Best Selling Products

NMEA 2000 Engine Monitoring Unit - Analog to NMEA2000 Engine GatewayShare engine information on the NMEA 2000 bus.The Actisense EMU-1 is a specialized analogue to NMEA 2000 Gateway which converts data from analogue engine gauges/senders into NMEA 2000 data. The EMU-1 enables the sharing of engine data throughout the NMEA 2000 bus. It digitizes analogue engine sensors, enabling NMEA 2000 display devices to monitor the connected engine(s) on a vessel.The EMU-1 can monitor vital engine parameters such as temperature, pressure RPM and fluid levels from up to two engines.The EMU-1 has a PC-based configuration tool that allows the settings inside the EMU-1 to be changed to best suit the engine it is working with, making it a flexible solution for many engine makes and models.An Actisense PC to NMEA 2000 Gateway (NGX-1/NGT-1) is required to configure the EMU-1.The NGX-1 or NGT-1 must be used to update the firmware, connect the Toolkit and display data on a PC for diagnostic and information purposes, using NMEA Reader. Please visit the NGX-1 page and/or NGT-1 page for product details.Features: Enables analogue signals to be converted to NMEA 2000 messages Convert signals from up to two engines (that share a common ground) with a single EMU-1 6 gauge / parameter inputs 4 alarm inputs 2 additional auxiliary inputs 2 Tacho inputs Customized IP65 case Diagnostic LED’s Wide power compatibility of 9 to 35VDC No need to change an existing engine Easy installation Easy to configure to suit the connected engine Connect signals from fluid level gauges (that share a common ground with the engine) to NMEA 2000® Optional DIN rail mounting kit available Total engine hours are logged by the monitoring of engine Tach (RPM) input Technical Specifications:Power Supply Supply Voltage - 9 to 35VDC Supply Current - Typically < 25mA @ 12VDC Supply Protection - Continuous reverse polarity protection and load dump protection (meets SAE J1113) Supply Connector - Pluggable 2-way screw terminal, 3.5mm pitch Supply Voltage (NMEA 2000 Port) - 9 to 29VDC Supply Current (NMEA 2000 Port) - < 20mA @ 12VDC from NMEA 2000 bus Load Equivalent Number (LEN) - 1 Supply Protection (NMEA 2000 Port) - Continuous reverse polarity protection and overvoltage protection to 40V NMEA 2000 Port – In/Out Compatibility - Fully NMEA 2000 certified Galvanic Isolation - 2500V input to ground, 1500V output to ground using ISO-Drive Speed / Baud Rate - 250kbps NMEA 2000 Connector - M12 male (A coded) connector Gauge Inputs Voltage Range - 0 to 35VDC Input Impedance - > 50kΩ Sender Feed - 0, 4 or 18mA Accuracy - <= 2% Input Connector - Pluggable 6-way screw terminal, 3.5mm pitch Input Protection - Overvoltage protection to ±40V Alarm Inputs Voltage Range - 0 to 37VDC Input Impedance - > 50kΩ Threshold Voltage - Configurable, default is 5V Alarm Polarity - Configurable, default is alarm on low input Accuracy - <= 2% Input Connector - Pluggable 4-way screw terminal, 3.5mm pitch Input Protection - Overvoltage protection to ±40V Tacho Inputs Voltage Range - ±3 to ±60V Input Impedance - > 100kΩ to ground Input Pulse Range - 4 to 50,000Hz Accuracy - <= 1% Sender Compatibility - Ignition coil, alternator (“W”, “R” or “AC”) terminal, hall effect, VR or inductive sender Threshold - Automatically adjusts to signal level Input Connector - Pluggable 4-way screw terminal, 3.5mm pitch Input Protection - Can withstand an ignition pulse to ±500V Engine LogEngine Hours - 2 separate engine hour logs internally connected to the tacho Inputs. Hours are logged when RPM is present, stored in non-volatile memoryMechanical Housing Material - Polycarbonate Protective Lid Material - Polycarbonate Sealing Materials - Expanded silicone foam gasket, closed cell polyurethane splash guard and ePTFE waterproof vent Dimensions - 127mm (L) x 112mm (W) x 48mm (H) Weight - 250g Mounting - 4 x 3.5mm lugs to allow panel mount with self tapping s/s screws (included), optional DIN Rail mount available on request Approvals and Certifications EMC - EN 60945 (sections 9 & 10) Environmental Protection - IP66 (PCB housing) Operating Temperature - -20°C to +55°C Storage Temperature - -30°C to +70°C Recommended Humidity - 0 – 93% RH Guarantee - 3 years This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Data Interface: NMEA 2000 Box Dimensions: 3"H x 6"W x 9"L WT: 1 lbs UPC: 5060998710331 Owner's Manual (pdf)Brochure (pdf)

Read more less

Transom Mounting Bracket for P66 Transducer - 2004 & upThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Type: Mounting Brackets Box Dimensions: 2"H x 3"W x 4"L WT: 0.2 lbs UPC: 801769004656

Read more less

0183 to N2K Gateway with PC Interface, ISO ConnectionIntelligent Gateway technology enables PC interfacing and NMEA data conversion…The NGX-1 is an intelligent multi-function gateway, combining the power of our two previous generation products (NGT-1 and NGW-1) into one, cost effective, flexible product.Configure the NGX-1 to operate as an NMEA 2000 <–> PC interface, or as a bi-directional NMEA 0183 <–> NMEA 2000 conversion gateway.Features: View all NMEA 2000 network data on Actisense NMEA Reader. The device supports every available PGN in the NMEA 2000 standard. View converted NMEA 0183 data on Actisense NMEA Reader. The device sports the largest conversion library of any gateway. Easily interface with a wide range of PC applications via the NGX-1, such as TimeZero (NMEA 2000) and OpenCPN (NMEA 0183). Configure the Actisense EMU-1, NGW-1 and NGX-1 via Actisense Toolkit using an NGX-1. Connect legacy NMEA 0183 instruments together with new NMEA 2000 networks, greatly reducing upgrade costs. Vital NMEA 2000 diagnostic tool OPTO-isolated input and ISO-Drive™ output for safely interfacing with RS232 or RS422 Up to 230,400 baud data transfer rate Advanced configuration using Actisense Toolkit allows Tx / Rx lists and Tx rates to be set Supports Fast Heading at 10Hz Multiple diagnostic LEDs Allows all major PC Chartplotter applications to interface with the NMEA 2000 bus Provides a rule-enforcing firewall between the PC and the NMEA 2000 bus Powerful diagnosis of the NMEA 2000 network using the FREE NMEA Reader software provided Configure and flash-update Actisense products on the bus Upgrade NMEA 0183 equipment to NMEA 2000 Allow NMEA 0183 devices to receive vital NMEA 2000 data Use the NMEA 2000 bus to multiplex several NMEA 0183 signals together Reliable, renowned bi-directional conversion engine Supports a wide range of conversions including AIS Easily configurable using Actisense Toolkit Technical SpecificationsPower Supply Supply Voltage (NMEA 2000 Port) - 9 to 30V DC Supply Current (NMEA 2000 Port) - 62mA @ 9V DC Load Equivalent Number (LEN) - 2 NMEA 2000 Port Speed / Baud Rate - 250kbps Connectivity - M12 Male (A coded) ISO Port Compatibility - Full NMEA 0183, RS232 & RS422 compatibility. RS485 Listener compatible Speed/Baud Rate - 4800 to 230400 Baud Output Voltage Drive - >= 2.1V (differential) into 100Ω Output Current Drive - 20mA max. Output Protection - Short circuit and ESD Input Voltage Tolerance - -15V to +15V continuous -35V to +35V short term (< 1 second) Input Protection - Current limited and overdrive protection to 40VDC Connectivity - 5mm stripped and tinned wire Cable Length - 0.75m Isolation NMEA 2000 Port to ISO Port - Uses IsoDriveTM, Hi-Pot tested to 1000V NMEA 2000 Port to USB Port - Galvanic Isolation, Hi-Pot tested to 1000V Mechanical Housing Material Body - Flame retardant Polycarbonate Housing Material End Caps - Flame retardant PBT Weight - 113g Approvals and Certifications NMEA 2000 - NMEA 2000 Certified NMEA 0183 - Meets IEC 61162-1 & 61162-2 Requirements RoHS and REACH - Compliant Module Certification - KCC / BQB / IC / Wi-Fi / NCC / MIC / FCC DSS / FCC DTS / SRRC / CE, EN 60945:2002 Edition 4 (section 9.3), EN 301 489-1 V2.2.3, EN 301 489-17 V3.2.4 EMC - EN 300 328 V2.2.2 Radiated Spurious Emissions, FCC Part 15b, ICES-003 Iss 7 Environmental Protection    IP67 Operating Temperature    -25°C to +70°C Storage Temperature    -30°C to +70°C Recommended Humidity    0 to 93% RH @ 40°C Guarantee    3 years, extended to 5 years upon registration This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Data Interface: NMEA 0183 Box Dimensions: 1"H x 5"W x 6"L WT: 0.35 lbs UPC: 5060998710553 Quick Guide (pdf)Owner's Manual (pdf)Brochure (pdf)

Read more less

SM-3 Replacement BracketReplacement mounting bracket for ACR's SM-3 Marker Light.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Compound Step 1 - 12ozUtilizing the latest in abrasive technology, 303® Compound (Step 1) removes severe defects, including swirls and deeper scrapes and scratches. It is also the first step to flawless paint depth and clarity. Features: Strong and effective paint compound Removes up to 1500 grit scratches Use on both single-stage and base clear paint systems Can be used by hand, Rotary, or DA polisher Engineered to eliminate the most severe defects

Read more less

Marine Touchless Sealant - 128ozHave you had trouble finding time to fully wax your car?  303® Touchless Sealant will save you hours! This Si02 formula is a completely TOUCHLESS quicker alternative to waxing your vehicle. Simply spray on, and rinse off – it’s that easy!  It only takes minutes to get that same water beading protection you get from a full wax, saving you hours spent in the garage.   It’s also great for those looking to prolong the time in between waxes, or ceramic coatings. Safe for clear coat, gel coat, fiberglass, plastics, windshields, and wheels too!Usage Directions:Wash your car out of direct sunlight while the surface is cool. While the surface is still wet and out of direct sunlight, spray a small amount of product evenly across the surface, treating one section of the vehicle at a time. Only a light mist of the product is needed. Immediately rinse the section off. You will see water beading on the surface, meaning it is now protected. Repeat the steps on all sections of the vehicle, and then dry thoroughly with a waffle weave drying towel or microfiber towel.Features: Provides superior water beading Protects against paint fading Lasts up to 2x longer than traditional wax! Simply spray on, and rinse! Also great for use on windshields and wheels! 128 fluid oz. 303 Touchless Sealant is safe to use on a variety of surfaces, such as:Paint Clear coat Wheels Glass Plastics Fiberglass Gel-coat Aluminium Hard plexiglass And more! Specifications: Type: Waxes & Polishes Box Dimensions: 5"H x 7"W x 10"L WT: 8.7 lbs UPC: 082043303997 Quick Guide (pdf)

Read more less

RV Wash & Seal - 128oz303® RV Wash & Seal contains a highly concentrated formula so you can clean your RV the right way the first time. In addition to its cleansing properties, 303® RV Wash & Seal comes equipped with a built-in sealant that works hard to protect the surface of your RV. The adhesive is hydrophilic, meaning it sheets water from an RV’s exterior with ease. The result? The drying process becomes much easier because there will be no water spots, and your RV will be left with a glossy finish.Features: Leaves a clean, streak-free shine pH neutral – won’t strip wax or coatings High foam formula Provides a deep gloss finish, and added protection Concentrated formula – 1 oz to 5 gallons Directions:Add 1 oz. of 303® RV Wash & Seal to a 5-gallon bucket and fill it with clean water. Gently scrub the surface with a wash mitt or other cleaning accessory to remove dirt and grime. Rinse the entire RV thoroughly. Dry immediately with a clean drying towel for best results. Specifications: Type: Washes Box Dimensions: 4"H x 7"W x 11"L WT: 8.7 lbs UPC: 082043302402

Read more less

Rubber Roof Cleaner - 128ozKeep your RV’s rubber roof lasting longer using 303® Rubber Roof Cleaner. With frequent and proper cleaning of your RV’s rubber roof, you can prevent contaminants from becoming embedded in the surface which causes it to degrade over time. 303® Rubber Roof Cleaner is biodegradable, so it’s perfectly safe to rinse it off the roof and siding of an RV. You also do not need to worry about harming the solar panels on the top of your RV either. Simply clean any residue that might get on the panels with water. For the ultimate longevity of your rubber roof, use a coat of 303® Aerospace Protectant after treating with 303® Rubber Roof Cleaner.Features: Cleans and dissolves dirt on rubber roofs on RVs, Campers, Pop-Ups, and Motorhomes Biodegradable and non-abrasive Will not harm solar panels Won’t damage or dry out siding or rubber seals Great for use prior to 303® Aerospace Protectant Directions:Clean and remove any loose dirt and debris on the roof. Add 5 oz. of 303® Rubber Roof Cleaner to a 5-gallon bucket and fill it with clean water. Clean the roof using a scrubbing tool like a brush or mop, cleaning one 3-4 sq. ft. section at a time. Repeat on all sections of the roof, rinsing tools as necessary. After all, sections have been cleaned, rinse the entire roof with a hose and let dry. Never walk on a wet roof. You may also add to an empty spray bottle and spray on the roof instead of mixing it with water in a bucket.Rinse any residual runoff immediately to prevent streaking/water marks from occurring over the sides. 303® Rubber Roof Cleaner will not harm solar panels, however, we do not recommend cleaning solar panels with this product. Specifications: Type: Vinyl & Rubber Box Dimensions: 5"H x 7"W x 11"L WT: 8.75 lbs UPC: 082043302396

Read more less

Premium Replacement Distributor Cap f/Mercruiser Inboard Engines - GM-StyleThis distributor cap fits GM-Style (module in the cap) distributors - V8 Applications excluding MPI engines with ECM 555.Replaces: INDMAR Distributor Cap 556038 CRUSADER Distributor Cap 38070 MERCRUISER Distributor Cap 804418 MERCRUISER Distributor Cap 808483 MERCRUISER Distributor Cap 808483T MERCRUISER Distributor Cap 808483T3 SIERRA Distributor Cap 18-5354 CDI ELECTRONICS Distributor Cap E64-0014 *ARCO Assurance 12-month part and labor warranty protectionThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Rapid Charger Kit for SR203 Everything needed to charge the ACR Lithium Polymer battery (1062) for the SR203 VHF Handheld Radio.  Compatible With:ACR SR203 Handheld VHF RadioIn the Box: Rapid charger (2816) Wall adapter for AU, EU, UK, and USA (2817) 12V adaptor (2818) *Sold as an Individual WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Chargers Box Dimensions: 3"H x 6"W x 6"L WT: 0.85 lbs UPC: 791659028155

Read more less