Boat Outfitting - Fuel Systems

3/8" x 50' Boxed Low Permeation Type A1-15 Fuel Line Hose - BlackTrident Barrier Lined A1-15 Fuel Hose for both gasoline (including ethanol blends up to 85%) and diesel (including bio diesel blends up to B100). This hose is built with the best fuel, fire, and age-resistant formulation, and a unique "Barrier Liner" on the inside surface of the tube, so fuel is not in direct contact with rubber.Features:  Provides extraordinary resistance to fuel permeation, aging, and also to fire, heat, cold, and the ozone  Also provides excellent bend-ability NMMA Type Accepted & CE certified Application: Marine Fuel Hose (distribution, return, vent and transfer) For all marine fuels including gasoline, alcohol blends (CE-10), diesel and bio-diesel Construction: Tube: Nylon Internal Barrier, NBR  Cover: NBR/PVC Blend  Reinforcement: Polyester 2 spiral  Temperature Range: -20°F to 212°F (-28ºC to 100ºC)  Length: 50 ft. (15 m) Boxed Specifications: Inner Diameter: (inch) 3/8" / (mm) 9.50 Outer Diameter: (inch) 0.681 / (mm) 17.3 Burst Pressure: (psi) 400 / (mpa) 2.76 Working Pressure: (psi) 100 / (mpa) 0.69 Bend Radius: (inch) 2" / (mm) 50.8 Weight: (lb/100 ft.) 15.6 / (kg/m) 0.233 Permeation Rate: <10 (Standard is 10g/m2/24 hrs (CE10) *The #365 series exceeds ABYC H-24 & H-33, SAE J1527, ISO 7840, USCG Type A1-15; CARB Executive Order RM-17-008 and EPA Certified low permeation Type A1-10 Quick Guide (pdf)

Read more less

Primer Bulb - 3/8" Inner Diameter HoseThis Atwood Primer Bulb is engineered and constructed to deliver the most reliable priming and long-term leak-free performance. The exclusive three-layer construction prevents collapse under vacuum and prevents ballooning or bursting under pressure. The low-permeation material prevents fuel evaporation, and this bulb delivers 60 percent more output per pump than leading competitors.Features: It is intended for use with a 3/8-inch interior diameter hose Exclusive high-efficiency check-valves deliver faster priming and low fuel restriction (less than 1kPa restriction at 50 liters/hour) Engineered hose barbs and stainless steel stepless clamps ensure leak-free performance This bulb is compatible with Ethanol blended fuels, and it is EPA and CARB certified Quick Guide (pdf)

Read more less

Standard Carbon CanisterCarbon canister systems utilize an engineered charcoal canister to reduce hydrocarbons entering the atmosphere. Other components of a carbon canister system are designed to ensure the tank fills to the proper level every time without spit-back or well-back. All Attwood carbon canister systems are designed to ensure liquid fuel or water does not reach the canister and are compatible with Jerry Can and marine nozzle refueling.Features: Brackets OEM Installed Low permeation shell reduces overall system emissions Can be mounted in any orientation using brackets provided EPA / CARB Certified Fits a 5/8" vent hose Specifications:  Trailerable Vessel Capacity (EPA Rating): 220 Gallon Non-Trailerable Vessel Capacity (EPA Rating): 350 Gallon Trailerable Vessel Capacity (CARB Rating): 176 Gallon Non-Trailerable Vessel Capacity (CARB Rating): 350 Gallon  *Compatible with Ethanol blended fuels Quick Guide (pdf)

Read more less

Deck Fill for Carbon Canister System - Straight Body & Scalloped Stainless Steel CapPressure relief systems are designed with automatic diurnal emission control and overpressure relief safety valves built into the cap of the fill. The overpressure relief safety valves are engineered to release pressure above 1 psi. The high-flow vacuum valves allow fresh air to enter the fuel tank to replace the fuel being consumed by the engine. Other components of a pressure relief system are designed to ensure the tank fills to the proper level every time without spit-back or well-back. Features: All Attwood pressure relief systems are designed to ensure water does not enter the fuel tank and are compatible with Jerry Can and marine nozzle refueling Fits 1-1/2 (inch) fill hose Designed and tested to prevent water from entering the fuel system Compatible with Ethanol blended fuels Stainless Steel finish EPA / CARB Certified Dual 1 psi overpressure relief safety valves built into the deck fill caps Automatic nozzle shutoff 4-18 gpm Quick Guide (pdf)

Read more less

Deck Fill for Carbon Canister System - Straight Body & Scalloped Chrome CapPressure relief systems are designed with automatic diurnal emission control and overpressure relief safety valves built into the cap of the fill. The overpressure relief safety valves are engineered to release pressure above 1 psi. The high-flow vacuum valves allow fresh air to enter the fuel tank to replace the fuel being consumed by the engine. Other components of a pressure relief system are designed to ensure the tank fills to the proper level every time without spit-back or well-back. Features: All Attwood pressure relief systems are designed to ensure water does not enter the fuel tank and are compatible with Jerry Can and marine nozzle refueling Fits 1-1/2 (inch) fill hose Designed and tested to prevent water from entering the fuel system Compatible with Ethanol blended fuels Chrome finish Automatic nozzle shutoff 4-18 gpm Dual 1 psi overpressure relief safety valves built into the deck fill caps EPA / CARB Certified Quick Guide (pdf)

Read more less

3/4" Flex Marine Wet Exhaust & Water Hose - Black - Sold by the FootTrident Flex wet exhaust hose for longer bent connections. In smaller I.D.s for engine intake, critical water, drain, scupper bilge & sanitation uses. Resists heat, ozone, exhaust, panting, and collapse. Black High Temp EDPM Rubber 250°F (121°C) Max.Features:  Sold by the foot Extra heavy tube and cover with wire helix between 2-ply reinforcement provides excellent flexibility and bend radius  Resists heat, ozone, exhaust, sani chemicals, panting, and collapse Exceeds SAE J2006-R2, ABYC & NMMA P-1 exhaust standards, and Lloyd’s Registry Type Approved Application: Trident Flex wet exhaust hose for longer bent connections In smaller I.D.s for engine intake, critical water, drain, scupper bilge & sanitation uses Construction: Tube & Cover: High temp EDPM rubber Color: Black with blue stripe Reinforcement: Multi-ply, high-tenacity polyester, steel helix Temperature Range: 250°F (121°C) Specifications: Inner Diameter: (inch) 3/4" / (mm) 20 Outer Diameter: (inch) 1.15" / (mm) 29 Working Pressure: (Psi) 100 / (bar) 6.9 Bend Radius: (inch) 1" / (mm) 25 Weight: (Lb./50ft.) 23 / (Kg/m) 10.3 *Burst Pressure is 4 x Working Pressure Quick Guide (pdf)

Read more less

Honda 3/8" Barb Female Hose Fitting - 90HP+This Attwood hose fitting is suitable for use with leaded, unleaded, ethanol-blended, and alcohol-blended fuels. The barb fitting fits 3/8" I.D. (Inner Diameter) hose. Clamps are not included and use thread sealant on all threads.Features: Honda fuel fitting Designed for 90HP+ (Large Bore)  Material Construction: Chrome-plated Brass *Specifically mates to Attwood part number: 8901-6 Quick Guide (pdf)

Read more less

Mercury Fuel Line Kit - 3/8" Dia. x 6' Length with Fuel Demand ValveThis EPA-certified Attwood Mercury Fuel Line Kit reliably delivers fuel to your Mercury engine and provides the ultimate in performance, safety, and value. The kit comes with a 6-foot-long, 3/8-inch diameter low-permeation fuel line that is designed to prevent kinking and hardening, and is rated up to 100 degrees C.Features: These Attwood Fittings Are Included: Tank fitting 8838TM6, tank end hose fitting 8838HF6, and engine end hose fitting 8896LP6 It also includes a multi-layer low-permeation primer bulb and a Fuel Demand Value that eliminates engine flooding and spillage by preventing pressurized fuel from reaching the engine. Hose and tank fittings come with pre-applied thread sealant For Mercury engines and tanks Tank Side: Universal Sprayless Quick-Connect *This Fuel Line Kit is compatible with Ethanol blended fuels and with all OEM-brand engines Quick Guide (pdf)

Read more less

Honda Fuel Line Kit - 3/8" Diameter x 6' LengthThis EPA-certified Attwood Honda Fuel Line Kit reliably delivers fuel to your Honda engine and provides the ultimate in performance, safety, and value. The kit includes a 6-foot-long, 3/8-inch diameter low-permeation fuel line that is designed to prevent kinking and hardening, and is rated up to 100 degrees C.Features: These Attwood Hose Fittings Are Included: Tank fitting 8838TM6, tank end hose fitting 8838HF6, and engine end hose fitting 8900-6 Hose and tank fittings come with pre-applied thread sealant There’s also a multi-layer, low-permeation primer bulb with connections engineered for strength, durability, and leak resistance For Honda engines and tanks This Fuel Line Kit is compatible with Ethanol blended fuels and with all OEM-brand engines *No Fuel Demand Valve is included in this kit Quick Guide (pdf)

Read more less

Portable Fuel Tank Cap with Tether - EPA CertifiedHigh-flow valve exceeds OEM engine fuel flow requirements. Be sure your fuel system is safe; the ratchet feature ensures a proper seal while the tether prevents cap loss. Very versatile; designed for 0 to 350 horsepower engines.Features: Standard 2 ¼ inch neck for convenience Includes high-flow automatic vacuum valve Tether Included Compatible with 8803LP/8806LP/8812LP/8812LLP Tanks Easy-to-grip cap features ratcheting noise so you know it’s properly sealed Quick Guide (pdf)

Read more less

Portable Fuel Tank - 12 Gallon with GaugeAttwood has engineered the industry’s only comprehensive EPA-certified fuel tank-to-engine solution. Tough materials and innovative design stand up to harsh marine conditions. A 12-gallon tank is ideal for pontoon boats where more fuel capacity is needed. Includes gauge.Features:  12 Gallon fuel capacity Compatible with 1/4-inch NPT fuel fittingsHigh-Contrast, easy to read gage Additional oil and ullage/vapor capacity EPA Cap with automatic, high-flow vacuum valve UV-grade multi-layer tank material Automotive-grade, multi-layer construction withstands the pressure build-up associated with closed fuel systems Cap with built-in vacuum valve means no need for manual venting Meets EPA and CARB (California Air Resources Board) regulations Complies with all ABYC/NMMA requirements for portable marine fuel tanks Dimensions: Length: (inch) 22.75" Width: (inch) 14.25" Height: (inch) 14.47" *No fuel line included Quick Guide (pdf)

Read more less

Portable Fuel Tank - 6 Gallon without GaugeAttwood has engineered the industry’s only comprehensive EPA-certified fuel tank-to-engine solution. Rugged materials and innovative design stand up to harsh marine conditions. 6-gallon tank adapts to virtually any outboard engine. Features: 6 Gallon fuel capacity Compatible with 1/4" NPT fuel fittings Additional oil and ullage/vapor capacity EPA Cap with automatic, high-flow vacuum valve Cap with built-in vacuum valve means no need for manual venting Automotive-grade, multi-layer construction withstands the pressure build-up associated with closed fuel systems Meets EPA and CARB (California Air Resources Board) regulations Complies with all ABYC/NMMA requirements for portable marine fuel tanks Dimensions: Length: (inch) 19.82" Width: (inch) 13.50" Height: (inch) 9.16" *No gauge or fuel line includedWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)

Read more less