Boat Outfitting - Horns

12V MiniBlast Compact Single Horn with Black CoverThe MiniBlast Compact Electric Horn features a long-lasting, non-corrosive ASA plastic cover and a sealed sound unit with stainless steel diaphragm.Features: Mounts in same hole pattern as the 10035 horn Dimensions: 4.375" L x 3.375" W x 2" H Maximum amp draw: 3 amps, 12 volt dB(A) rating: 106 at one meter (3 feet) Fundamental frequency: 430 +/- 20Hz Specifications: Voltage - Input Range (Volts): 12v Color: Black Box Dimensions: 3"H x 6"W x 9"L WT: 0.8 lbs UPC: 035028100982

Read more less

Mini Stainless Steel Single Drop-In Horn with Stainless Steel Grill - 12V Low PitchFeatures: All Stainless Steel Inside & Out 304 Stainless Steel inside and out including a sealed sound unit No rust Guaranteed for 5 years All meet ABYC A-23 for boats up to 12 meters Pre-wired It fits existing hole patterns Specifications: Dimensions: 3"L, 3-1/4"W, 1-3/4"H (7.5 x 8 x 4.5 cm) Max Amp Draw: 3 Amps. Grill Dimensions: 4-7/8" x 2-3/8" with 4" hole centers Rating: 106 dB @ 1 Meter Installed Specifications: Color: Stainless Voltage - Input Range (Volts): 12v Box Dimensions: 2"H x 5"W x 13"L WT: 1 lbs UPC: 768170100509

Read more less

Marine Hidden Horn - BlackFeatures: 12 or 24 Volt DC Systems For vessels under 12M (39.4') Uses "SETS" Horn Technology Draws less than 1/2 Amp Unit is Polarity Protected Solid state with no moving parts Built-in water evacuation drainage system Requires 2-1/4" hole Mounting gasket included Specifications: Color: Black Box Dimensions: 3"H x 6"W x 9"L WT: 0.3 lbs UPC: 601373540072

Read more less

12V Compact Single Trumpet Electric HornThe compact design of this trumpet horn makes it ideal for installation in smaller spaces.Features: 100 percent stainless steel exterior Type 304 stainless steel diaphragm Dimensions: 14" L x 3.5" W x 4" H Maximum amp draw: 3.5 amps 12 volt dB(A) rating: 108 at one meter Fundamental frequency: 420 +/- 20Hz Specifications: Voltage - Input Range (Volts): 12v Color: Stainless Box Dimensions: 4"H x 8"W x 17"L WT: 1.8 lbs UPC: 035028100104

Read more less

Marine Hull Mount Horn - WhiteFeatures: For vessels under 12 meters (39.4 ft.) 12 or 24 volt DC system Built-in water evacuation drainage system Specifications: Color: White Box Dimensions: 4"H x 6"W x 10"L WT: 0.45 lbs UPC: 601373542175

Read more less

Marine Hull Mount Horn - BlackFeatures: For vessels under 12 meters (39.4 ft.) 12 or 24 volt DC system Built-in water evacuation drainage system Specifications: Color: Black Box Dimensions: 4"H x 6"W x 10"L WT: 0.4 lbs UPC: 601373542076

Read more less

Marine Hidden Horn - White with Stainless Steel OverlayFeatures: 12 or 24 Volt DC Systems For vessels under 12M (39.4') Uses "SETS" Horn Technology Draws less than 1/2 Amp Unit is Polarity Protected Solid state with no moving parts Built-in water evacuation drainage system Requires 2-1/4" hole Mounting gasket included Specifications: Color: Stainless Box Dimensions: 3"H x 6"W x 9"L WT: 0.4 lbs UPC: 601373541130

Read more less

MaxBlast Air Horn - Mini Dual Trumpet MaxBlast Mini Dual Trumpet Air Horn is constructed of durable chrome plated brass. When installed, the trumpet should point slightly downward to permit water drainage. Display pack includes horn, compressor, air tubing, and mounting hardware. At 125 decibels and a frequency (Hz) of 630±15A/525±15A, this horn meets the US Coast Guard's COLREGS, US Inland Navigation Rules, Annex III Regulations, and ABYC standard A-23 for boats up to 20 meters (66’). 12VDC. Maximum: 20A. NMMA Type Accepted #2577058. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Voltage - Input Range (Volts): 12v Color: Chrome Box Dimensions: 4"H x 12"W x 16"L WT: 4.05 lbs UPC: 035514432160

Read more less

Drop-In Hidden Horn V.3 with Grills Drop-In Hidden Horn V.3 with Grills is constructed of powder coated steel and injection molded nylon. Kit includes horn plus one chrome and one white decorative billet screw-in grill. Hole size 2-3/4” diameter. At 111 decibels and a frequency (Hz) of 370±20A, this horn meets US Coast Guard's COLREGS and ABYC standard A-23 for use on vessels under 12m (39'). 12VDC. NMMA Type Accepted #2577066.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Voltage - Input Range (Volts): 12v Box Dimensions: 2"H x 9"W x 15"L WT: 0.85 lbs UPC: 035514432078

Read more less

Trumpet Air Horn Cover - 3-15/16" Diameter - 304 Stainless SteelThe Trumpet Horn Tube Cover fits all MaxBlast Trumpet Horns. Keeps green water and bugs from getting into the trumpet tube. Snaps over the end of the tube – no tools required. Constructed of corrosion resistant stamped 304 stainless steel.*Includes one (1) Trumpet Air Horn CoverWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: Stainless Box Dimensions: 2"H x 5"W x 7"L WT: 0.3 lbs UPC: 035514432429

Read more less

12V Electronic Horn with White GrillMarinco is the leading supplier of horns to the marine industry, with over fifty years of experience in designing and manufacturing sound devices specifically for use in harsh marine environments. Stainless steel is used for all critical components such as trumpets, motor cover, diaphragms, assembly and mounting hardware.Features: Electronic Piezo horn sound One piece water resistant housing, grill is molded to horn 107 dB(A) at one meter Fundamental frequency: 550 +/- 100Hz Mounts in a standard 2.25" opening Draws less than one amp, maximum draw: 0.8 amp Internal space requirements: 2.25" W x 2.25" H x 0.5" D Grill dimensions: 4.875" W x 2.75" H x 0.5" D Stainless steel grill cover (#11185) sold separately Specifications: Voltage - Input Range (Volts): 12v Color: White Box Dimensions: 3"H x 6"W x 7"L WT: 0.3 lbs UPC: 035028100821

Read more less

12V Dual Trumpet Electric HornMarinco is the leading supplier of horns to the marine industry, with over fifty years of experience in designing and manufacturing sound devices specifically for use in harsh marine environments. Stainless steel is used for all critical components such as trumpets, motor cover, diaphragms, assembly and mounting hardware. In the case of the XLP trumpet horns, the horn is given extra protection through the complete over-molding of the internal motor cover housing. It is this extra process that provides the added protection needed to back up the five-year warranty.Features: 5 Year Warranty 100 percent stainless steel exterior Type 304 stainless steel diaphragm Dimensions:18.5" L x 8" W x 5" H Maximum amp draw: 10 amps dB(A) rating: 123 at one meter Fundamental frequency: 370 +/- 20Hz ; 310 +/- 20Hz Specifications: Voltage - Input Range (Volts): 12v Color: Stainless Box Dimensions: 6"H x 12"W x 21"L WT: 3.5 lbs UPC: 035028902449

Read more less