Boat Outfitting - Adhesive/Sealants

Elastometric 3 oz (89ml) Sealant Tube - ClearA one-part, fast skinning (10 minutes) and fast curing (24 hours) multi-purpose marine grade sealant with superior strength, adhesion, elongation and life characteristics. Cures in temperatures of -20°F (-28.9°C) to 120°F (-48.9°C) and can be wet sanded and painted after curing. Flexibility and compression capabilities are excellent. Heavy duty use above or below the waterline. Twists, bends, expands, compresses. Seals ports, beds hardware, stops leaks. Resistant to teak cleaners, oil, diesel fuel and salt water. Adheres tenaciously without primers to fiberglass, glass, plastic, metal and wood. Simple clean up with mineral spirits. Not recommended for wooden deck seams or use in areas subject to gasoline.Features: Twists, bends, expands, compresses Seals ports, bed hardware and stops leaks Perfect for trim tabs and transducers WARNING: This product can expose you to chemicals including Toluene which is known to the State of California to cause birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Sikaflex® 221 Multi-Purpose Polyurethane Sealant/Adhesive - 10.3oz(300ml) Cartridge - Aluminum GraySikaflex®-221 is a high-quality multi-purpose non-sag 1-c polyurethane sealant/adhesive that cures on exposure to atmospheric humidity to form a durable elastomer. Meets approvals ASTM C920 types Sikaflex®-221 is tested and classified in accordance with ANSI/UL 723 “Test for Surface Burning Characteristics of Building Materials”.Uses:Sikaflex®-221 bonds well to a wide variety of substrates and is suitable for making permanent elastic seals of high adhesive strength. Suitable substrate materials are wood, metals, metal primers and paint coatings (2-c systems), ceramic materials and plastics.Characteristics & Advantages: Highly elastic and durable Resistant to aging and weathering exposure Non-corrosive Can be sanded and overpainted NSF registered, Proprietary Substances and Nonfood Compounds (black, gray, and white) UL listed for potable water (black, gray, and white) WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)

Read more less

Aktivator-205 Clear 250ml BottleSika® Aktivator-205 is a solvent-based colorless clear adhesion promoter, which reacts with moisture and deposits active groups on the substrate. These groups act as a link between substrates and primers or sealants/adhesives. Sika® Aktivator-205 is designed for the treatment of bond faces prior to the application of Sikaflex® and Sikasil® adhesives and sealants.   Features: Enhanced adhesion on various substrates Short flash-off time Easy to use Transparent Areas of Application:Sika® Aktivator-205 is used to improve adhesion on non-porous substrates such as metals, plastics, ceramic screen prints, and painted surfaces. Seek manufacturer’s advice and perform tests on original substrates before using Sika® Aktivator-205 on materials prone to stress cracking. This product is suitable for experienced professional users only. Tests with actual substrates and conditions have to be performed to ensure adhesion and material compatibility.

Read more less

Git Rot Kit - QuartUnique two-part liquid epoxy saturates and restores original strength to wood by penetrating the rot. Actually works with the loose rotted fibers. Wood must be dry. Apply by injecting into wood. Will soak into wood by capillary action. One-half hour pot life after mixing. Cures overnight. Sandable and paintable, can be drilled and screwed. Compatible with fiberglass resins, epoxies and most sealants. Great for transoms, stringers and cabin roof rot in both fiberglass and wood boats.*Note: This product is available for Ground Shipping OnlyWARNING: This product can expose you to chemicals including Di-n-butyl Phthalate which is known to the State of California to cause reproductive harm. For more information go to P65Warnings.ca.gov. Owner's Manual (pdf)

Read more less

Elastomeric Marine Sealant - 10oz Cartridge - ClearA one-part, fast skinning (10 minutes) and fast curing (24 hours) multi-purpose marine grade sealant with superior strength, adhesion, elongation and life characteristics. Cures in temperatures of -20°F (-28.9°C) to 120°F (48.9°C) and can be wet sanded and painted after curing. Flexibility and compression capabilities are excellent. Heavy duty use above or below the waterline. Twists, bends, expands, compresses. Seals ports, beds hardware, stops leaks. Resistant to teak cleaners, oil, diesel fuel and salt water. Adheres tenaciously without primers to fiberglass, glass, plastic, metal and wood. Simple clean up with mineral spirits. Not recommended for wooden deck seams or use in areas subject to gasoline.WARNING: This product can expose you to chemicals including Toluene which is known to the State of California to cause birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

SikaBiresin® AP077 White Quart ** BPO Hardener Required **SikaBiresin® AP077 is a polyester filler and fairing compound that offers the user a smooth workable paste with a set fast cure to expedite those applications for repair or finish. It is easier to sand than conventional fillers and can be finished to a feather edge. This material can be easily applied with a squeegee, spatula, or flat tool, and once cured will accept virtually all types of coatings and decorative films.Features: Exceptional adhesion Very quick setting Minimal shrinkage Usage:SikaBiresin® AP077 can be used in the following applications: gel coat blister repair, fiberglass parts repair, and filling cloth imprint on FRP panels. This material has excellent adhesive and bond strength to fiberglass, SMC, FRP, epoxy, graphite, and Kevlar® composites as well as aluminum, wood, and other substrates.Advantages: Exceptional adhesion Very quick setting Minimal shrinkage High service temperature Excellent finishing and machinability Accept virtually all types of finishes Low moisture absorption for above or below-waterline applications Quick Guide (pdf)Owner's Manual (pdf)

Read more less

SikaBiresin® AP077 White Gallon BPO Hardener RequiredSikaBiresin® AP077 is a polyester filler and fairing compound that offers the user a smooth workable paste with a set fast cure to expedite those applications for repair or finish. It is easier to sand than conventional fillers and can be finished to a feather edge. This material can be easily applied with a squeegee, spatula, or flat tool, and once cured will accept virtually all types of coatings and decorative films.Features: Exceptional adhesion Very quick setting Minimal shrinkage Usage:SikaBiresin® AP077 can be used in the following applications: gel coat blister repair, fiberglass parts repair, and filling cloth imprint on FRP panels. This material has excellent adhesive and bond strength to fiberglass, SMC, FRP, epoxy, graphite, and Kevlar® composites as well as aluminum, wood, and other substrates.Advantages: Exceptional adhesion Very quick setting Minimal shrinkage High service temperature Excellent finishing and machinability Accept virtually all types of finishes Low moisture absorption for above or below waterline applications

Read more less

Life-Calk Solvent & Cleaner - 16ozCleans surfaces prior to caulking with Life-Calk, Life Seal, silicone or Teak Deck Sealant. Safe for fiberglass. Removes uncured polysulfide sealant and grease from tools and equipment. Acetone free formula. Owner's Manual (pdf)

Read more less

Elastometric 3 oz (89ml) Sealant Tube - BlackA one-part, fast skinning (10 minutes) and fast curing (24 hours) multi-purpose marine grade sealant with superior strength, adhesion, elongation and life characteristics. Cures in temperatures of -20°F (-28.9°C) to 120°F (-48.9°C) and can be wet sanded and painted after curing. Flexibility and compression capabilities are excellent. Heavy duty use above or below the waterline. Twists, bends, expands, compresses. Seals ports, beds hardware, stops leaks. Resistant to teak cleaners, oil, diesel fuel and salt water. Adheres tenaciously without primers to fiberglass, glass, plastic, metal and wood. Simple clean up with mineral spirits. Not recommended for wooden deck seams or use in areas subject to gasoline.Features: Twists, bends, expands, compresses Seals ports, bed hardware and stops leaks Perfect for trim tabs and transducers WARNING: This product can expose you to chemicals including Toluene which is known to the State of California to cause birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Elastometric 3 oz (89ml) Sealant Tube - WhiteA one-part, fast skinning (10 minutes) and fast curing (24 hours) multi-purpose marine grade sealant with superior strength, adhesion, elongation and life characteristics. Cures in temperatures of -20°F (-28.9°C) to 120°F (-48.9°C) and can be wet sanded and painted after curing. Flexibility and compression capabilities are excellent. Heavy duty use above or below the waterline. Twists, bends, expands, compresses. Seals ports, beds hardware, stops leaks. Resistant to teak cleaners, oil, diesel fuel and salt water. Adheres tenaciously without primers to fiberglass, glass, plastic, metal and wood. Simple clean up with mineral spirits. Not recommended for wooden deck seams or use in areas subject to gasoline.Features: Twists, bends, expands, compresses Seals ports, bed hardware and stops leaks Perfect for trim tabs and transducers WARNING: This product can expose you to chemicals including Toluene which is known to the State of California to cause birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

LifeSeal® Sealant Tube 2.8 FL. Oz - ClearA unique combination of marine silicone and polyurethane, formulated especially for fiberglass. LifeSeal® offers a fast-curing, low odor, high adhesion, non-sagging, non-corrosive, non-yellowing formula. It provides a durable permanent watertight seal for joints subject to structural movement. May be used above and below the waterline. Use for sealing decks to hulls, thru-hull fittings, vinyl ports, sealing/glazing windshields and bedding marine hardware. Will adhere to metal, glass, wood, Lexan®, ABS® and certain other materials. Can be removed without damaging gel-coat. Not recommended for ferro cement hulls, impregnated wood or oil-soaked materials. Cures in presence of water. Mildew resistant and acid free.

Read more less

Sikaflex® 221 Multi-Purpose Polyurethane Sealant/Adhesive - 10.3oz(300ml) Cartridge - BlackSikaflex®-221 is a high-quality multi-purpose non-sag 1-c polyurethane sealant/adhesive that cures on exposure to atmospheric humidity to form a durable elastomer. Meets approvals ASTM C920 types Sikaflex®-221 is tested and classified in accordance with ANSI/UL 723 “Test for Surface Burning Characteristics of Building Materials”.Uses:Sikaflex®-221 bonds well to a wide variety of substrates and is suitable for making permanent elastic seals of high adhesive strength. Suitable substrate materials are wood, metals, metal primers and paint coatings (2-c systems), ceramic materials and plastics.Characteristics & Advantages: Highly elastic and durable Resistant to aging and weathering exposure Non-corrosive Can be sanded and overpainted NSF registered, Proprietary Substances and Nonfood Compounds (black, gray, and white) UL listed for potable water (black, gray, and white) WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)

Read more less