Boat Outfitting - Hull Protection

Bowshield - Medium 7.5" x 9"Protect the bow of your boat from scuffs and abrasions caused by the trailer roller with the most durable bow guard on the market.The bow, much like the keel, is in a very vulnerable area in the front of the boat. The exposed bow can easily be scratched, torn, and worse from bumping into docks, trailer hitches, and bow rollers. This can cause some expensive damage to your boat. Don’t let that happen! Ensure that your bow area is protected with Gator Guards BowShield.Constructed of strong and durable 22 gauge, 316 marine grade mirror finish stainless steel, the small BowShield is 6.5" x 6" and fits bow rollers up to 5'' and the medium fits bow rollers up to 8''  The area where the BowShield gets installed needs to be smooth with no steps or chines to conform around.The BowShield has a pre-creased centerline for easy bending and fitting. It is easy to apply and comes complete with a 24-hour urethane adhesive for a permanent installation. It will not pop off like the peel-and-stick ones. Every BowShield comes with our three-year warranty.Features: Easy, DIY installation Eliminates costly repairs Increases the value of your boat Made of durable 316 marine-grade mirror-finished stainless steel Available in 2 sizes

Read more less

SkegShield® Skeg Guard for Mercury MarinerPrevent gearcase damage and protect your skeg with SkegShield® by Gator Guards. Installs in minutes to repair an already broken skeg with 27 American-made models engineered to fit your exact outboard or inboard. If your engine model is not listed, unfortunately, we do not have a model that will fit your specific needs.With your keel guarded and your bow shielded from damage, there is one part of the boat that is still exposed to excessive risk of damage, and that is your skeg. Gator Guards offers an extensive line of SkegShield skeg guards to protect your outboard or stern drive from damage.All SkegShields are made of 18-gauge, mirror finish polished 316 marine grade stainless steel. The SkegShield is further reinforced on the lower edge for protection that makes SkegShield twice as strong as any OEM skeg. SkegShield doesn’t stop there, we were the first to include a drain hole to prevent water retention & corrosion!27 Models available to fit your exact outboard or inboard engine. Mercury, Yamaha, Evinrude, Mercruiser, Mariner, Suzuki, Johnson, Honda, Force, Volvo Penta, and Tohatsu. Use the engine guide above to find your SkegShieldMercury/Mariner: 75 - 115 HP 4-stroke: 2015 - Current (Command Thrust & SeaPro) 135 - 200 HP 4-stroke: 2005 - 2018 (4.8" Case) 200 - 300 HP 2-stroke: 1996 - 2018 (Fits Optimax)  Features: The toughest repair and protection for your lower unit Easy DIY installation Reinforced lower edge for 2X the strength Shearable bolts prevent gearcase damage Drain hole to prevent water retention Made of durable 18-gauge 316 marine grade mirror polished Stainless Steel Prevent costly repairs Maintain the value of your boat 3-year warranty Installation Tips:All SkegShields are easy to install. There is no welding—no messy glue, adhesive or epoxy, and best of all no curing or down time. You’ll be back on the water in under 30 minutes and since we don’t have a foot or skid plate welded on the bottom we won’t affect your boat’s performance. If your motor is still under warranty – please check with your manufacturer about drilling holes in the skeg to mount a skeg guard.

Read more less

Megaware SkegPro® 02656 Stainless Steel Skegpro Model Guide  Mercury - 200 hp XR6 BlackMax EFI  Stop Damage To Your Boat's Skeg - Save Your Skeg & Enhance It's AppearanceMegaware SkegPro® protects your motor’s skeg against harsh marine environments. Its mirror-polished finish creates a custom look and lasting protection.Megaware SkegPro® Skeg ProtectorMegaware SkegPro® protects your motor's skeg against harsh marine environments. It conforms to your lower unit to ensure there is no discernible drag or compromise in performance. A drain hole keeps water from collecting and remaining stagnant. Skeg Pro®'s mirror-polished finish creates a custom look and lasting protection.Megaware SkegPro® is available in models to fit virtually any skeg.WarrantyMegaware guarantees your Megaware SkegPro® for a period of three years from the date of purchase. Please retain receipt for proof of purchase date.Features: Protects Against Ramp Dragging, Rock, Debris, and Submerged Objects Drain Hole Prevents Corrosion and Freezing A Model to Fit Virtually Any Skeg Do-It-Yourself Install in Less than 10 Minutes Specifications: Color: Stainless Box Dimensions: 1"H x 6"W x 16"L WT: 0.85 lbs UPC: 672057026564 Brochure (pdf)

Read more less

Megaware SkegPro® 02655 Stainless Steel Skeg Protector Model Guide Honda - BF 200, 225 hp -2006 Mercury/Mercruiser - Alpha One 1973-up, 40, 50 hp Big Foot 4 Stroke 2003-up, 60 hp Big Foot 4 Stroke, 75, 90, 115 hp 2 & 4 Stroke, EFI Saltwater 90 hp 2005, EFI Saltwater 115 4 Stroke 2003-up, Optimax 75, 90, 115 hp 2006, Optimax 250 hp -2006 & Tracker 75, 90 hp 2004 Suzuki - DT 90, 150, 150 S, 200, 225 hp & DF 150, 175, 200, 225, 250 Tohatsu/Nissan - DF 150, 175, 200, 225, 250 Yamaha - 90 hp 4 Stroke EFI 2004 & 250 hp 4 Stroke 2005 & 2008 Stop Damage To Your Boat's Skeg - Save Your Skeg & Enhance It's AppearanceMegaware SkegPro® protects your motor’s skeg against harsh marine environments. Its mirror-polished finish creates a custom look and lasting protection.Megaware SkegPro® Skeg ProtectorMegaware SkegPro® protects your motor's skeg against harsh marine environments. It conforms to your lower unit to ensure there is no discernible drag or compromise in performance. A drain hole keeps water from collecting and remaining stagnant. Skeg Pro®'s mirror-polished finish creates a custom look and lasting protection.Megaware SkegPro® is available in models to fit virtually any skeg.WarrantyMegaware guarantees your Megaware SkegPro® for a period of three years from the date of purchase. Please retain receipt for proof of purchase date.Features: Protects Against Ramp Dragging, Rock, Debris, and Submerged Objects Drain Hole Prevents Corrosion and Freezing A Model to Fit Virtually Any Skeg Do-It-Yourself Install in Less than 10 Minutes Specifications: Color: Stainless Box Dimensions: 1"H x 6"W x 16"L WT: 0.75 lbs UPC: 672057026557 Brochure (pdf)

Read more less

Lanocote Rust & Corrosion Solution Prop and Bottom - 16 oz. Natural Non-Toxic Anti-Foul CoatingLanoCote® Prop & Bottom™ is an economical and very effective marine foul release coating. Produced by boaters for boaters, it is a well-tested marine foul release based on lanolin and other biodegradable additives. When applied according to directions to metal props and running gear, it can provide up to six months, or more in some cases, protection from the growth of algae, sea grass, and a wide variety of worms, corals and barnacles.Features: Formulated for underwater application Naturally sheds most marine growth Performs best in waters of 64°F (18°C) and warmer Flow efficient Long lasting

Read more less

KeelGuard® - 9' - AlmondThe Original Do-It-Yourself Keel Protector - Protect Your Investment Against Sand, Rocks & RampsWear and damage to your boat’s keel can break down its protective gelcoat finish, allowing water to reach and destroy the fiberglass laminates. Megaware KeelGuard®, the powerful abrasion-resistant protector, prolongs the life of your boat like nothing else.Megaware KeelGuard® EngineeringEvery aspect of the patented Megaware KeelGuard® has been designed with boat designers and 3M® engineers. Many factors contribute to its success. A precise, abrasive-resistant blend of polymers and urethanes achieve optimal durability and pliability. A pressure-sensitive adhesive creates strength, while permanently bonding and sealing Megaware KeelGuard®’s contoured edges to the hull surface. Angled grooves produce hydrodynamic channels, creating air pockets and providing a slicker surface. The perfect combination of these factors makes the Megaware KeelGuard® the easiest keel protector to install, and gives it unparalleled quality and dependability.Megaware KeelGuard® Colors & SizesMegaware KeelGuard® comes in 11 great looking colors to match virtually any boat. All colors are UV-stabilized for true color that lasts a lifetime. Megaware KeelGuard® is available in nine standard lengths or can be ordered in custom lengths.Lifetime WarrantyMegaware guarantees this Megaware KeelGuard® (to the original purchaser), against abrasive wear and adhesion failure during normal use of your boat, for as long as you own your boat.Features: Color: Almond KeelGuard® Size: 9' Boat Size up to 24' 3M® Technology 3M® Acrylic Pressure-Sensitive Adhesive Pliable & Tough Research & Technology Contoured Edge Protect Against Abrasive Sand, Rocks, Concrete Ramps and Oyster Beds Eliminate Costly Repairs Enjoy the Highest Quality and Superior Engineering Increase the Value of Your Boat 5” Width: Contact for Custom Sizes Made in the USA Specifications: Length: 9' Color: Almond Boat Length - Max (Feet): 24' Box Dimensions: 5"H x 9"W x 13"L WT: 5.55 lbs UPC: 672057203095 Brochure (pdf)

Read more less

SkegGuard® 27091 Stainless Steel Replacement Skeg Model Guide  Evinrude - 135-150-175-200 25” or 30” Shaft 2 Stroke 2006-Present 225-250-300 2 Stroke 2002-Present  Johnson - 135-150-175-200 25” or 30” Shaft 2 Stroke 2006-Present 135 25" or 30"Shaft 2000-2006 225-250-300 2 Stroke 2002-Present Inexpensive Solution to a Broken Skeg - Save Hundreds of Dollars on Skeg Repairs & ReplacementMegaware SkegGuard® provides the best of two worlds. It will protect and prevent damage to your motor’s skeg and can also be used to repair and replace an already broken skeg.Protect Your Skeg with the Best ProtectorThe Megaware SkegGuard® is constructed of high quality marine grade 316 stainless steel that incorporates an extra reinforced wear tab across the bottom where the skeg is most vulnerable.This 3mm thickened lower plate will withstand damage or abrasion from hidden rocks and debris or accidental ramp dragging. The Megaware SkegGuard® conforms to your lower unit to insure there is no discernible drag or compromise in performance. A drain hole keeps water from collecting and remaining stagnant.Secured with self-locking hardware, the Megaware SkegGuard® can be installed with common tools in less than 10 minutes. It will provide years of service and save hundreds of dollars in potential repairs.If replacing an already broken skeg, the Megaware SkegGuard® can be installed on a lower unit with as little as 2 inches of skeg remaining. It will be stronger and much more affordable than welding and replacing a lower skeg.Megaware SkegGuard® is available in models to fit virtually any skeg.WarrantyMegaware guarantees your Megaware SkegGuard® for a period of three years from the date of purchase. Please retain receipt for proof of purchase date.Features:  Johnson 135-150-175-200 25” or 30” Shaft 2 Stroke 2006-Present 135 25" or 30"Shaft 2000-2006 225-250-300 2 Stroke 2002-Present  Evinrude 135-150-175-200 25” or 30” Shaft 2 Stroke 2006-Present 225-250-300 2 Stroke 2002-Present Mirror Polished Marine Grade 316 Stainless Steel Thickened Lower Wear Tab Protects Against Ramp Dragging and is Great for River Running Drain Hole Prevents Corrosion and Freezing Won’t Compromise Performance Do-It-Yourself Install in Less than 10 Minutes Installs with as Little as 2-3 Inches of Skeg Remaining Specifications: Color: Stainless Box Dimensions: 1"H x 8"W x 18"L WT: 1.9 lbs UPC: 672057270912 Brochure (pdf)

Read more less

KeelGuard® - 6' - BlackThe Original Do-It-Yourself Keel Protector - Protect Your Investment Against Sand, Rocks & RampsWear and damage to your boat’s keel can break down its protective gelcoat finish, allowing water to reach and destroy the fiberglass laminates. Megaware KeelGuard®, the powerful abrasion-resistant protector, prolongs the life of your boat like nothing else.Megaware KeelGuard® EngineeringEvery aspect of the patented Megaware KeelGuard® has been designed with boat designers and 3M® engineers. Many factors contribute to its success. A precise, abrasive-resistant blend of polymers and urethanes achieve optimal durability and pliability. A pressure-sensitive adhesive creates strength, while permanently bonding and sealing Megaware KeelGuard®’s contoured edges to the hull surface. Angled grooves produce hydrodynamic channels, creating air pockets and providing a slicker surface. The perfect combination of these factors makes the Megaware KeelGuard® the easiest keel protector to install, and gives it unparalleled quality and dependability.Megaware KeelGuard® Colors & SizesMegaware KeelGuard® comes in 11 great looking colors to match virtually any boat. All colors are UV-stabilized for true color that lasts a lifetime. Megaware KeelGuard® is available in nine standard lengths or can be ordered in custom lengths.Lifetime WarrantyMegaware guarantees this Megaware KeelGuard® (to the original purchaser), against abrasive wear and adhesion failure during normal use of your boat, for as long as you own your boat.Features: Color: Black KeelGuard® Size: 6' Boat Size up to 18' 3M® Technology 3M® Acrylic Pressure-Sensitive Adhesive Pliable & Tough Research & Technology Contoured Edge Protect Against Abrasive Sand, Rocks, Concrete Ramps and Oyster Beds Eliminate Costly Repairs Enjoy the Highest Quality and Superior Engineering Increase the Value of Your Boat 5” Width: Contact for Custom Sizes Made in the USA Specifications: Length: 6' Color: Black Boat Length - Max (Feet): 18' Box Dimensions: 6"H x 8"W x 8"L WT: 3 lbs UPC: 672057202067 Brochure (pdf)

Read more less

ScuffBuster™ XL with Notch - 9" x 8.75" - Notched - 22G - Stainless SteelProtect Your Boat from Trailer Rollers - Enhance Your Boat's Appearance & Prevent Unsightly MarringThe Megaware ScuffBuster™ protects your boat from unsightly marring. Made from anti-corrosive, 22-gauge 304 stainless steel, Megaware ScuffBuster™ products attach to your boat’s surface with the highest quality materials and 3M® pressure-sensitive adhesives.WarrantyMegaware guarantees your Megaware ScuffBuster™ for a period of one year from the date of purchase. Please retain receipt for proof of purchase date.Features: Protect Your Boat's Gelcoat Minimize Roller and Trailer Scuffs Bend to Conform to Hull Mirror Polished Finish Specifications: Color: Stainless Box Dimensions: 1"H x 11"W x 11"L WT: 0.7 lbs UPC: 672057806388 Brochure (pdf)

Read more less

KeelGuard® - 4' - RedThe Original Do-It-Yourself Keel Protector - Protect Your Investment Against Sand, Rocks & RampsWear and damage to your boat’s keel can break down its protective gelcoat finish, allowing water to reach and destroy the fiberglass laminates. Megaware KeelGuard®, the powerful abrasion-resistant protector, prolongs the life of your boat like nothing else.Megaware KeelGuard® EngineeringEvery aspect of the Megaware KeelGuard® has been designed with boat designers and 3M® engineers. Many factors contribute to its success. A precise, abrasive-resistant blend of polymers and urethanes achieve optimal durability and pliability. A pressure-sensitive adhesive creates strength, while permanently bonding and sealing Megaware KeelGuard®’s contoured edges to the hull surface. Angled grooves produce hydrodynamic channels, creating air pockets and providing a slicker surface. The perfect combination of these factors makes the Megaware KeelGuard® the easiest keel protector to install, and gives it unparalleled quality and dependability.Megaware KeelGuard® Colors & SizesMegaware KeelGuard® comes in 11 great looking colors to match virtually any boat. All colors are UV-stabilized for true color that lasts a lifetime. Megaware KeelGuard® is available in nine standard lengths or can be ordered in custom lengths.Lifetime WarrantyMegaware guarantees this Megaware KeelGuard® (to the original purchaser), against abrasive wear and adhesion failure during normal use of your boat, for as long as you own your boat.Features: Color: Red KeelGuard® Size: 4' Boat Size up to 14' 3M® Technology 3M® Acrylic Pressure-Sensitive Adhesive Pliable & Tough Research & Technology Contoured Edge Protect Against Abrasive Sand, Rocks, Concrete Ramps and Oyster Beds Eliminate Costly Repairs Enjoy the Highest Quality and Superior Engineering Increase the Value of Your Boat 5” Width: Contact for Custom Sizes Made in the USA Specifications: Length: 4' Color: Red Boat Length - Max (Feet): 14' Box Dimensions: 4"H x 9"W x 12"L WT: 1 lbs UPC: 672057208045 Brochure (pdf)

Read more less

Transom Support Plate Upper MountTransom Support Plate distributes stress of engine bolts. Cast in high quality aluminum. All plates are 3/8" thick. Fit top bolt pattern of outboard. Generic plate with no lettering is standard, but custom logos and black painting can be produced with minimum quantities. Features: Distributes stress of engine bolts High quality cast aluminum All plates - 3/8" thick Simple to install

Read more less

KeelGuard® - 7' - Hunter GreenThe Original Do-It-Yourself Keel Protector - Protect Your Investment Against Sand, Rocks & RampsWear and damage to your boat’s keel can break down its protective gelcoat finish, allowing water to reach and destroy the fiberglass laminates. Megaware KeelGuard®, the powerful abrasion-resistant protector, prolongs the life of your boat like nothing else.Megaware KeelGuard® EngineeringEvery aspect of the Megaware KeelGuard® has been designed with boat designers and 3M® engineers. Many factors contribute to its success. A precise, abrasive-resistant blend of polymers and urethanes achieve optimal durability and pliability. A pressure-sensitive adhesive creates strength, while permanently bonding and sealing Megaware KeelGuard®’s contoured edges to the hull surface. Angled grooves produce hydrodynamic channels, creating air pockets and providing a slicker surface. The perfect combination of these factors makes the Megaware KeelGuard® the easiest keel protector to install, and gives it unparalleled quality and dependability.Megaware KeelGuard® Colors & SizesMegaware KeelGuard® comes in 11 great looking colors to match virtually any boat. All colors are UV-stabilized for true color that lasts a lifetime. Megaware KeelGuard® is available in nine standard lengths or can be ordered in custom lengths.Lifetime WarrantyMegaware guarantees this Megaware KeelGuard® (to the original purchaser), against abrasive wear and adhesion failure during normal use of your boat, for as long as you own your boat.Features: Color: Hunter Green KeelGuard® Size: 7' Boat Size up to 20' 3M® Technology 3M® Acrylic Pressure-Sensitive Adhesive Pliable & Tough Research & Technology Contoured Edge Protect Against Abrasive Sand, Rocks, Concrete Ramps and Oyster Beds Eliminate Costly Repairs Enjoy the Highest Quality and Superior Engineering Increase the Value of Your Boat 5” Width: Contact for Custom Sizes Made in the USA Specifications: Length: 7' Color: Green Boat Length - Max (Feet): 20' Box Dimensions: 5"H x 9"W x 13"L WT: 4.6 lbs UPC: 672057214077

Read more less