Boat Outfitting - Antifouling Systems

PRO-8 8-Transducer Ultrasonic Antifouling System - 24VDCThe BPS-8 is an eight-transducer system that can add antifouling protection to hulls, drives, rudders, stabilizers, and more. This single system can provide ultrasonic antifouling protection for hulls up to 80ft in length or can be combined with additional systems for larger vessels. The BPS-8 is also the perfect solution for vessels under 52' with inboards or sail drives to have one system covering the entire vessel.The PRO-8 Package Includes: 1x BPS-8 Control Module with Integrated Power Cable 8x Submersible Ultrasonic Transducers with 15ft of Cable 4x Additional 15ft Extension Cables 2x Epoxy Kits 1x Printed Installation and Operation Manual Specifications: Voltage: 12V & 24V DC Average Power Draw: 2Ah Transducer Strength: 60W Cable Length: 15ft per transducer Frequency: Multi-frequency ultrasonic sweep algorithm (20kHz-42kHz) Installation Overview: No Thru-Hulls: The transducers are installed directly on top of your hull surface using the provided epoxy. Install Signal Cable: Each transducer has 15ft of connected signal cable. This ensures an easy installation from the transducer to the controller. Mounting the Controller: The BPS-1 Controller runs off of your boat's existing house battery. It is a simple 2-wire connection the the battery bank or distribution panel. Enjoy Worry-Free Boating: That's it! Your BPS system is done! Let our advanced antifouling protection do its job. Each system is programmed with a multi-frequency sweeping algorithm to ensure that your boat has the best antifouling protection on the market. How the Technology Works: The Mechanism: The system emits high-frequency ultrasonic waves through the hull & drives, creating a microscopic barrier of resonance. Targeting the Root Cause: These ultrasound waves repel biofouling from attaching to your hull before they ever have the chance to attach. Eco-Friendly: 100% chemical-free. It does not leach pollutants into the water, making it safe for marinas with strict environmental regulations. Marine Life Safe: The frequencies used are outside the hearing range of marine mammals and humans. Benefits: Fuel Efficiency: A clean hull creates less drag. Maintaining hull smoothness ensures you get the best possible MPG and top speed. Reduced Maintenance Costs: Significantly extends the life of your bottom paint and reduces the frequency of expensive haul-outs. Diver Savings: Reduces the need for monthly hull cleaning services. Hard-to-Reach Protection: Unlike paint, ultrasonic waves resonate through complex parts that are difficult to paint and clean, such as stern drives, sea strainers, and rudders. Fit & Forget: Once installed, the system runs automatically with zero scheduled maintenance required. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

PRO-6 6-Transducer Ultrasonic Antifouling System - 24VDCThe PRO-6 is a six-transducer system that can add antifouling protection to hulls, drives, rudders, stabilizers, and more. This single system can provide ultrasonic antifouling protection for hulls up to 75ft in length or can be combined with additional systems for larger vessels. The PRO-6 is also the perfect solution for vessels under 60' with pods or stern drives to have one system covering the entire vessel.The PRO-6 Package Includes: 1x PRO-6 Control Module with Integrated Power Cable 6x Submersible Ultrasonic Transducers with 15ft of Cable 3x Additional 15ft Extension Cables 2x Epoxy Kits 1x Printed Installation and Operation Manual Specifications: Voltage: 24V DC Average Power Draw: 1.5Ah Transducer Strength: 120W Cable Length: 15ft per transducer Frequency: Multi-frequency ultrasonic sweep algorithm (20kHz-42kHz) Installation Overview: No Thru-Hulls: The transducers are installed directly on top of your hull surface using the provided epoxy. Install Signal Cable: Each transducer has 15ft of connected signal cable. This ensures an easy installation from the transducer to the controller. Mounting the Controller: The BPS-1 Controller runs off of your boat's existing house battery. It is a simple 2-wire connection the the battery bank or distribution panel. Enjoy Worry-Free Boating: That's it! Your BPS system is done! Let our advanced antifouling protection do its job. Each system is programmed with a multi-frequency sweeping algorithm to ensure that your boat has the best antifouling protection on the market. How the Technology Works: The Mechanism: The system emits high-frequency ultrasonic waves through the hull & drives, creating a microscopic barrier of resonance. Targeting the Root Cause: These ultrasound waves repel biofouling from attaching to your hull before they ever have the chance to attach. Eco-Friendly: 100% chemical-free. It does not leach pollutants into the water, making it safe for marinas with strict environmental regulations. Marine Life Safe: The frequencies used are outside the hearing range of marine mammals and humans. Benefits: Fuel Efficiency: A clean hull creates less drag. Maintaining hull smoothness ensures you get the best possible MPG and top speed. Reduced Maintenance Costs: Significantly extends the life of your bottom paint and reduces the frequency of expensive haul-outs. Diver Savings: Reduces the need for monthly hull cleaning services. Hard-to-Reach Protection: Unlike paint, ultrasonic waves resonate through complex parts that are difficult to paint and clean, such as stern drives, sea strainers, and rudders. Fit & Forget: Once installed, the system runs automatically with zero scheduled maintenance required. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

BPS-1 1-Transducer Ultrasonic Antifouling System - 12VDCThe BPS-1 is a single transducer system that can add antifouling protection to hulls, drives, rudders, stabilizers, and more. This single system can provide ultrasonic antifouling protection for hulls up to 20ft in length or can be combined with additional systems for larger vessels. The BPS-1 can also be tasked with protecting drives and rudders.The BPS-1 Package Includes: 1x BPS-1 Control Module with Integrated Power Cable 1x Submersible Ultrasonic Transducers with 15ft of Cable 1x Epoxy Kit 1x Printed Installation and Operation Manual Specifications: Voltage: 12V or 24V DC Average Power Draw: 0.25Ah Transducer Strength: 60W Cable Length: 15ft per transducer Frequency: Multi-frequency ultrasonic sweep algorithm (20kHz-42kHz) Installation Overview: No Thru-Hulls: The transducers are installed directly on top of your hull surface using the provided epoxy. Install Signal Cable: Each transducer has 15ft of connected signal cable. This ensures an easy installation from the transducer to the controller. Mounting the Controller: The BPS-1 Controller runs off of your boat's existing house battery. It is a simple 2-wire connection the the battery bank or distribution panel. Enjoy Worry-Free Boating: That's it! Your BPS system is done! Let our advanced antifouling protection do its job. Each system is programmed with a multi-frequency sweeping algorithm to ensure that your boat has the best antifouling protection on the market. How the Technology Works: The Mechanism: The system emits high-frequency ultrasonic waves through the hull & drives, creating a microscopic barrier of resonance. Targeting the Root Cause: These ultrasound waves repel biofouling from attaching to your hull before they ever have the chance to attach. Eco-Friendly: 100% chemical-free. It does not leach pollutants into the water, making it safe for marinas with strict environmental regulations. Marine Life Safe: The frequencies used are outside the hearing range of marine mammals and humans. Benefits: Fuel Efficiency: A clean hull creates less drag. Maintaining hull smoothness ensures you get the best possible MPG and top speed. Reduced Maintenance Costs: Significantly extends the life of your bottom paint and reduces the frequency of expensive haul-outs. Diver Savings: Reduces the need for monthly hull cleaning services. Hard-to-Reach Protection: Unlike paint, ultrasonic waves resonate through complex parts that are difficult to paint and clean, such as stern drives, sea strainers, and rudders. Fit & Forget: Once installed, the system runs automatically with zero scheduled maintenance required. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

BPS-6 6-Transducer Ultrasonic Antifouling System - 12VDCThe BPS-6 is a six-transducer system that can add antifouling protection to hulls, drives, rudders, stabilizers, and more. This single system can provide ultrasonic antifouling protection for hulls up to 65ft in length or can be combined with additional systems for larger vessels. The BPS-6 is also the perfect solution for vessels under 52' with pods or stern drives to have one system covering the entire vessel.The BPS-6 Package Includes: 1x BPS-6 Control Module with Integrated Power Cable 6x Submersible Ultrasonic Transducers with 15ft of Cable 3x Additional 15ft Extension Cables 2x Epoxy Kits 1x Printed Installation and Operation Manual Specifications: Voltage: 12V or 24V DC Average Power Draw: 1.5Ah Transducer Strength: 60W Cable Length: 15ft per transducer Frequency: Multi-frequency ultrasonic sweep algorithm (20kHz-42kHz) Installation Overview: No Thru-Hulls: The transducers are installed directly on top of your hull surface using the provided epoxy. Install Signal Cable: Each transducer has 15ft of connected signal cable. This ensures an easy installation from the transducer to the controller. Mounting the Controller: The BPS-1 Controller runs off of your boat's existing house battery. It is a simple 2-wire connection the the battery bank or distribution panel. Enjoy Worry-Free Boating: That's it! Your BPS system is done! Let our advanced antifouling protection do its job. Each system is programmed with a multi-frequency sweeping algorithm to ensure that your boat has the best antifouling protection on the market. How the Technology Works: The Mechanism: The system emits high-frequency ultrasonic waves through the hull & drives, creating a microscopic barrier of resonance. Targeting the Root Cause: These ultrasound waves repel biofouling from attaching to your hull before they ever have the chance to attach. Eco-Friendly: 100% chemical-free. It does not leach pollutants into the water, making it safe for marinas with strict environmental regulations. Marine Life Safe: The frequencies used are outside the hearing range of marine mammals and humans. Benefits: Fuel Efficiency: A clean hull creates less drag. Maintaining hull smoothness ensures you get the best possible MPG and top speed. Reduced Maintenance Costs: Significantly extends the life of your bottom paint and reduces the frequency of expensive haul-outs. Diver Savings: Reduces the need for monthly hull cleaning services. Hard-to-Reach Protection: Unlike paint, ultrasonic waves resonate through complex parts that are difficult to paint and clean, such as stern drives, sea strainers, and rudders. Fit & Forget: Once installed, the system runs automatically with zero scheduled maintenance required. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

PRO-2 2-Transducer Ultrasonic Antifouling System - 24VDCThe PRO-2 is a two-transducer system that can add antifouling protection to hulls, drives, rudders, stabilizers, and more. This single system can provide ultrasonic antifouling protection for hulls up to 40ft in length or can be combined with additional systems for larger vessels. The PRO-2 can also be tasked with protecting drives and rudders.The PRO-2 Package Includes: 1x PRO-2 Control Module with Integrated Power Cable 2x Submersible Ultrasonic Transducers with 15ft of Cable 1x Epoxy Kit 1x Printed Installation and Operation Manual Specifications: Voltage: 24V DC Average Power Draw: 0.5Ah Transducer Strength: 120W Cable Length: 15ft per transducer Frequency: Multi-frequency ultrasonic sweep algorithm (20kHz-42kHz) Installation Overview: No Thru-Hulls: The transducers are installed directly on top of your hull surface using the provided epoxy. Install Signal Cable: Each transducer has 15ft of connected signal cable. This ensures an easy installation from the transducer to the controller. Mounting the Controller: The BPS-1 Controller runs off of your boat's existing house battery. It is a simple 2-wire connection the the battery bank or distribution panel. Enjoy Worry-Free Boating: That's it! Your BPS system is done! Let our advanced antifouling protection do its job. Each system is programmed with a multi-frequency sweeping algorithm to ensure that your boat has the best antifouling protection on the market. How the Technology Works: The Mechanism: The system emits high-frequency ultrasonic waves through the hull & drives, creating a microscopic barrier of resonance. Targeting the Root Cause: These ultrasound waves repel biofouling from attaching to your hull before they ever have the chance to attach. Eco-Friendly: 100% chemical-free. It does not leach pollutants into the water, making it safe for marinas with strict environmental regulations. Marine Life Safe: The frequencies used are outside the hearing range of marine mammals and humans. Benefits: Fuel Efficiency: A clean hull creates less drag. Maintaining hull smoothness ensures you get the best possible MPG and top speed. Reduced Maintenance Costs: Significantly extends the life of your bottom paint and reduces the frequency of expensive haul-outs. Diver Savings: Reduces the need for monthly hull cleaning services. Hard-to-Reach Protection: Unlike paint, ultrasonic waves resonate through complex parts that are difficult to paint and clean, such as stern drives, sea strainers, and rudders. Fit & Forget: Once installed, the system runs automatically with zero scheduled maintenance required. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

PRO-4 4-Transducer Ultrasonic Antifouling System - 24VDCThe PRO-4 is a four-transducer system that can add antifouling protection to hulls, drives, rudders, stabilizers, and more. This single system can provide ultrasonic antifouling protection for hulls up to 60ft in length or can be combined with additional systems for larger vessels. The PRO-4 can also be tasked with protecting drives and rudders.The PRO-4 Package Includes: 1x PRO-4 Control Module with Integrated Power Cable 4x Submersible Ultrasonic Transducers with 15ft of Cable 2x Additional 15ft Extension Cables 1x Epoxy Kit 1x Printed Installation and Operation Manual Specifications: Voltage: 24V DC Average Power Draw: 1Ah Transducer Strength: 120W Cable Length: 15ft per transducer Frequency: Multi-frequency ultrasonic sweep algorithm (20kHz-42kHz) Installation Overview: No Thru-Hulls: The transducers are installed directly on top of your hull surface using the provided epoxy. Install Signal Cable: Each transducer has 15ft of connected signal cable. This ensures an easy installation from the transducer to the controller. Mounting the Controller: The BPS-1 Controller runs off of your boat's existing house battery. It is a simple 2-wire connection the the battery bank or distribution panel. Enjoy Worry-Free Boating: That's it! Your BPS system is done! Let our advanced antifouling protection do its job. Each system is programmed with a multi-frequency sweeping algorithm to ensure that your boat has the best antifouling protection on the market. How the Technology Works: The Mechanism: The system emits high-frequency ultrasonic waves through the hull & drives, creating a microscopic barrier of resonance. Targeting the Root Cause: These ultrasound waves repel biofouling from attaching to your hull before they ever have the chance to attach. Eco-Friendly: 100% chemical-free. It does not leach pollutants into the water, making it safe for marinas with strict environmental regulations. Marine Life Safe: The frequencies used are outside the hearing range of marine mammals and humans. Benefits: Fuel Efficiency: A clean hull creates less drag. Maintaining hull smoothness ensures you get the best possible MPG and top speed. Reduced Maintenance Costs: Significantly extends the life of your bottom paint and reduces the frequency of expensive haul-outs. Diver Savings: Reduces the need for monthly hull cleaning services. Hard-to-Reach Protection: Unlike paint, ultrasonic waves resonate through complex parts that are difficult to paint and clean, such as stern drives, sea strainers, and rudders. Fit & Forget: Once installed, the system runs automatically with zero scheduled maintenance required. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

BPS-2 2-Transducer Ultrasonic Antifouling System - 12VDCThe BPS-2 is a two-transducer system that can add antifouling protection to hulls, drives, rudders, stabilizers, and more. This single system can provide ultrasonic antifouling protection for hulls up to 30ft in length or can be combined with additional systems for larger vessels. The BPS-2 can also be tasked with protecting drives and rudders.The BPS-2 Package Includes: 1x BPS-2 Control Module with Integrated Power Cable 2x Submersible Ultrasonic Transducers with 15ft of Cable 1x Epoxy Kit 1x Printed Installation and Operation Manual Specifications: Voltage: 12V or 24V DC Average Power Draw: 0.5Ah Transducer Strength: 60W Cable Length: 15ft per transducer Frequency: Multi-frequency ultrasonic sweep algorithm (20kHz-42kHz) Installation Overview: No Thru-Hulls: The transducers are installed directly on top of your hull surface using the provided epoxy. Install Signal Cable: Each transducer has 15ft of connected signal cable. This ensures an easy installation from the transducer to the controller. Mounting the Controller: The BPS-1 Controller runs off of your boat's existing house battery. It is a simple 2-wire connection the the battery bank or distribution panel. Enjoy Worry-Free Boating: That's it! Your BPS system is done! Let our advanced antifouling protection do its job. Each system is programmed with a multi-frequency sweeping algorithm to ensure that your boat has the best antifouling protection on the market. How the Technology Works: The Mechanism: The system emits high-frequency ultrasonic waves through the hull & drives, creating a microscopic barrier of resonance. Targeting the Root Cause: These ultrasound waves repel biofouling from attaching to your hull before they ever have the chance to attach. Eco-Friendly: 100% chemical-free. It does not leach pollutants into the water, making it safe for marinas with strict environmental regulations. Marine Life Safe: The frequencies used are outside the hearing range of marine mammals and humans. Benefits: Fuel Efficiency: A clean hull creates less drag. Maintaining hull smoothness ensures you get the best possible MPG and top speed. Reduced Maintenance Costs: Significantly extends the life of your bottom paint and reduces the frequency of expensive haul-outs. Diver Savings: Reduces the need for monthly hull cleaning services. Hard-to-Reach Protection: Unlike paint, ultrasonic waves resonate through complex parts that are difficult to paint and clean, such as stern drives, sea strainers, and rudders. Fit & Forget: Once installed, the system runs automatically with zero scheduled maintenance required. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

BPS-8 8-Transducer Ultrasonic Antifouling System - 12VDCThe BPS-8 is an eight-transducer system that can add antifouling protection to hulls, drives, rudders, stabilizers, and more. This single system can provide ultrasonic antifouling protection for hulls up to 80ft in length or can be combined with additional systems for larger vessels. The BPS-8 is also the perfect solution for vessels under 52' with inboards or sail drives to have one system covering the entire vessel.The BPS-8 Package Includes: 1x BPS-8 Control Module with Integrated Power Cable 8x Submersible Ultrasonic Transducers with 15ft of Cable 4x Additional 15ft Extension Cables 2x Epoxy Kits 1x Printed Installation and Operation Manual Specifications: Voltage: 12V or 24V DC Average Power Draw: 2Ah Transducer Strength: 60W Cable Length: 15ft per transducer Frequency: Multi-frequency ultrasonic sweep algorithm (20kHz-42kHz) Installation Overview: No Thru-Hulls: The transducers are installed directly on top of your hull surface using the provided epoxy. Install Signal Cable: Each transducer has 15ft of connected signal cable. This ensures an easy installation from the transducer to the controller. Mounting the Controller: The BPS-1 Controller runs off of your boat's existing house battery. It is a simple 2-wire connection the the battery bank or distribution panel. Enjoy Worry-Free Boating: That's it! Your BPS system is done! Let our advanced antifouling protection do its job. Each system is programmed with a multi-frequency sweeping algorithm to ensure that your boat has the best antifouling protection on the market. How the Technology Works: The Mechanism: The system emits high-frequency ultrasonic waves through the hull & drives, creating a microscopic barrier of resonance. Targeting the Root Cause: These ultrasound waves repel biofouling from attaching to your hull before they ever have the chance to attach. Eco-Friendly: 100% chemical-free. It does not leach pollutants into the water, making it safe for marinas with strict environmental regulations. Marine Life Safe: The frequencies used are outside the hearing range of marine mammals and humans. Benefits: Fuel Efficiency: A clean hull creates less drag. Maintaining hull smoothness ensures you get the best possible MPG and top speed. Reduced Maintenance Costs: Significantly extends the life of your bottom paint and reduces the frequency of expensive haul-outs. Diver Savings: Reduces the need for monthly hull cleaning services. Hard-to-Reach Protection: Unlike paint, ultrasonic waves resonate through complex parts that are difficult to paint and clean, such as stern drives, sea strainers, and rudders. Fit & Forget: Once installed, the system runs automatically with zero scheduled maintenance required. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

BPS-4 4-Transducer Ultrasonic Antifouling System - 12VDCThe BPS-4 is a four-transducer system that can add antifouling protection to hulls, drives, rudders, stabilizers, and more. This single system can provide ultrasonic antifouling protection for hulls up to 50ft in length or can be combined with additional systems for larger vessels. The BPS-4 can also be tasked with protecting drives and rudders.The BPS-4 Package Includes: 1x BPS-4 Control Module with Integrated Power Cable 4x Submersible Ultrasonic Transducers with 15ft of Cable 2x Additional 15ft Extension Cables 1x Epoxy Kit 1x Printed Installation and Operation Manual Specifications: Voltage: 12V or 24V DC Average Power Draw: 1Ah Transducer Strength: 60W Cable Length: 15ft per transducer Frequency: Multi-frequency ultrasonic sweep algorithm (20kHz-42kHz) Installation Overview: No Thru-Hulls: The transducers are installed directly on top of your hull surface using the provided epoxy. Install Signal Cable: Each transducer has 15ft of connected signal cable. This ensures an easy installation from the transducer to the controller. Mounting the Controller: The BPS-1 Controller runs off of your boat's existing house battery. It is a simple 2-wire connection the the battery bank or distribution panel. Enjoy Worry-Free Boating: That's it! Your BPS system is done! Let our advanced antifouling protection do its job. Each system is programmed with a multi-frequency sweeping algorithm to ensure that your boat has the best antifouling protection on the market. How the Technology Works: The Mechanism: The system emits high-frequency ultrasonic waves through the hull & drives, creating a microscopic barrier of resonance. Targeting the Root Cause: These ultrasound waves repel biofouling from attaching to your hull before they ever have the chance to attach. Eco-Friendly: 100% chemical-free. It does not leach pollutants into the water, making it safe for marinas with strict environmental regulations. Marine Life Safe: The frequencies used are outside the hearing range of marine mammals and humans. Benefits: Fuel Efficiency: A clean hull creates less drag. Maintaining hull smoothness ensures you get the best possible MPG and top speed. Reduced Maintenance Costs: Significantly extends the life of your bottom paint and reduces the frequency of expensive haul-outs. Diver Savings: Reduces the need for monthly hull cleaning services. Hard-to-Reach Protection: Unlike paint, ultrasonic waves resonate through complex parts that are difficult to paint and clean, such as stern drives, sea strainers, and rudders. Fit & Forget: Once installed, the system runs automatically with zero scheduled maintenance required. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Lightspeed Light Foul-Release Coating Covers Approximately 4 Lights Underwater LightsMore Light. Less Fuss. Keep your lights shining bright all season long. Underwater lights are just as susceptible to marine fouling as any other underwater surface which can result in reduced visible light, and efforts to remove barnacles can result in damaged lighting components. Lightspeed is a transparent coating that is an easy and affordable way for boat owners to reduce maintenance, protect their investment, and maintain lighting system performance. Lightspeed has been shown to save three times its retail value in maintenance costs, on top of the unquantifiable damage to marine ecosystems caused by traditional antifouling products. Features: Lightspeed is a transparent coating that is an easy and affordable way for boat owners to reduce maintenance, protect their investment, and maintain lighting system performance Don’t risk damage to delicate components caused by scraping away hard marine growth Lightspeed also promises worry-free 12-24 months with reduced maintenance Lightspeed protects your aesthetic features, while not interfering with the light transmittance Endorsed and tested by Lumishore to ensure there is no drop in lumen output, no shift in color nor adverse effects on the lighting system performance Technical Specifications:Coverage Rate - 1ft² (four (4) average size underwater lights)In the Box: Lightclean wipe Application brush Lightspeed Clear Coat - 15ml *Sold as an Individual

Read more less

Foulfree Transducer Coating Formulated by industry-leading scientists and certified by Airmar for transducers.   Fouling on the face of transducers can reduce their sensitivity, bottom-echo returns and positive fish targets.  It can also increase the turbulence over the face of the transducer causing aeration and loss of bottom contact.  Foulfree keeps transducers clean and operating at the top of their game for the clearest sonar images possible.  The proprietary clear coat forms a slick surface that marine growth can’t grab onto, keeping your transducer surface clean and clear. Features: Foulfree™ is simple to apply and lasts for 12-24 months Transducer safe - Airmar certifies that Foulfree™ coating on its transducers results in no loss in transducer performance Biocide Free - Foul-release, not antifoul.  Foul-release coatings use physical means to reduce fouling, creating a surface that’s tough for marine organisms to adhere to Easy to apply A foul-free transducer equals more clarity, detail, and visibility below the waterline. Technical Specifications: Coverage Rate - 1ft² (two (2) average size transducers) In the Box: Abrasive pad XDclean wipe XDprime, wipe Applicator brush Foulfree Clear coat - 15ml *Sold as an IndividualThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Type: Service Kits Box Dimensions: 2"H x 2"W x 6"L WT: 0.15 lbs UPC: 9421903335425 Quick Guide (pdf)

Read more less

Activator - 60mlPart of a two-component 4:1 etching primer. Once mixed with the PropOne Primer Coat, the Primer chemically dries to protect metallic surfaces against corrosion and allow adhesion of the PropOne Clear Coat. Suitable for ferrous & non-ferrous metals.NOTE: This product is the PropOne Primer Activator only. Other components are sold separately.PropOne is a non-toxic foul-release coating that prevents sea life from adhering to propellers and underwater running gear.  It is used on thousands of boats worldwide every year, with a proven track record of over 8 years. Non-stick, super slick coating that lasts 1-2 years in water! It works, it’s the one. No.1 Foul release coating for propellers and running gear. Proven season after season to keep your propellers and running gear clean. PropOne is used on many thousands of boats worldwide every year, with a proven track record of over 8 years.

Read more less