Boat Outfitting - Accessories

Replacement Portlight Lens Only - 5" x 12" - SmokeReplacement lens only for Beckson Opening PortsFeatures: 5" x 12" Smoke

Read more less

Stainless 1" Hinged Jaw Slide with BoltThese Slide Fittings are used as part of a Bimini top system to install a new Bimini top, add additional support arms to an existing one, or customize a cock pit or sun deck awning. Jaw Slides attach an eye end securely to support tubing. The set screw on the back allows you to quickly and easily adjust the placement of these slides where they are needed. Hinged Jaw Slides are ideal for mounting on handrails, or in applications where it is not possible or convenient to slide the fitting onto the tubing. Jaw Slides fit tubing from 3/4” – 1-1/8”. Set screws can be purchased separately (299999-1). Requires 1/8" Allen wrench to install. Constructed of corrosion-resistant investment cast 316 stainless steel. Specifications: Tube OD: 1" Pin Size: 1/4" Weight: 0.38 WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

2.75" x 20 Yards - 80 Grit Ceramic Sandpaper - 1 RollSEM Performance Abrasives are specifically designed for today’s complex automotive repairs. The abrasive products incorporate “precision grain technology,” which provides fast cutting, long life, and a consistent finish on all substrates.Features: Ceramic grain Easy to tear to size C-weight paper Quick Guide (pdf)Brochure (pdf)

Read more less

2.75" x 40 Yards - 320 Grit Ceramic Sandpaper - 1 RollSEM Performance Abrasives are specifically designed for today’s complex automotive repairs. The abrasive products incorporate “precision grain technology,” which provides fast cutting, long life, and a consistent finish on all substrates.Features: Ceramic grain Easy to tear to size C-weight paper Quick Guide (pdf)Brochure (pdf)

Read more less

SkegShield® Skeg Guard for Merc O/BPrevent gearcase damage and protect your skeg with SkegShield® by Gator Guards. Installs in minutes to repair an already broken skeg with 27 American-made models engineered to fit your exact outboard or inboard. If your engine model is not listed, unfortunately, we do not have a model that will fit your specific needs.With your keel guarded and your bow shielded from damage, there is one part of the boat that is still exposed to excessive risk of damage, and that is your skeg. Gator Guards offers an extensive line of SkegShield skeg guards to protect your outboard or stern drive from damage.All SkegShields are made of 18-gauge, mirror finish polished 316 marine grade stainless steel. The SkegShield is further reinforced on the lower edge for protection that makes SkegShield twice as strong as any OEM skeg. SkegShield doesn’t stop there, we were the first to include a drain hole to prevent water retention & corrosion!27 Models available to fit your exact outboard or inboard engine. Mercury, Yamaha, Evinrude, Mercruiser, Mariner, Suzuki, Johnson, Honda, Force, Volvo Penta, and Tohatsu. Use the engine guide above to find your SkegShieldCompatible With:SS00513 - Evinrude (by Suzuki), 40-50 HP, 4 Stroke, 99-03; Mercury, 40-60 HP, 2 & 4 Stroke, 03-Current; and Mercury (ELPTO Model Only), 60 HP, 2 Stroke, 97-99Features: The toughest repair and protection for your lower unit Protects your skeg, preventing damage and costly repairs Easy DIY installation Reinforced lower edge for 2X the strength Shearable bolts prevent gearcase damage Drain hole to prevent water retention Made of durable 18-gauge 316 marine grade mirror polished Stainless Steel Prevent costly repairs Maintain the value of your boat 3-year warranty Installation Tips:All SkegShields are easy to install. There is no welding—no messy glue, adhesive or epoxy, and best of all no curing or down time. You’ll be back on the water in under 30 minutes and since we don’t have a foot or skid plate welded on the bottom we won’t affect your boat’s performance. If your motor is still under warranty – please check with your manufacturer about drilling holes in the skeg to mount a skeg guard.

Read more less

SkegShield® Skeg Guard for Merc/Bravo 1&3Prevent gearcase damage and protect your skeg with SkegShield® by Gator Guards. Installs in minutes to repair an already broken skeg with 27 American-made models engineered to fit your exact outboard or inboard. If your engine model is not listed, unfortunately, we do not have a model that will fit your specific needs.With your keel guarded and your bow shielded from damage, there is one part of the boat that is still exposed to excessive risk of damage, and that is your skeg. Gator Guards offers an extensive line of SkegShield skeg guards to protect your outboard or stern drive from damage.All SkegShields are made of 18-gauge, mirror finish polished 316 marine grade stainless steel. The SkegShield is further reinforced on the lower edge for protection that makes SkegShield twice as strong as any OEM skeg. SkegShield doesn’t stop there, we were the first to include a drain hole to prevent water retention & corrosion!27 Models available to fit your exact outboard or inboard engine. Mercury, Yamaha, Evinrude, Mercruiser, Mariner, Suzuki, Johnson, Honda, Force, Volvo Penta, and Tohatsu. Use the engine guide above to find your SkegShieldFeatures: The toughest repair and protection for your lower unit Easy DIY installation Reinforced lower edge for 2X the strength Shearable bolts prevent gearcase damage Drain hole to prevent water retention Made of durable 18-gauge 316 marine grade mirror polished Stainless Steel Prevent costly repairs Maintain the value of your boat 3-year warranty Installation Tips:All SkegShields are easy to install. There is no welding—no messy glue, adhesive or epoxy, and best of all no curing or down time. You’ll be back on the water in under 30 minutes and since we don’t have a foot or skid plate welded on the bottom we won’t affect your boat’s performance. If your motor is still under warranty – please check with your manufacturer about drilling holes in the skeg to mount a skeg guard.

Read more less

SkegShield® Skeg Guard for Merc/VeradoPrevent gearcase damage and protect your skeg with SkegShield® by Gator Guards. Installs in minutes to repair an already broken skeg with 27 American-made models engineered to fit your exact outboard or inboard. If your engine model is not listed, unfortunately, we do not have a model that will fit your specific needs.With your keel guarded and your bow shielded from damage, there is one part of the boat that is still exposed to excessive risk of damage, and that is your skeg. Gator Guards offers an extensive line of SkegShield skeg guards to protect your outboard or stern drive from damage.All SkegShields are made of 18-gauge, mirror finish polished 316 marine grade stainless steel. The SkegShield is further reinforced on the lower edge for protection that makes SkegShield twice as strong as any OEM skeg. SkegShield doesn’t stop there, we were the first to include a drain hole to prevent water retention & corrosion!27 Models available to fit your exact outboard or inboard engine. Mercury, Yamaha, Evinrude, Mercruiser, Mariner, Suzuki, Johnson, Honda, Force, Volvo Penta, and Tohatsu. Use the engine guide above to find your SkegShieldFeatures: The toughest repair and protection for your lower unit Easy DIY installation Reinforced lower edge for 2X the strength Shearable bolts prevent gearcase damage Drain hole to prevent water retention Made of durable 18-gauge 316 marine grade mirror polished Stainless Steel Prevent costly repairs Maintain the value of your boat 3-year warranty Installation Tips:All SkegShields are easy to install. There is no welding—no messy glue, adhesive or epoxy, and best of all no curing or down time. You’ll be back on the water in under 30 minutes and since we don’t have a foot or skid plate welded on the bottom we won’t affect your boat’s performance. If your motor is still under warranty – please check with your manufacturer about drilling holes in the skeg to mount a skeg guard.

Read more less

SkegShield® Skeg Guard for YamahaPrevent gearcase damage and protect your skeg with SkegShield® by Gator Guards. Installs in minutes to repair an already broken skeg with 27 American-made models engineered to fit your exact outboard or inboard. If your engine model is not listed, unfortunately, we do not have a model that will fit your specific needs.With your keel guarded and your bow shielded from damage, there is one part of the boat that is still exposed to excessive risk of damage, and that is your skeg. Gator Guards offers an extensive line of SkegShield skeg guards to protect your outboard or stern drive from damage.All SkegShields are made of 18-gauge, mirror finish polished 316 marine grade stainless steel. The SkegShield is further reinforced on the lower edge for protection that makes SkegShield twice as strong as any OEM skeg. SkegShield doesn’t stop there, we were the first to include a drain hole to prevent water retention & corrosion!27 Models available to fit your exact outboard or inboard engine. Mercury, Yamaha, Evinrude, Mercruiser, Mariner, Suzuki, Johnson, Honda, Force, Volvo Penta, and Tohatsu. Use the engine guide above to find your SkegShieldFeatures: The toughest repair and protection for your lower unit Easy DIY installation Reinforced lower edge for 2X the strength Shearable bolts prevent gearcase damage Drain hole to prevent water retention Made of durable 18-gauge 316 marine grade mirror polished Stainless Steel Prevent costly repairs Maintain the value of your boat 3-year warranty Installation Tips:All SkegShields are easy to install. There is no welding—no messy glue, adhesive or epoxy, and best of all no curing or down time. You’ll be back on the water in under 30 minutes and since we don’t have a foot or skid plate welded on the bottom we won’t affect your boat’s performance. If your motor is still under warranty – please check with your manufacturer about drilling holes in the skeg to mount a skeg guard.

Read more less

SkegShield® Skeg Guard for Merc/A1 G2Prevent gearcase damage and protect your skeg with SkegShield® by Gator Guards. Installs in minutes to repair an already broken skeg with 27 American-made models engineered to fit your exact outboard or inboard. If your engine model is not listed, unfortunately, we do not have a model that will fit your specific needs.With your keel guarded and your bow shielded from damage, there is one part of the boat that is still exposed to excessive risk of damage, and that is your skeg. Gator Guards offers an extensive line of SkegShield skeg guards to protect your outboard or stern drive from damage.All SkegShields are made of 18-gauge, mirror finish polished 316 marine grade stainless steel. The SkegShield is further reinforced on the lower edge for protection that makes SkegShield twice as strong as any OEM skeg. SkegShield doesn’t stop there, we were the first to include a drain hole to prevent water retention & corrosion!27 Models available to fit your exact outboard or inboard engine. Mercury, Yamaha, Evinrude, Mercruiser, Mariner, Suzuki, Johnson, Honda, Force, Volvo Penta, and Tohatsu. Use the engine guide above to find your SkegShieldFeatures: The toughest repair and protection for your lower unit Easy DIY installation Reinforced lower edge for 2X the strength Shearable bolts prevent gearcase damage Drain hole to prevent water retention Made of durable 18-gauge 316 marine grade mirror polished Stainless Steel Prevent costly repairs Maintain the value of your boat 3-year warranty Installation Tips:All SkegShields are easy to install. There is no welding—no messy glue, adhesive or epoxy, and best of all no curing or down time. You’ll be back on the water in under 30 minutes and since we don’t have a foot or skid plate welded on the bottom we won’t affect your boat’s performance. If your motor is still under warranty – please check with your manufacturer about drilling holes in the skeg to mount a skeg guard.

Read more less

Bowshield - Medium 7.5" x 9"Protect the bow of your boat from scuffs and abrasions caused by the trailer roller with the most durable bow guard on the market.The bow, much like the keel, is in a very vulnerable area in the front of the boat. The exposed bow can easily be scratched, torn, and worse from bumping into docks, trailer hitches, and bow rollers. This can cause some expensive damage to your boat. Don’t let that happen! Ensure that your bow area is protected with Gator Guards BowShield.Constructed of strong and durable 22 gauge, 316 marine grade mirror finish stainless steel, the small BowShield is 6.5" x 6" and fits bow rollers up to 5'' and the medium fits bow rollers up to 8''  The area where the BowShield gets installed needs to be smooth with no steps or chines to conform around.The BowShield has a pre-creased centerline for easy bending and fitting. It is easy to apply and comes complete with a 24-hour urethane adhesive for a permanent installation. It will not pop off like the peel-and-stick ones. Every BowShield comes with our three-year warranty.Features: Easy, DIY installation Eliminates costly repairs Increases the value of your boat Made of durable 316 marine-grade mirror-finished stainless steel Available in 2 sizes

Read more less

SkegShield® Skeg Guard for Mercury MarinerPrevent gearcase damage and protect your skeg with SkegShield® by Gator Guards. Installs in minutes to repair an already broken skeg with 27 American-made models engineered to fit your exact outboard or inboard. If your engine model is not listed, unfortunately, we do not have a model that will fit your specific needs.With your keel guarded and your bow shielded from damage, there is one part of the boat that is still exposed to excessive risk of damage, and that is your skeg. Gator Guards offers an extensive line of SkegShield skeg guards to protect your outboard or stern drive from damage.All SkegShields are made of 18-gauge, mirror finish polished 316 marine grade stainless steel. The SkegShield is further reinforced on the lower edge for protection that makes SkegShield twice as strong as any OEM skeg. SkegShield doesn’t stop there, we were the first to include a drain hole to prevent water retention & corrosion!27 Models available to fit your exact outboard or inboard engine. Mercury, Yamaha, Evinrude, Mercruiser, Mariner, Suzuki, Johnson, Honda, Force, Volvo Penta, and Tohatsu. Use the engine guide above to find your SkegShieldMercury/Mariner: 75 - 115 HP 4-stroke: 2015 - Current (Command Thrust & SeaPro) 135 - 200 HP 4-stroke: 2005 - 2018 (4.8" Case) 200 - 300 HP 2-stroke: 1996 - 2018 (Fits Optimax)  Features: The toughest repair and protection for your lower unit Easy DIY installation Reinforced lower edge for 2X the strength Shearable bolts prevent gearcase damage Drain hole to prevent water retention Made of durable 18-gauge 316 marine grade mirror polished Stainless Steel Prevent costly repairs Maintain the value of your boat 3-year warranty Installation Tips:All SkegShields are easy to install. There is no welding—no messy glue, adhesive or epoxy, and best of all no curing or down time. You’ll be back on the water in under 30 minutes and since we don’t have a foot or skid plate welded on the bottom we won’t affect your boat’s performance. If your motor is still under warranty – please check with your manufacturer about drilling holes in the skeg to mount a skeg guard.

Read more less

Top-Mounted Flag Pole Socket Polished Brass - 3/4" IDFeatures: Polished Brass Top Mounted Flag Pole Socket Tube I.D. - 3/4" Base - 2" Height - 1-3/4" Fastener - #6(3) Specifications: Type: Flags & Flag Poles Box Dimensions: 2"H x 4"W x 6"L WT: 0.25 lbs UPC: 725060500139

Read more less