115-12-35CD Power SupplyThis super-rugged DC power supply is ideal for powering 12-volt communication and navigation equipment onboard commercial vessels where reliability is essential. The proven linear circuit design provides pure noise-free output and a long service life.Features:
Excellent Regulation and Ripple Spec (output voltage maintained within 1% under all rated line and load conditions)
Polyurethane conformal coated PC board and corrosion-resistant heavy-duty aluminum case with integral shock mounts assure survival in hostile environments
The heat generated by semi-conductors is extracted and dissipated by large heat sink fins for cool operation
Protection: overvoltage, current limit; (set @ 105% of intermittent rating), thermal overload, and input/output fusing
Thermally activated cooling fan on “CD” units
Specifications:
Nominal Input/VAC: 115/230
Maximum Input Current @115: 7.5
Maximum Input Current @230: 3.5
Output Amperage (Intermittent): 35
Output Amperage (Continuous): 35
Weight: 32 lbs. / 14.6 kg
Case Size:H x W x D (inch): 6.5” x 9.5” x 14.0”Input Range105-125/210-250 VAC (selectable), 50-60 Hz; Derate to 50% output below 110 and 220 VACOperating TemperatureC.D. Units - 0-65 degrees C, Derate linearly from 100% @ 50 degrees C to 50% @ 65 degrees C thermal Shutdown @ 85 degrees C case temperatureDuty Cycle:
Intermittent: 20 minutes max on time, 20% duty
Continuous: 24 hours/day 100% Duty
Options:
Modify for use as a battery charger
The output voltage is adjusted (see Output Voltage for range)
Transfer relay for back-up battery in event of power failure (ERC option)
Output Voltage:
13.6 VDC (internally adjustable 12.6-14.5 VDC)
Ripple: 40mV P-P (@ 110-125 / 220-250 VAC input)
1% Line and Load (@ 110-125 / 220-250 VAC input)
Mechanical:
Powder-coated aluminum heat sink case
Front panel terminal block
Heavy-duty mounting flange
Conformal-coated PC board
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
4 12V Battery Parallel Quick Connect System4 12V parallel Quick connect Battery system for extended weekend RV or off-the-grid fun. 6 gauge marine grade tinned wire with 60 to 110 amp capability.The Connect-Ease RCE412VRV allows connecting four 12-volt batteries in parallel to provide users with a much longer runtime when away from any wired, plug-in power source. Connect-Ease designed this (4) 12V parallel system specifically with RV and off-grid enthusiasts in mind whose power requirements are much greater than the limited runtime a single 12V battery can provide.Features:
Plug & Play Connections are Lithium Compatible
The serious off-roader needs a lot of power camping rig Dispersed Camping takes plenty of power.
Handles 60 to 240 amps of DC power
Lithium Compatible
These inverters provide AC power source onboard trucks, RVs and boats. Featuring high surge capability, they are ideal for users who may need to power multiple loads such as appliances, power tools and other onboard electronics at the same time. The NEW XPower Inverters are certified to CSA standard C22.2 No. 107.1-01 and UL 458.Mobile Power for Trucks, RVs and BoatsXPower Inverters connect easily to 12 volt batteries to provide AC power for a variety of medium to heavy duty applications. Designed for easy installation and operation, the XPower inverters provide a reliable source of power onboard trucks, RVs and boats to run home appliances, consumer electronics, entertainiment systems, power tools, office equipment and much more. They are also suitable for small contractors who need to operate handheld power tools from their van or pick-up truck. All models meet the stringent UL458 regulatory requirements. Product Features:
Portable power for AC products
Two GFCI AC receptacles for connecting multiple loads
High surge capacity for products that require more power to start
High efficiency - converts virtually all the battery's available power to AC
Mounting brackets for convenient installation
Heavy duty stud connectors
Remote on/off switch included
Protection Features:
Overload and over temperature shutdown
Over voltage protection (15.0 VDC)
Low voltage alarm (11.0 VDC)
Low voltage cut-out (10.5 VDC)
Product Applications:
Household Appliances: compact microwave ovens, bread makers, food processors, small bar refrigerators, small vacuum cleaners, fluorescent and incandescent lights, sewing machines and fans
Handheld Power Tools: drills, jigsaws, sanders and buffers
Entertainment Electronics: televisions, VCRs, video games, stereos, musical instruments and satellite equipment
Office Equipment: computers with 17" monitors, facsimile machinesWARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
DC Connection Type: Hardwire
GFCI: Yes
Outlet Qty: 1 Duplex GFCI
Inverter Surge Rating: 3000w
Inverter Input Voltage: 12v
Waveform: Modified Sine Wave
AC Connection Type: Hardwire
Inverter Output Voltage: 115v +/- 5%
Inverter Cont. Output Wattage: 1500w
Box Dimensions: 6"H x 8"W x 17"L WT: 7.2 lbs
UPC: 715535896478
Quick Guide (pdf)Owner's Manual (pdf)Brochure (pdf)
PRO Series InvertersPerformance inverters designed for RVs and boatsDesigned for RV and marine electrical systems that already have a battery charger or generator installed, Xantrex PRO Inverters deliver modified sine wave power for small appliances, TVs, and other onboard electronics from a battery bank. DescriptionThe Xantrex PRO Series Inverters are the perfect complement to generators when shore power is unavailable, to quietly and efficiently provide household power when needed. The PRO Series design is both user friendly and versatile. These inverters feature a detachable, digital remote control to display precise inverter, AC source and battery status information from one convenient location. A built-in transfer switch automatically detects when generator or shore power status changes to ensure power is always available. The 1000W is designed for demanding RV and marine conditions. They meet FCC Class B regulations to eliminate interference potential with other electronics, while UL 458 certification means they meet strict RV and marine safety standards. Versatile enough to be mounted either horizontally or vertically, these inverters can be easily installed to fit into any compartment. Conformal coated boards also minimize the chance of problems from moist operating conditions. Performance Features
Inverter easily powers TVs, small appliances, and other electronics
Built-in 15A circuit breaker to protect GFCI connected loads
Up to 25A pass through for hardwired loads
Digital remote control displays power output, AC source and battery voltage
Detachable remote control can be mounted wherever convenient
Conformal coated electronics provide moisture resistance
Designed to be hard-wired using a terminal strip or by connecting AC through a GFCI receptacle (included)
Protection Features
Battery over-voltage and under-voltage protection
Over temperature shutdown
Automatic overload protection
Short-circuit protection
Ground fault protection
WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
DC Connection Type: Hardwire
GFCI: Yes
Inverter Input Voltage: 12v
Outlet Qty: 1 Duplex GFCI
Inverter Surge Rating: 2000w
Waveform: Modified Sine Wave
Inverter Output Voltage: 120v
AC Connection Type: Hardwire
Inverter Cont. Output Wattage: 1000w
Box Dimensions: 6"H x 10"W x 13"L WT: 10 lbs
UPC: 715535113520
Owner's Manual (pdf)Brochure (pdf)
Freedom XC Pro 2000 Inverter/Charger - 2000W - 100A - 120V - 12V2000 Watt pure sine wave inverter with 100 Amp built-in lithium-ion battery charger and transfer switch in a compact, lightweight footprint. Configure and monitor system performance via Bluetooth app available on the optional Bluetooth remote panelThe Freedom XC PRO inverter/charger, supporting RV-C and J1939 protocols, is the most versatile and flexible AC power solution in the market today. It also features a 100 amp (2000W model) / 150 amp (3000W model) battery charger and offers all of the configurable features of the Freedom XC series inverter/charger in a compact, light weight package. It cranks out full output in invert or charge mode from -4°F (-20°C) - 104°F (40°C) for operation in all climate temperatures. The extended surge rating enables compressor loads such as an A/C or a fridge to start reliably.Features:
Extended Surge Rating: Surges to 2X continuous power for 5 seconds for motor loads
True Sine Wave AC Power: For operation of sensitive and motor loads
Ignition Control: Feature to turn inverter on/off via a 12 VDC signal and to minimize battery drain by switching the inverter off when the ignition key is turned off
Wide 10-18 VDC Input Range: Ensures inverter operation on high voltage alternators found on many new vehicle chassis
Built-in 50A AC Transfer Relay: Senses when outside AC Power is present and transfers the load from the inverter to the source of incoming power (shore or generator)
Power Factor corrected Multi-Stage: Utilizes less shorepower when charging batteries. This frees up more usable AC power for running electrical devices and appliances
Programmable: Configurable 3 stage temperature compensated battery charge algorithm for optimal charging of almost any battery type up to 18V
Specifications:
Continuous Power: 2000 Watts
Continuous Current: 16.7 Amps
Surge Power: 4000 Watts
Frequency: 60 (or 50) Hz (selectable)
Output Voltage: 108, 110, 120 Volts AC (selectable)
Input Voltage: 12 Volts DC nominal
Safety: ETL listed to CSA 107.1, UL458 (UL458 Marine Supplement with optional drip shield, part number 808-1050)
Dimensions: 15.4" x 10.8" x 4.9"
Unit weight: 17.1 lbs
2 year warranty
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
PROwatt SWInline Transfer RelayAn easy to mount 15A Inline Transfer Relay provides switching between shorepower and inverter AC source. It comes with a power plug for convenient connection to the inverter GFCI and a hardwire cord for the AC input and output interface. It is available as an accessory to the Prowatt SW product line.WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and Di-isodecyl Phthalate (DIDP) which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)
Gold Class™ Rich Leather Spray - 15.2 oz.Quickly and easily pamper and protect your leather with Meguiar's® Gold Class™ Rich Leather 3-in-1 Spray. This gentle, effective formula cleans, restores, and enriches leather for a luxurious appearance and helps to prevent premature wear, such as drying and fading. With the finest conditioners and premium ingredients Gold Class™ Rich Leather cleans, conditions, and protects fine leather in one quick and easy step.Features:
Cleans, conditions, and protects in one easy step for complete leather care
Cleaners gently remove dirt and grime while UV protection helps to prevent premature aging and fading
Premium conditioners and aloe nourish leather for a supple look and feel
Convenient spray formula is gentle and effective at cleaning, restoring leather, and helping to prevent premature wear, drying, and fading
Non-greasy, non-whitening formula
Specifications:
Type: Leather
Box Dimensions: 2"H x 4"W x 11"L WT: 1.25 lbs
UPC: 070382161095
Flex TrimLength: 25'"A": 1/2""B": 5/8"Color: WhiteTACO Metals supplies quality trim that is designed to protect boat interiors and exteriors from the harsh marine environment.Trim & MouldingTrim and moulding products provide finish, protection and structural integrity. TACO trim and moulding products are the best in the industry and are used extensively throughout boat interiors and exteriors.MaterialsDepending on the product line, TACO's trim and moulding products are offered in aluminum, vinyl and specially formulated rubber compounds. TACO insists on using prime billet 6000 series aluminum alloys to ensure superior structural strength, precise bending and long-lasting performance. Vinyl and plastic products are made from prime resin and warranted for 5 years.
Covers unfinished edges and follows almost any contour or radius
Made of flexible PVC
Integrated interior aluminum clip and gripping tongue ensures a better fit
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
Marine Fabric Guard - 32oz *Case of 6*303 Fabric Guard is the only product recommended by fabric manufacturers to restore lost water repellency to fabrics. Resist water, even when you’re on the water. 303 Fabric Guard creates a powerful shield to greatly increase repellency and protect against oil and water- based stains. Spray it on outdoor leather seats, boat covers, awnings, Dacron sails and more. When applied to clean and dry fabrics, 303 Fabric Guard restores lost water and stain repellency to straight-from-the-factory levels. Keep all your favorite fabrics crisp and clean for years to come.Features:
Fabric protector spray that strengthens and restores lost water repellency for marine fabrics
Safe for synthetic and natural fibers in marine environments
Protects against both water-based and oil-based stains
Does not alter fabric color, feel, flammability or breathability
Recommended by leading outdoor fabric manufacturer
Made in the U.S.A.
*Sold as a Case PackWARNING: This product can expose you to chemicals including Ethylbenzene which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications:
Type: Fabric & upholstery
Box Dimensions: 3"H x 4"W x 11"L WT: 10.8 lbs
Marine Fabric Guard - 32oz303 Fabric Guard is the only product recommended by fabric manufacturers to restore lost water repellency to fabrics. Resist water, even when you’re on the water. 303 Fabric Guard creates a powerful shield to greatly increase repellency and protect against oil and water- based stains. Spray it on outdoor leather seats, boat covers, awnings, Dacron sails and more. When applied to clean and dry fabrics, 303 Fabric Guard restores lost water and stain repellency to straight-from-the-factory levels. Keep all your favorite fabrics crisp and clean for years to come.Features:
Fabric protector spray that strengthens and restores lost water repellency for marine fabrics
Safe for synthetic and natural fibers in marine environments
Protects against both water-based and oil-based stains
Does not alter fabric color, feel, flammability or breathability
Recommended by leading outdoor fabric manufacturer
Made in the U.S.A.
*Sold as an Individual WARNING: This product can expose you to chemicals including Ethylbenzene which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications:
Type: Fabric & upholstery
Box Dimensions: 3"H x 4"W x 11"L WT: 1.8 lbs
UPC: 082043006508
476s Super DoubleCoat Auto Paste Wax - 9ozA Mr. Collins original, this classic carnauba/polymer blend is also Collinite’s most durable. Holds up month after month against harmful outdoor corrosives; UV, rain, snow, salt, dust, dirt, grime, bugs, staining, and more. Ideal as a winter wax when both lasting shine and all-season/all-conditions protection are equally crucial.Features:
Provides high gloss shine
The highest degree of durability, with 7-10 months of weather protection
Applications:
For hand & dual action, buffers use
476s contains the highest concentration of polymer protection to withstand the harshest elements for the longest period of time. For this reason, we recommend 476s as a protective coating prior to the winter months.
While 476s is a traditional hard paste, it can be easily applied and removed. We recommend applying a thin layer to a small section (2 x 2 feet), and removing the wax once it comes to a haze. Typically, this takes anywhere from 1-3 minutes.
*Sold as an individual Specifications:
Type: Waxes & Polishes
Box Dimensions: 2"H x 2"W x 4"L WT: 0.6 lbs
UPC: 638234004763