing Thermally activated cooling fan on “CD” units Specifications: Nominal Input/VAC: 115/230     Maximum Input Current @115: 5.5 Maximum Input Current @230: 2.5 Output Amperage (Intermittent): 20 Output Amperage (Continuous): 8 Weight: 20 lbs. / 9.1 kg Case Size:H x W x D (inch): 5.7” x 4.8” x 16.3”Input Range105-125/210-250 VAC (selectable), 50-60 Hz; Derate to 50% output below 110 and 220 VACOperating TemperatureStandard Units - 0-50 degrees C, Derate linearly from 100% @ 40 degrees C to 50% @ 50 degrees C thermal shutdown @ 85 degrees C case temperatureDuty Cycle: Intermittent: 20 minutes max on time, 20% duty Continuous: 24 hours/day 100% Duty Options: Modify for use as a battery charger The output voltage is adjusted (see Output Voltage for range) Transfer relay for back-up battery in event of power failure (ERC option) Output Voltage: 13.6 VDC (internally adjustable 12.6-14.5 VDC) Ripple: 40mV P-P (@ 110-125 / 220-250 VAC input) 1% Line and Load (@ 110-125 / 220-250 VAC input) Mechanical: Powder-coated aluminum heat sink case Front panel terminal block Heavy-duty mounting flange Conformal-coated PC board This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

    $1,360.00$1,021.50

  • Sale -29% Newmar 115-24-18CD Power Supply [115-24-18CD]

    Newmar 115-24-18CD Power Supply [115-24-18CD]

    115-24-18CD Power SupplyThis super-rugged DC power supply is ideal for powering 24-volt communication and navigation equipment onboard commercial vessels where reliability is essential. The proven linear circuit design provides pure noise-free output and a long service life.Features: Excellent Regulation and Ripple Spec (output voltage maintained within 1% under all rated line and load conditions) Polyurethane conformal coated PC board and corrosion-resistant heavy-duty aluminum case with integral shock mounts assure survival in hostile environments The heat generated by semi-conductors is extracted and dissipated by large heat sink fins for cool operation Protection: overvoltage, current limit; (set @ 105% of intermittent rating), thermal overload, and input/output fusing Thermally activated cooling fan on “CD” units Specifications: Nominal Input/VAC: 115/230     Maximum Input Current @115: 5.5 Maximum Input Current @230: 2.5 Output Amperage (Intermittent): 10 Output Amperage (Continuous): 4 Weight: 20 lbs. / 9.1 kg Case Size:H x W x D (inch): 5.7” x 4.8” x 16.3”Input Range105-125/210-250 VAC (selectable), 50-60 Hz; Derate to 50% output below 110 and 220 VACOperating TemperatureC.D. Units - 0-65 degrees C, Derate linearly from 100% @ 50 degrees C to 50% @ 65 degrees C thermal Shutdown @ 85 degrees C case temperatureDuty Cycle: Intermittent: 20 minutes max on time, 20% duty Continuous: 24 hours/day 100% Duty Options: Modify for use as a battery charger The output voltage is adjusted (see Output Voltage for range) Transfer relay for back-up battery in event of power failure (ERC option) Output Voltage: 24.5 VDC (Internally adjustable 21-27.5 VDC) Ripple: 70mV P-P (@ 110-125 / 220-250 VAC input) 1% Line and Load (@ 110-125 / 220-250 VAC input) Mechanical: Powder-coated aluminum heat sink case Front panel terminal block Heavy-duty mounting flange Conformal-coated PC board This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

    $2,114.00$1,492.50

  • Sale -16% Collinite Edgeless Microfiber Towels 80/20 Blend - 12-Pack [GPT12]

    Collinite Edgeless Microfiber Towels 80/20 Blend - 12-Pack [GPT12]

    Edgeless Microfiber Towels 80/20 Blend - 12-PackSoft and durable, multi-function removal towel for a wide variety of products. 80/20 blend, 16 x 16″ edgeless + tagless microfiber towel that’s both versatile and durable. Designed for both interior and exterior use, this soft, high-thread towel is suited for the removal of waxes, sprays, polishes, AND compounds. Quickly and easily removes dust, debris & material with high absorbency; minimizing streaks and making cleanups faster with fewer towel passes and less contact with surfaces. Use: REMOVAL OF ALL AUTOMOTIVE WAXES, POLISHES, DETAILERS & DRESSINGS (NO. 915, 855, 845, 520, 476, 390, 325, 360) REMOVAL OF ALL MARINE WAXES, POLISHES, DETAILERS & COMPOUNDS (NO. 925, 920, 885, 870 855, 850, 631, 435) DESIGNED FOR INTERIOR & EXTERIOR USE DESIGNED APPLICATION & REMOVAL FOR NO. 435, NO. 520 Do Not Use:APPLICATION OF WAXES, POLISHES, COMPOUNDS Specifications: Type: Tools & Accessories Box Dimensions: 5"H x 8"W x 8"L WT: 1.4 lbs

    $48.00$40.50

  • Sale -6% Collinite Black Applicator Sponge - 6-Pack [BSA6]

    Collinite Black Applicator Sponge - 6-Pack [BSA6]

    Black Applicator Sponge - 6-PackVersatile and durable applicator for both wax and detail spray use. The versatile detail spray applicator sponge features a soap bar shape designed to fit comfortably in your hand.Extra absorbent and an excellent choice for auto/marine/RV use. Effective solution to safely apply sprays and waxes. Extremely Durable – able to withstand numerous uses. Use: COMPATIBLE WITH THE FOLLOWING COLLINITE PRODUCTS AS AN APPLICATOR: AUTO WAXES -NO.845, NO. 476S, NO. 915 MARINE WAXES -NO. 925, NO. 885 NO.520 DETAILER NO.360 ALL NITE DRESSING NO.855 LEATHER AND VINYL WAX Do Not Use:NOT DESIGNED FOR REMOVAL OF PRODUCT; POLISHES, SPRAYS OR WAXES Specifications: Type: Tools & Accessories Box Dimensions: 3"H x 5"W x 10"L WT: 0.15 lbs

    $24.00$22.50

  • HUCK Performance Bucket - Tuxedo - White w/Black Handle [76174] HUCK Performance Bucket - Tuxedo - White w/Black Handle [76174]

    HUCK Performance Bucket - Tuxedo - White w/Black Handle [76174]

    Performance Bucket - Tuxedo - White with Black HandleYour everyday, disposable five-gallon bucket is constructed of an inexpensive, ordinary high-density polyethylene, the same material used to make milk jugs and sandwich bags. It’s cheap and readily available and a good choice for a low-cost, disposable product.The HUCK Performance Bucket is constructed of a proprietary blend of performance polymers known as SpryTech, specially formulated for extreme strength and durability, yet lightweight and with uncommon resistance to wear, temperature, and chemicals.Features: HUCK’s polymer blend offers excellent UV stabilization (won’t degrade when subjected to constant sunlight) BPA-free, so it is food-safe Gray HUCK label Specifications: Color: Tuxedo (white with black handle) Height (inch): 13 5/8″ Mouth diameter (inch): 11.5″ Weight: 3 lbs. Base Diameter (inch): 10.5″ Brochure (pdf)

    $99.95

  • HUCK Performance Bucket - Black n Tan - Tan w/Black Handle [87154] HUCK Performance Bucket - Black n Tan - Tan w/Black Handle [87154]

    HUCK Performance Bucket - Black n Tan - Tan w/Black Handle [87154]

    Performance Bucket - Black n' Tan - Tan with Black HandleYour everyday, disposable five-gallon bucket is constructed of an inexpensive, ordinary high-density polyethylene, the same material used to make milk jugs and sandwich bags. It’s cheap and readily available and a good choice for a low-cost, disposable product.The HUCK Performance Bucket is constructed of a proprietary blend of performance polymers known as SpryTech, specially formulated for extreme strength and durability, yet lightweight and with uncommon resistance to wear, temperature, and chemicals.Features: HUCK’s polymer blend offers excellent UV stabilization (won’t degrade when subjected to constant sunlight) BPA-free, so it is food-safe Woodgrain HUCK label Specifications: Color: Black N' Tan (tan with black handle) Height (inch): 13 5/8″ Mouth diameter (inch): 11.5″ Weight: 3 lbs. Base Diameter (inch): 10.5″ Brochure (pdf)

    $99.95

  • Sale -20% 303 Marine Touchless Sealant - 128oz [30399]

    303 Marine Touchless Sealant - 128oz [30399]

    Marine Touchless Sealant - 128ozHave you had trouble finding time to fully wax your car?  303® Touchless Sealant will save you hours! This Si02 formula is a completely TOUCHLESS quicker alternative to waxing your vehicle. Simply spray on, and rinse off – it’s that easy!  It only takes minutes to get that same water beading protection you get from a full wax, saving you hours spent in the garage.   It’s also great for those looking to prolong the time in between waxes, or ceramic coatings. Safe for clear coat, gel coat, fiberglass, plastics, windshields, and wheels too!Usage Directions:Wash your car out of direct sunlight while the surface is cool. While the surface is still wet and out of direct sunlight, spray a small amount of product evenly across the surface, treating one section of the vehicle at a time. Only a light mist of the product is needed. Immediately rinse the section off. You will see water beading on the surface, meaning it is now protected. Repeat the steps on all sections of the vehicle, and then dry thoroughly with a waffle weave drying towel or microfiber towel.Features: Provides superior water beading Protects against paint fading Lasts up to 2x longer than traditional wax! Simply spray on, and rinse! Also great for use on windshields and wheels! 128 fluid oz. 303 Touchless Sealant is safe to use on a variety of surfaces, such as:Paint Clear coat Wheels Glass Plastics Fiberglass Gel-coat Aluminium Hard plexiglass And more! Specifications: Type: Waxes & Polishes Box Dimensions: 5"H x 7"W x 10"L WT: 8.7 lbs UPC: 082043303997 Quick Guide (pdf)

    $84.99$67.99

  • Sale -6% Collinite 435 Black Streak Remover - Pint (16oz) [435]

    Collinite 435 Black Streak Remover - Pint (16oz) [435]

    435 Black Streak Remover - Pint (16oz)On deck all in one, easy-to-use No. 435 Black Streak Remover + Protector safely and effectively eliminates black streaks, tough stains, and freshwater spots from fiberglass surfaces. Quickly restores finish while leaving behind fast-bonding polymer surface protection. Safe for use on fiberglass, metal, and painted surfaces.Applications: Removes black streaks Removes tough stains Removes fresh water spots Provides protection as it cleans Designed for fiberglass, metal, and painted surfaces Tip: Always test the product first in a small, inconspicuous area to ensure the desired result. Specifications: Type: misc Box Dimensions: 3"H x 3"W x 10"L WT: 1.15 lbs

    $18.00$16.99

  • Sale -15% Black Oak 30" Yellow Lens Single Row LED Light Bar - Combo Optics - Black Housing - Pro Series 3.0 [30Y-S5OS]

    Black Oak 30" Yellow Lens Single Row LED Light Bar - Combo Optics - Black Housing - Pro Series 3.0 [30Y-S5OS]

    30" Yellow Lens Single Row LED Light Bar - Combo Optics - Black Housing - Pro Series 3.0Black Oak's 30 inch light bar may be small, but it is beyond powerful. Whether being installed in a vehicle grille, snow machinery, roof rack, or even a SxS, it gets the job done. The 30” yellow lens single row light bar cuts right through fog, dust, and snowy conditions. Also, this 30” light bar is a Combo Optic with a 5 Watt Osram.Black Oak has taken the LED game to the next level. The Pro Series 3.0 features top-of-the-line LED tech, boasting a 20% increase in lumens, making this series of lights one of the brightest on the market.Features: Combination Flood/Spot light pattern offers a superior lighting pattern 360° Ceramic Protection against UV, Salt Water & Corrosion 2 Stage Hydrex Seal Lock for IP69 protection and a fully submersible light bar Heavy-duty Dynamax housing for a 4x stronger frame Activities & Uses:  Bumper applications on vehicles  Snow machinery SxS or UTV Dust Lighting Roof rack fog lighting Technical Specifications: Total Wattage: 150W Amp. Draw: 10.3 LED Quantity: 30 Weight: 7.7 lbs. Raw Lumens: 19,800 Warranty: Lifetime IP Rating: IP69K     Dimensions with Mounting Bracket (Width x Height): 33" x 2.6" In the Box: 30” yellow lens single row light bar Complete wiring harness with fuse, relay, and switch Mounting brackets All hardware, ready to install! *Sold as an Individual Specifications: Housing: Black Length (Inches): 30" Box Dimensions: 6"H x 6"W x 35"L WT: 8.7 lbs UPC: 850044517602

    $705.00$599.25

  • Coleman CHILLER 28-Can Soft-Sided Backpack Cooler - Deep Ocean [2158118] Coleman CHILLER 28-Can Soft-Sided Backpack Cooler - Deep Ocean [2158118]

    Coleman CHILLER 28-Can Soft-Sided Backpack Cooler - Deep Ocean [2158118]

    CHILLER™ 28-Can Soft-Sided Backpack Cooler - Deep OceanMeet the CHILLER™ 28-Can Soft-Sided Backpack Cooler. Whether you’re bringing drinks to the game or keeping the fam fueled on a hike, this cooler’s easy and comfortable to carry thanks to adjustable and padded shoulder and waist straps. This cooler’s exterior is made from recycled polyester fibers, so you’ll help reduce your impact on the environment.Features: Portable: Adjustable padded shoulder and waist straps for easy transport; zippered front and inside mesh pockets for storing ice packs and other extras Recycled Fabric: Exterior fabric is made from recycled polyester fibers Leakproof: Welded seams prevent leaks Superior Ice Retention: TempLock™ Insulation keeps food and drinks cold for 12 hours or more Capacity: Holds up to 28 cans Specifications: Color: Deep ocean Weight (lbs): 2.75 Exterior Height (inches): 18.75 Exterior Length (inches): 12.5 Exterior Width (inches): 3.75 Capacity: 28 Cans Cooler Cup Holders: No Cooler Wheels: Yes Specifications: Color: Blue Box Dimensions: 4"H x 12"W x 18"L WT: 1.3 lbs UPC: 076501170757

    $41.50

  • RIGID Industries Q-Series Spot w/Amber Pro Lens [244293] RIGID Industries Q-Series Spot w/Amber Pro Lens [244293]

    RIGID Industries Q-Series Spot w/Amber Pro Lens [244293]

    Q-Series Spot with Amber Pro LensThe Q-Series, Amber PRO Edition was designed with off-roading in mind, but its versatility makes it well suited for use with power sports and general automotive. RIGID's Amber PRO Edition was developed specifically for situations with high dust, smoke, and other low-visibility conditions. The amber lighting provides superior performance in adverse lighting conditions thanks to the unique attributes of the human eye that make it easier to process light in longer wavelengths. This reduces glare, enhances definition, and improves contrast, allowing you to see farther than traditional white lighting. Own The Night with RIGID's Q-Series Amber Pro Edition LED lights. Features: Amber PRO Lens 9-36 VDC Operation Alloy Housing and Heatsink Reverse Polarity Protection Over/Under Voltage Protection IP68 Compliant - Dust/Water Ingress Pressure Equalizing Vent Patented Optics 50,000 Hr+ LED Lifespan Limited Lifetime Warranty Off-Road Use Only Specifications: Size (inch): 7" X 7"     Weight (Lbs): 3.20 Optics: Spot Watts: 123 Amp Draw: 8.8 Raw Lumens: 12672 Lux at 10m: 1554.4 Beam Distance at 1Lux: 394.3     Beam Distance at .25Lux: 788.5 Peak Beam Intensity(cd): 155440 Horizontal Beam Angle: 14.6 Product Comes With: Q-Series PRO Spot with Amber PRO lens Harness and switch Surface Mount Brackets Vibration isolators Hardware *Sold as an individual Specifications: Beam Pattern: Spot Housing: Black Length (Inches): 7" Box Dimensions: 5"H x 8"W x 13"L WT: 6.1 lbs UPC: 849774035562

    $545.99

© 2024 Safe Water, Powered by Safe Water

    • American Express
    • Apple Pay
    • Diners Club
    • Discover
    • Google Pay
    • Mastercard
    • PayPal
    • Shop Pay
    • Visa

    Login

    Forgot your password?

    Don't have an account yet?
    Create account