Automotive/RV

NTX-1000-12 Pure Sine Wave Inverter - 1000WThe NTX Series Pure Sine Wave Inverters are FCC certified to ensure no electrical interference when operating near sensitive equipment. This series has a single variable speed temperature and load-controlled fan for quiet operation. Features: Pure Sine Waveform of AC output voltage High efficiency Compact size and low weight Very low idle current  Easily start high surge loads with Samlex HypersurgeTM technology LCD Remote Control Model NTX-RC included Low noise load and temperature controlled variable speed fan Wide input voltage range WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Owner's Manual (pdf)Brochure (pdf)

Read more less

2000W Pure Sine Wave Inverter - 24VPST Series (120 VAC)This high efficiency DC-AC inverter converts 24 Volts DC to 2000 Watts of pure sine-wave AC power at 120 Volts, 60 Hz. The unit comes with pin-type battery cable lugs. Features include overload protection, low battery alarm / shut down, low idle power draw of less than 1 Amp. AC power is available from a NEMA-20R GFCI duplex outlet on the front panel. Safety certified to UL standards.Features: High efficiency Can be hard wired Temperature controlled cooling fan – reduces energy consumption Low interference Wide operating DC input range: 21.4 - 33.0 VDC Commercial grade design suitable for heavy duty loads, long periods of continuous operation & for emergency back up UPC – Universal Protection Circuit: low voltage, over voltage, over temperature, over load and short circuit Low idle power draw Dual GFCI protected AC outlets Optional remote control (sold separately): Model RC-200 Safety certified to UL standards, FCC compliant Specifications: Input: 24 VDC Output: 120 VAC Watts: 2000 Surge: 3500 Watts Remote Control: RC-200 sold separately Weight: 15.6 (lbs) Weight: 7.1 (kg) Dimensions: 10.35 x 18.43 x 4.16 (in) Dimensions: 263 x 468.2 x 105.6 (mm) Safety: ETL to UL Standard Warranty: 2 Year Limited Applications: Service vehicles Mobile Offices Boats Recreation Vehicles, Camping Telecommunication Field work / Construction sites Solar power systems Emergency backup power Home electronics: TV, VCR, video games Computers, printers WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Inverter Cont. Output Wattage: 2000w Outlet Qty: 2 Duplex GFCI Inverter Input Voltage: 24v Waveform: Pure Sine Wave Box Dimensions: 6"H x 12"W x 21"L WT: 17.8 lbs UPC: 622988072222 Owner's Manual (pdf)Brochure (pdf)

Read more less

600W Pure Sine Wave Inverter - 12VSSW SeriesSSW Series high efficiency pure sine wave inverters convert 12 VDC to 115 VAC at an output frequency of 60 Hz. Newly designed, these compact and lightweight models feature soft start technology and 2X the surge. Economically priced for reliable pure sine wave power.Includes 2 three prong outlets and a USB charging port.Features: USB Charging Port 2 three prong outlets Comes with battery clamps High performance, high surge power (2X) True sine wave output for sensitive loads Economically priced Samlex “Soft Start” & “Low Interference” technology Universal Circuit Protection: thermal, battery, overload, short circuit & earth fault Cool surface technology Specifications: Input: 12 VDC Output: 115 VAC Watts: 600 Surge: 1200 Watts Outlets: 2 Fuse: 80 Amps Weight: 2.4 (lbs) Weight: 1.1 (kg) Dimensions: 6.10 x 10.0 x 2.32 (in) Dimensions: 15.5 x 22.5 x 5.9 (cm) Safety: ETL Warranty: 2 Year Limited Applications: Service vehicles Mobile Offices Boats Recreation Vehicles, Camping Telecommunication Field work / Construction sites Solar power systems Emergency backup power Home electronics: TV, DVD, video games WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Inverter Cont. Output Wattage: 600w Outlet Qty: 2 Duplex GFCI Inverter Input Voltage: 12v Waveform: Pure Sine Wave Box Dimensions: 4"H x 8"W x 12"L WT: 3.7 lbs UPC: 622988073717 Owner's Manual (pdf)Brochure (pdf)

Read more less

High Performance Waterproof Grease - (2)2oz Tube - Non-Hazmat, Non-Flammable & Non-Toxic *Case of 6*Corrosion Block Grease is designed to provide maximum protection under severe conditions. Its formulation provides both high and low temperature performance, increasing the service life of critical components. Corrosion Block Grease strongly resists water wash out and provides superior protection against rust and corrosion.Corrosion Block Grease out performs lithium and most synthetic greases and meets or exceeds requirements for NLGI Service Classification GC-LB (automotive wheel bearing and chassis lubricants), which is based on ASTM D4950 performance requirements.Applications: All Industries: Wheel Bearings, Chassis, Winches, Windlasses, Wiring HarnessesFeatures: Waterproof Multi grease compatible Excellent thermal / oxidative stability Resists bleeding or melting at high temperatures Suitable for sealed for life applications Use in electrical applications that require grease Workplace safe & environmentally friendly Out performs competitive grease 5:1 Specifications: Type: Grease Box Dimensions: 2"H x 3"W x 7"L WT: 3 lbs

Read more less

Liquid 4-Liter Refill - Non-Hazmat, Non-Flammable & Non-ToxicCorrosion Block is a clean fluid that actively protects metal using advanced polar bonding chemistry.  Synthetic additives in Corrosion Block completely penetrate corrosion cells…replacing the salt water which is then allowed to evaporate.  Corrosion Block’s hydrophobic film remains to further protect the metal acting like an “OFF SWITCH” for corrosion. Unlike waxy products Corrosion Block then leaves a clean clear moisture proof/hydrophobic film to prevent new corrosion formation. deeply penetrating into joints, connectors and around fasteners. Features: Formulated to KILL CORROSION ON CONTACT from completely submerged, to equipment affected by high moisture content in the air Corrosion Block is a clean fluid that actively protects metal and electronics using advanced polar bonding chemistry Synthetic additives in Corrosion Block completely penetrate corrosion cells...replacing the salt water which is allowed to evaporate A hydrophobic film remains to further protect the metal acting like an "OFF SWITCH" for corrosion Corrosion Block is safe; it is non-toxic and non-flammable, also the propellant used in our aerosol products is non-flammable Used worldwide to protect electrical and mechanical equipment in "Safety First" situations such  as Mining, Power Generating Stations, Fuel Depots, Gas and Petroleum refineries and more Protects: Switches Pressure Gauges Motor Operated Valves Terminal Strips Circuit Breakers Locks  Electronics Battery Terminals Running Lights Fuel Tanks Fuse Panels Connectors Alternator Leads Reefer Unit Wheels & Hubs Engines GPS Systems  Specifications: Type: Corrosion Protection Box Dimensions: 4"H x 7"W x 12"L WT: 8.05 lbs UPC: 770153200045 Brochure (pdf)

Read more less

Ultra Polishing Wax - 1 Gallon *Case of 4*Meguiar’s D166 Ultra Polishing Wax is an all-in-one cleaner wax that gives you considerable defect removal power while leaving a layer of durable wax protection. Our super-micro-abrasive technology provides a quick and uniform cut to remove below-surface defects including swirls, light to moderate oxidation, light scratches, water spots, stains and other blemishes. D166 also leaves a durable blend of carnauba wax, synthetic polymers and silicones, while polishing compounds clean paint quickly and gently. This versatile cleaner polish can be used with both foam and microfiber pads and can be applied by hand, dual action polisher or rotary buffer, giving you multiple application options. Save time and money with Meguiar’s most advanced one-step cleaner wax solution.Features: Efficient cleaner wax delivers significant cleaning ability and durable wax protection in one quick and easy step Super-micro-abrasive technology provides a quick, consistent cut for below-surface defect removal including swirls, light to moderate oxidation, light scratches, water spots, stains and other blemishes Polishing compounds clean paint quickly and gently while applying a durable blend of carnauba wax, synthetic polymers and silicones This versatile cleaner polish can be used with both foam and microfiber pads and can be applied by hand, dual action polisher or rotary buffer, giving you flexible application options Meguiar’s most advanced one-step cleaner wax solution saves you time and money while delivering brilliant results Specifications: Type: Waxes & Polishes Box Dimensions: 5"H x 7"W x 12"L WT: 35.2 lbs

Read more less

PT-14W Battery ChargerNewmar’s Phase Three Series Battery Chargers employ “Smart” battery charging technology for 12-volt systems aboard marine applications including workboats, military vessels, commercial vessels, and recreational craft. This charger interacts with batteries, providing the optimum three-stage charge process for fast recovery and conditioning, maximizing performance, and extending battery life.A selector switch adjusts output voltage to adapt to gel-cell, flooded lead-acid, or AGM battery types. An optional temperature compensation sensor also adjusts output for ideal voltage based on changes in the batteries’ ambient temperature. This model is housed in a rugged stainless-steel case with a durable white powder coat finish, and the internal circuitry is polyurethane-coated for maximum corrosion resistance.Features: “Smart” circuitry provides three-stage charging – bulk, absorption, float Gel-Cell/Flooded Lead-acid/AGM battery type switch selects optimum charge/float voltages Multiple isolated output banks; ammeter indicates total output current. (Except PT-7) The optional sensor adjusts output voltage based on battery temperature. (Except PT-7) Current limiting prevents damage from overloading Clean well-regulated output can be used as a power supply; can power loads directly without a battery in line Built to last – rugged stainless-steel case with a durable white powder coat finish with an optional drip shield and marinized internal circuitry Protection: Current Limiting, Thermal Protection, Forced Air Cooling, Drip Shield ABS-type approval for battery charging and power supplies Specifications: Input VAC (50-60 Hz.): 85-264     Input Amps @ Full Load: @ 115 VAC: 2.8, @ 230 VAC: 1.4  P.F. Rating: .93@230V and .98@115V Max Output Amps: 14 Output Banks: 3 Battery Capacity (Amp-Hours): 28-140     Operating Temp. Rating Reference: T-2 Case Size Reference: A-2 Case Size (H x W x D): 11.2A x 7.7 x 4.75A inches (31.8A x 19.6 x 12.1A centimeters) *Note with Dripshield installed A add 1.1” (2.8 cm) to height and .92” (2.3 cm) to depth Weight Lbs./Kg: 8/4 Optional Temp. Sensor Model: TCS-12/24     Remote Panel Model: RP Equalize Option: Yes Output Indicator Reference: M-3 Compliance Reference: CG, CE     Temperature Rating References: Temperature: -10 degrees C to +60 degrees C     Derate Linearly From 100% @ 40 degrees C to 60% @ 60 degrees C Nominal Output Voltages at Gel/Flooded Switch Settings (without Temperature Compensation): Gel-Cell: 14.0 VDC Charge @ 50% load and 13.6 VDC Float @ .5 amp load Flooded/AGM: 14.2 VDC Charge @ 50% load and 13.4 VDC Float @ .5 amp load Compliance References: CG: USCG CFR 183.410 (Ignition protected) CE: Carries the CE mark ABS: PT Series meets SVR 2009 4-8-3/5.9, Under 90 meters Rules 2006 4-6-4/7.19, and HSNC 2007 4-8-3/5.13. Options:Remote Panel, model RP, for use with all models except PT-7 and PT-40U (LEDs indicate the charger output stage. Manual re-initialization of a three-stage charge cycle. With 25′ of cable. Panel dimensions: 3″ H x 4.75″ W)This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Charger Input - Voltage: 115/230v Charger Output - Amps: 14a Charger Output Voltage: 12v Charging Banks: 3 Inverter Input Voltage: 115/230v Inverter Output Voltage: 115/230v Outlet Qty: Hardwire Portable: No Box Dimensions: 11"H x 11"W x 16"L WT: 9.5 lbs Quick Guide (pdf)Owner's Manual (pdf)

Read more less

Lanocote Rust & Corrosion Solution - 16 oz. LanoCote works on these five basic principles: displaces water, absorbs corrosion, forms moisture barrier, penetrates and high lubricity. LanoCote is extremely effective in preventing and stopping corrosion on all types of metals under all environmental conditions. Formulated to withstand salt water marine conditions, LanoCote is particularly useful in preventing thread seizure due to all types of corrosion on boats and machinery.Applied during assembly, LanoCote will greatly assist in easy dismantling years later. An example would be anchor shackles which are regularly immersed in salt water. LanoCote also combats galvanization where dissimilar metals are fastened together, such as stainless steel fittings on alloy masts etc. Features: Prevents Thread Freeze-up Combats Galvanic Reaction of Dissimilar Metals Seals Porous Surfaces Neutralizes Acids, Alkalies, & Salts Prevents Corrosion on Electronic Contacts Specifications: Type: Corrosion Protection Box Dimensions: 4"H x 4"W x 4"L WT: 0.95 lbs UPC: 028026136268

Read more less

PT-24-95U Battery Charger“Smart” marine battery charging technology for 24-volt systems aboard workboats, military vessels, commercial vessels, and recreational craft. This charger interacts with batteries, providing the optimum three-stage charge process for fast recovery and conditioning, maximizing performance, and extending battery life.A selector switch adjusts output voltage to adapt to gel-cell, flooded lead-acid, or AGM battery types. An optional temperature compensation sensor also adjusts output for ideal voltage based on changes in the batteries’ ambient temperature. All models are housed in a rugged stainless steel case with a durable white powder coat finish, and the internal circuitry is polyurethane coated for maximum corrosion resistance.Features: 24-volt model “Smart” circuitry provides three-stage charging – bulk, absorption, float Gel-Cell/Flooded Lead-acid/AGM battery type switch selects optimum charge/float voltages Multiple isolated output banks; ammeter indicates total output current The optional sensor adjusts output voltage based on battery temperature Current limiting prevents damage from overloading Use as a power supply; can power loads without a battery in line Built to last – rugged stainless steel case with a durable white powder coat finish with an optional drip shield and marinized internal circuitry Protection: Current Limiting, Thermal Protection, Forced Air Cooling, Drip Shield Install in conjunction with PT-MCU for additional control and monitoring ABS-type approval for battery charging and power supplies Specifications: Input VAC (50-60 Hz.): 90-264 Input Amps @ Full Load: @ 115 VAC: 26, @ 230 VAC: 14 Power Factor: .98@115V and .95@230V Max Output Amps: 95 Output Banks: 3 Battery Capacity (Amp-Hours): 180 – 950 Operating Temp. Rating Reference: T-5 Case Size Reference: A-5 Case Size (H x W x D): 17.5E x 12 x 7.2E inches (44.5E x 30.5 x 18.3E centimeters) *Note with Dripshield installed E add 2” (5.08 cm) to height and 1” (2.54 cm) to depth Weight Lbs./Kg: 24.5/11 Optional Temp. Sensor Model: TCS-12/24             Remote Panel Model: RP Compliance Reference: EN, CE, ABS Temperature Rating References: Temperature: -20 degrees C to +70 degrees C Derate Linearly From 100% @ 50 degrees C to 50% @ 70 degrees C Nominal Output Voltages at Gel/Flooded Switch Settings (without Temperature Compensation): Gel-Cell: 28.0 VDC Charge @ 50% load and 27.2 VDC Float @ .5 amp load Flooded/AGM: 28.4 VDC Charge @ 50% load and 26.8 VDC Float @ .5 amp load Compliance References: UL: UL 1950 (per DNB report) CG: USCG CFR 183.410 (Ignition protected) EN: EN 60335-1 CE: Carries the CE mark ABS: PT Series meets SVR 2009 4-8-3/5.9, Under 90 meters Rules 2006 4-6-4/7.19, and HSNC 2007 4-8-3/5.13. Options:Remote Panel, model RP, for use with all models except PT-24-20U, PT-24-60, and PT-32-25 (LEDs indicate charger output stage. Manual re-initialization of three-stage charge cycle. With 25′ of cable. Panel dimensions: 3″ H x 4.75″ W)This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Charger Input - Voltage: 115/230v Charger Output - Amps: 95a Charger Output Voltage: 24v Charging Banks: 3 Inverter Input Voltage: 115/230v Inverter Output Voltage: 24v Outlet Qty: Hardwire Portable: No Box Dimensions: 12"H x 17"W x 26"L WT: 31.5 lbs Quick Guide (pdf)Owner's Manual (pdf)

Read more less

RitchieSport CompassFeatures: 2″ (51 mm) Direct-Reading, High Visibility Dials Two-Sided, Self-Adhesive Mounting Pads Included Reversible Bracket allows a mounting range of over 300 degrees from overhead, through angled and vertical mounts to horizontal surfaces These mounting position options and your choice of mounting hardware permit mounting on everything from windshield or supporting frame structures, to slanted dashboards and consoles, to almost any flat, angled or vertical surface Internal Green Night Lighting High Temp Composite Construction for Extended Operating Range Hardened Steel Pivot and Sapphire Jewel Movement Built-in Compensators Exclusive 5-Year Ritchie Warranty Approx. Shipping Weight: 5 oz. (142g)Notes:Comes standard with 12v Green LED lighting.For all X-10's built between 1991 and 1999 use the part number RS-0004 XSP for replacement lighting. Specifications: Backlight: Yes Lubber Lines: Yes Mounting Style: Bracket Read: Front Box Dimensions: 3"H x 4"W x 5"L WT: 0.25 lbs UPC: 010342170613 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

Suction Cup with Magnetic Mount f/dezl™780 LMT-S & dezlCam™785 LMT-SMount your compatible device while you navigate with this suction cup mount. The powered magnetic mount charges your device while you drive. Simply suction your mount to the windshield or any smooth, flat surface. Includes suction cup mount and magnetic mount.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

The Grip-iT Device Holder Compatible with all models of *Apple iPods, including the iPod mini, Mobile phones,Iphone 6 Plus, Satellite Radios, PDA's, Portable Mp3 Players and Handheld GPS units.*Not compatible with iPod Nano. Provides a secure mounting option with easy installation. Adjustable Arms open to 4.5" wide to accommodate wide range of mobile devices. Arms also adjust to allow easy reach of device button controls. Mounts to air conditioning/heating vent in your vehicle and keeps your device secure. Made of durable ABS plastic that holds up to wear and tear. The PH-Grip-iT universal holder is designed for portable mobile electronics. The included Rotating Air Vent Mount makes for easy mounting to the louvers of your vehicles air vent to provide a stable, secure, and easily accessible mounting solution for your portable device.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)

Read more less