Boat Outfitting - Accessories

316 SS T-Bolt Clamp - 3/4" Band - 2.78"-3.09" Range - 10-PackVery strong and secure clamp for critical installations. Trident Marine T-Bolt Clamps are built with safety in mind. With a 3/4" (19 mm) wide band, this clamp ensures a greater area of coverage for a positive and strong union. Recommendations: For our Silicone and PVC products Can be used on any hose connection with peace of mind that they will last you a very long time It is recommended that two clamps be used on each end of a wet exhaust installation. Construction: Band & Housing: 316 stainless steel 3/4” wide band T-Bolt and Nut: 18-8 stainless steel with nylon insert  Specifications: Hose Inner Diameter (inch): 2-3/8" - 2-1/2" Hose Outer Diameter (inch): 2.78" - 3.09" Quick Guide (pdf)

Read more less

316 SS T-Bolt Clamp - 3/4" Band - 8.62"-9.19" Range - 10-PackVery strong and secure clamp for critical installations. Trident Marine T-Bolt Clamps are built with safety in mind. With a 3/4" (19 mm) wide band, this clamp ensures a greater area of coverage for a positive and strong union. Recommendations: long T-Bolt is being used and is recommended for rubber hose products Can be used on any hose connection with peace of mind that they will last you a very long time It is recommended that two clamps be used on each end of a wet exhaust installation. Construction: Band & Housing: 316 stainless steel 3/4” wide band Long T-Bolt & Nut: 18-8 stainless steel with nylon insert  Specifications:Hose Outer Diameter (inch): 8.62" - 9.19"

Read more less

316 SS Non-Perforated Worm Gear Hose Clamp - 3/8" Band - (5/16" – 9/16") Clamping Range - 10-Pack - SAE Size 3Premium Marine Grade, all AISI 316 (high tensile strength) Stainless Steel Compact “HD NON-PERF” Worm Gear Hose Clamp. The 9.7 mm (0.382”) wide band is Non-Perforated and smooth on the inside with rolled edges. This eliminates hose damage with increased clamping force. The high strength, compact, one-piece 14mm (0.55”) wide housing provides one of the highest clamping force ratings of any worm gear style clamp.Features: The screw head is 7mm Long service life and safety for most general-purpose hose applications and connections Recommendations: Measure hose O.D. before selecting clamp size for proper fit Double clamp on each hose end for critical applications Construction: Band & Housing: 316 Stainless Steel 9.7 mm wide band – 0.8mm thick Screw Drive: 316 Stainless Steel 7.0 mm screw head Specifications: SAE Size: 3 Hose Inner Diameter: (inch) 3/16" – 1/4" Clamping Range: (inch) 5/16" – 9/16"  / (mm) 8-14 Recommended Torque Inch lbs: 25-35 Quick Guide (pdf)

Read more less

Vinyl Coat™ - Light Grey - 12ozMarine Vinyl Coat is a line of flexible aerosol coatings to match, restore or change the color of most marine vinyl and plastic surfaces. Features: Covers stains, fading and prepped mildew Superior adhesion Outstanding UV protection  Stays flexible, will not crack Excellent hiding  Quick drying Applications: Vinyl Plastic marine surfaces Quick Guide (pdf)Brochure (pdf)

Read more less

Poly Rail Mount Motor Bracket - WhiteInjection Molded PolypropyleneThese Rail Mount Motor Brackets are designed to hold small, 2-cycle outboards up to 8 HP upright on the stern rail. Will fit both 7/8" and 1" rails, as well as rails using 90° tee fittings. Most other polypropylene and wood motor brackets only fit 1" welded rails. The two-piece unit features extra holes, enabling the use of a recommended chain to secure the motor. Can also be used as a mounting platform for barbecues, down rigger brackets, fish cleaning tables, etc. Constructed of UV stabilized polypropylene. Includes all necessary fasteners.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Poly Rail Mount Motor Bracket - BlackInjection Molded PolypropyleneThese Rail Mount Motor Brackets are designed to hold small, 2-cycle outboards up to 8 HP upright on the stern rail. Will fit both 7/8" and 1" rails, as well as rails using 90° tee fittings. Most other polypropylene and wood motor brackets only fit 1" welded rails. The two-piece unit features extra holes, enabling the use of a recommended chain to secure the motor. Can also be used as a mounting platform for barbecues, down rigger brackets, fish cleaning tables, etc. Constructed of UV stabilized polypropylene. Includes all necessary fasteners.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

GS-2-50 Grounding Strap - 2" x 50'This grounding strap is an ideal conductor for RF grounding of SSB radios and other noise-sensitive transceivers, for bonding thru-hulls, etc.Features: Flexible (easily conforms to vessel contours) .01 in. (25mm) thick Specifications: Width (in./cm): 2/5.1 Length (ft./m): 50/17 Weight (lbs/kg): 5/2.3

Read more less

Quick Flush™ Outboard Flush Fitting Kit for Mercury & Yamaha OutboardsProvides a quick and easy way to flush any outboard equipped with a flushing port. No more removing the plug and twisting the hoses to flush. Replace the plug with the Quick Flush™ and snap the hose on and off. Normal operating water pressure keeps the valve sealed when using the engine. Features: Makes flushing outboard quick and easy Unique previously patented slide valve replaces the outboard flushing port plug The O-ring seal closes off the port when operating the engine Quick connect on hose snaps onto valve for flushing No plug to remove and no difficulty turning of hose into the  port Takes the hassle out of flushing your outboard Fits all outboards equipped with a flushing port Kit consists of slide valve, hose quick connector, and washer WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Service Kits Box Dimensions: 1"H x 4"W x 7"L WT: 0.1 lbs UPC: 733572010626

Read more less

Non-Tipping Dog Bowl - GraphiteThe Toadfish Non-Tipping Dog Bowl sticks to any smooth surface to prevent the inevitable dog bowl flip! When users want to pick it up for a refill, simply lift it straight up to release the suction. These dog bowls feature a sturdy stainless-steel construction that is extremely hygienic and safer for pets than traditional plastic bowls. Toadfish also includes a lid so users can easily pack their food or water for the next adventure.Features: Smartgrip Technology - Patented SmartGrip technology makes it hard to tip but easy to lift Double-Wall Vacuum Insulation - Keeps your pup's water fresh and cold Stainless Steel - Made with high-grade stainless steel, making them puncture & rust-resistant Specifications: Dimensions & Specs:  8" Width x 3" Tall x 2" Inside Depth | 6 Cups Color: Graphite *Hand wash only*Lid included with bowl

Read more less

Yamaha High Thrust Large Power Head 9.9, 15 (2005)TROLLMaster offers a variety of different servo mounting hardware kits to allow easy installation on the most popular kicker motors. The motor-specific hardware kit must be purchased as a separate item. As long as you know the make, HP and year of your kicker motor, you can determine which hardware kit you need.

Read more less

Mercury Mariner 9.9, 15 (1990-2004) & Yamaha 9.9, 15 (1990-2006)TROLLMaster offers a variety of different servo mounting hardware kits to allow easy installation on the most popular kicker motors. The motor-specific hardware kit must be purchased as a separate item. As long as you know the make, HP and year of your kicker motor, you can determine which hardware kit you need.

Read more less

Inflatable PupPlank Dog Ramp - XLThe inflatable Pup Plank dog ramps are perfect for any dog. These can be used on boats, docks, pools & more. Great for the pool to help animals or critters exit the water safely. Deep weighted mesh with integrated steps creates an easy entrance for your dog. Equipped with multiple D-ring tie-downs, claw-resistant traction pad & (2) 8ft lines for tying. The Pup Plank was invented to make it easier for water-loving dogs to get in and out of the water. Whether it be on the boat, off the dock, or in the pool – attach the Pup Plank and let your dog effortlessly enjoy the water. Gone are the days of you, the owner, having to struggle to lift your dog out of the water. The Pup Planks integrated weighted mesh sinks below water level to create an effortless entry point for swimming pets. The frame is designed with premium-grade PVC & our state-of-the-art drop-stitch technology, so the Pup Plank feels rigid when inflated, and is incredibly light & compact when folded up - making it the perfect item for your boat.Features: Halkey-Roberts (HR) valve for rapid inflating and deflating with push-pin function and screw cap Heavy-duty woven reinforced loop construction offers great strength and durability  Weighted mesh dips below the water level to create an easy entry point 4 D-ring attachment points (2 on the top side and 2 underneath) Designed with ultra-dense, claw-resistant pad material that is UV + saltwater resistant Integrated steps add increased traction underwater for dogs to easily climb Technical Specifications: Ramp dimensions - 48" x 32" x 5" Weight - 12 lbs Folded size - 21" x 10" Weight capacity - 120 lbs In the Box: PupPlank Hand pump Sling-style carry bag (2) 8' rope lines Repair kit

Read more less