Boat Outfitting - Deck / Galley

LPG (Propane) Low Pressure Connection Kit This preassembled, leak tested, hose allows you to connect your Magma gas grill to a pre-regulated, low pressure LPG (Propane) fuel system.*Must be used with Magma ValveIn the Box: One (1) Brass 3/8" flare fitting 10' (3 M) Hose *Sold as an Individual 

Read more less

Flush DrinkholderCut-Out: 3-7/8"Outer Diameter: 4-3/8"Depth: 2-1/4" - 3-1/8"Material: 304 Stainless Steel Includes mounting gasket, pad & 3/8" drain tube Fits cans, bottles & can coolers

Read more less

Door Handle Latch - Locking - Investment Cast 316 Stainless SteelThis Locking Door Handle Latch is highly polished for a modern, sleek look. Features open from outside deadbolt with cylinder lock mechanism. Includes strike plate, mounting template and two keys. For doors 3/4” – 1-1/2” thick. Constructed of corrosion resistant investment cast 316 stainless steel. Latch and strike plate install with four #8 FH fasteners (not included). WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Round Tube Rail Mount Fillet Table - 30" Features: Solid one-piece construction for long life and easy maintenance Mounting system includes: Rail mount adapter, Rail mount clamps (pr), and all assembly hardware UV stabilized high-density polypropylene construction Large table is 30" by 12-5/8" deep Fits round tubing 3/4"-1-1/4" diameter Easily accessible knife and pliers holders, large table features additional hose holder and towel bar Knives and pliers not included WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Width: 30" Box Dimensions: 3"H x 17"W x 34"L WT: 9.4 lbs UPC: 035514326797

Read more less

Removable Cookware Handle Replacement handle for cookware.Technical Specifications: Material - Cast Thermo Plastic w/ Stainless Steel Heat Shield  Weight - .49 lb (.23 kg) *Sold as an Individual 

Read more less

2-3/8" Stowable Post ClipsConveniently stow your 2-3/8″ posts when not in use. (sold in pairs, for bulk see #2400104).

Read more less

Cockpit Table with Folding Leaves & 4 Cupholders - TeakFeatures: Table top dimensions - Closed - 16"W x 24"L, Open - 32"W x 24"L Brass hinges/stainless steel hardware The drink holder holds 4 glasses or 2 glasses and pair of binoculars Fold-down support leg - 30-1/2" long Installs on 7/8" or 1" diameter tubing pedestal steering guards with included nylon steering pedestal clamps (P/N 61395) Installs without drilling pedestal guard 2-brass barrel bolts (P/N 585B) included securing table leaves when the table is in the folded position The unit can be removed for storage by removing clamps Natural finish Some assembly required

Read more less

Flush Mount Cup Holder w/Blue LED Light - Stainless SteelLED Illuminated Flush Cup holder with Blue light Cut-Out: 3-3/4" O.D.: 4-1/4" Uses 12V battery power Comes with 6" wire leads Includes Thick Mounting Gasket, pad & 3/8" drain tube Fits cams, bottles & can coolers

Read more less

Blue Hose with Flex Relief - 25'HoseCoil 25' HP Self Coiling Hose with Flex Relief are lightweight, self-coling hoses. The hoses are built with standard 3/4" field serviceable soild brass fittings, and HoseCoil's newly upgraded (HP) high performance Polyether material. A HoseCoil hose is the the perfect solution for using and storing a hose.Features: Polyurethane Light Weight - Easy to use Self Coiling - Easy to stow 85-90% Usable Length - Excellent extendibility Solid Brass/Stainless Steel Connectors - Improved flow rate and rust free use 360 Gallons per Hour Flow Rate High Quality Brass or Stainless Steel Fittings *Replaces the HS2500U Specifications: Type: Tools & Accessories Box Dimensions: 5"H x 6"W x 21"L WT: 1.9 lbs UPC: 659988107579

Read more less

Large Stainless Steel Cupholder (Fits YETI)Features: Wider mouth fits larger water bottles and can coolers (including Most Yeti Sizes) Drink pad made with UV-resistant vinyl for longer life Drink pad cushions a beverage Vinyl pad affixed without adhesive Includes Thick Mounting tap & 3/8" drain tube Specifications: Material: 316 Stainless Steel For Use In: Freshwater and Saltwater Cut Out: 4-1/8" O.D.: 4-11/4" Depth: 3-1/8"

Read more less

40" x 80" 6mm Two Color Full Sheet - Brushed Texture - Cool Grey/Black (1016mm x 2032mm x 6mm)The SeaDek Full Sheet is perfect for DIY boat flooring projects. This sheet features two colors, a modern brushed texture, and non-skid qualities for optimal comfort.Specifications: Colors: Cool grey/black Dimensions: 40″ x 80″ (1016mm x 2032mm) Material Thickness: 6mm Texture: Brushed

Read more less

Large Helm Pad - Cool Grey/Storm GreyAre you tired of a throbbing back or knees after a long day of fishing?  Our Helm Pads will be your go-to anti-fatigue pad for longer and more comfortable days on the water.  Helm Pads are the perfect way to add extra comfort and protection to your boat’s helm.SeaDek's softest, most comfortable Helm Pad yet.  Your knees and back will thank you after a day on our Dual-Density helm pad.  No boat is complete without this essential addition, featuring an ultra-comfortable, low-density .67" foundation with our legendary standard .1" brushed top layer for traction and durability. The Dual Density Helm Pads utilize a 3M adhesive for an easy peel-and-stick installation.Technical Specifications: Dimensions  (L x W x Thickness) - 39" x 16"" x .8" Color - Cool Grey/Storm Grey Material - Closed cell PE/EVA foam *Sold as an Individual

Read more less