Boat Outfitting - Bow Thrusters

Thruster Cable - 6MThe Quick TCDEX is a control extension cable used on the Quick BTQ bow thruster series to connect the bow or stern thruster system to the TCD remote panel control system.

Read more less

V-CAN Power Supply  - 12V Input Output Max 5AThe CANVPS is set to replace the BPCABCPC, bringing a new level of reliability and protection to your V-CAN installations. This advanced power supply is designed to secure connected nodes and safeguard the V-CAN network against connection errors, overcurrent, overvoltage, and reverse polarity. With the CANVPS, you can be confident in the stability and safety of your V-CAN system.The CANVPS offers versatile installation options, allowing it to be placed at the beginning, middle, or end of the V-CAN line. This flexibility ensures that your specific setup requirements are met without compromising on performance or protection.It is important to note that each V-CAN line should have only one 12V power supply and must start and end with a V-CAN terminating resistor (CANVT). For V-CAN lines exceeding 40 meters, the installation of a CANrepeater (CANR) is essential to maintain signal integrity and optimal performance.With the CANVPS, you are assured of a robust and secure power supply that enhances the overall reliability of your V-CAN installations.

Read more less

RRC R902 Radio Remote Control Receiver - 2 RelaysFeatures: Number of relays - 2 Full power range (from 10.5 to 31Vdc). Relay current carrying capacity - 15 A Power absorption in stand-by mode - 25 mA Microcontroller-operated functions. FSK modulation and carrier frequency 913Mhz Operating temperatures from -15°C to +70°C Indication of the system operating status, errors and problems by means of LED and seven-segment display Protection against polarity inversion Protection against low battery 50 transmitters can be stored Translation mode to activate more receivers, installed in different spots, by means of one transmitter Programmable digital filter

Read more less

Bow Thruster BTQ 125-40 40KGF - 12V - D125 - 2.2kWBetter Performances, Lower AbsorptionThe 4-blade Propellers guarantee maximum thrust performance and reduction in current absorption. They are made of composite materials, resistant in every condition. The counter-rotating system offers better thrust performances. The two props have been designed to suit left side and right side, to guarantee the same upper performances in both directions.Features: The Gearbox is created so that the behavior of the propeller is unaffected in either direction. The bronze propeller gearleg is provided with a hydrodynamic profile that minimizes turbulence. Maintenance is not required since the special highly resistant components guarantee a perfect lubrication seal for life. The anodic aluminum protection is easily replaceable. In case of total corrosion of the anode, the prop doesn’t get lost because it’s fixed directly to the pod, independently from the anode. The elastic joint that optimizes the alignment between motor and gearbox is an exclusive Quick design. This acts as an even tension device, preserving the operating system from impulses from the bow thruster, with above-average results. The MotorsNew-generation materials have been chosen to constantly guarantee required output and maximum performance, given the severe conditions required by the application.Top SafetyIn case of relays’ melting, the TMS remote circuit breaker system switch-off the power to the motor from any place where a TDC panels or a TSC emergency mushroom panels are installed. Motor temperature sensor BTQ motors don’t need the thermic sensor to be able to always provide the maximum power when needed. The overheating protection is controlled by the software inside the touch panel or the joystick panel.

Read more less

Rotating Hose Connection for LP, LSS & NLP - 40mmReplacement rotating Inlet hose port for VETUS LP40, LSS40 and NLP40 Waterlock Mufflers. Supplied complete with O Rings.

Read more less

TCD2022 Thruster Push Button ControlThe traditional TCD/WCD/TSC controls have been renewed. The updated design matches the style of the QNC Quick Nautical Control commands, which feature a glossy black tempered glass panel.The TCD/WCD/TSC controls differ from the QNC range in the choice of materials, in fact, they feature a special and scratch-resistant glossy Lexan instead of the tempered glass.The fixing method is different as well: the traditional screws have been replaced by a special 3M VHB double-sided gasket which allows for faster installation.The technical and operating characteristics of the TCD/WCD/TSC controls are identical to the previous models. Quick Guide (pdf)

Read more less

V-CAN 3-Point Y-HubThe CANVHUB is a groundbreaking advancement for V-CAN installations, designed to elevate your hardware mounting and cable management experience, specifically tailored for boat builders. This state-of-the-art hub replaces the older BPCANHUB, providing significant improvements with its innovative 3-point hub configuration. This design ensures a more organized, streamlined, and efficient installation process, saving you time and reducing complexity.The CANVHUB is particularly essential for devices like the CANverter that have a single CAN connector. It adeptly converts one male connector into two female connectors, facilitating seamless connectivity across your V-CAN network. This capability aligns perfectly with the needs of other V-CAN devices, ensuring consistent and reliable communication throughout your system.Crucially, the CANVHUB maintains the integrity of the V-CAN line as a daisy-chain. This is vital because splitting the main line can lead to significant performance issues. By keeping the V-CAN line as a continuous chain, the CANVHUB preserves optimal performance and reliability, preventing potential disruptions and ensuring smooth operation.The hub’s design simplifies the installation process, allowing for easier cable management and hardware mounting. This not only enhances the overall aesthetic of your setup but also reduces the potential for errors and maintenance needs, contributing to long-term system stability and performance.

Read more less

Neutral Button Kit for SICO & SISCOFeatures: Neutral Button Kit Specifically for VETUS SICO and SISCO

Read more less

1M VCAN BUS Cable Hub to ThrusterFeatures: 1M  VCAN BUS Cable  Hub to Thruster

Read more less

Fuse Strip C30 - 125 AmpFeatures: Fuse Strip C30 125 Amp

Read more less

Bow Thruster Panel w/Joystick & Time LapseSingle joystick panel for operating a Vetus bow or stern thruster. Supplied with quick connectors for BP29 series wiring harnesses. Capable of daisy chaining additional controls for multiple stations.Features: Protected against accidental or unauthorized operation Panel power on indicator Control circuit overload protection Built-in time lapse device when reversing the direction of rotation Automatic switch off after 30 minutes inactivity. This feature is user selectable during installation In the event of continuous running for more than 2 minutes there is a warning LED and buzzer and the thruster will switch off automatically. The panel will reset itself after 5 seconds. Watertight to IP 66 Dimensions: 85mm x 85mm This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)

Read more less

Rubber Bellows for Joysticks Replacement rubber bellows for Vetus joysticks.Compatible With: BPAJ joystick BPJ5D joystick BPJDE2 joystick BPJDSE joystick BPJE2 joystick BPJR joystick BPJSE joystick BPJSTA joystick BPJSTH5 joystick EHPJSTA joystick *Sold as an Individual

Read more less