Boat Outfitting - Propeller

Turning Point Hub Kit: 11Features Lifetime Warranty Never buy another hub kit system again Inner splines adapt to the engine Outer hub compatible with different props Reduce gear shock & engine/drive damage Save up to 30% when purchasing a replacement prop Eliminate propeller vibration & chatter Eliminate hub cracking & failure Corrosion resistant materials - brass splines Reduce gear shock & engine/drive damageWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)Brochure (pdf)

Read more less

Activator - 60mlPart of a two-component 4:1 etching primer. Once mixed with the PropOne Primer Coat, the Primer chemically dries to protect metallic surfaces against corrosion and allow adhesion of the PropOne Clear Coat. Suitable for ferrous & non-ferrous metals.NOTE: This product is the PropOne Primer Activator only. Other components are sold separately.PropOne is a non-toxic foul-release coating that prevents sea life from adhering to propellers and underwater running gear.  It is used on thousands of boats worldwide every year, with a proven track record of over 8 years. Non-stick, super slick coating that lasts 1-2 years in water! It works, it’s the one. No.1 Foul release coating for propellers and running gear. Proven season after season to keep your propellers and running gear clean. PropOne is used on many thousands of boats worldwide every year, with a proven track record of over 8 years.

Read more less

Clear Coat - 400mlPropOne Clear Coat is part of the PropOne System. The Clear Coat is a non-biocidal, low surface energy coating which prevents organisms from strongly adhering to the surface of the propeller and running gear components permanently immersed in water. The Clear Coat does not prevent marine growth by leaching biocides into the environment.NOTE: This product is the PropOne Clear Coat only. Other components are sold separately.PropOne is a non-toxic foul-release coating that prevents sea life from adhering to propellers and underwater running gear.  It is used on thousands of boats worldwide every year, with a proven track record of over 8 years. Non-stick, super slick coating that lasts 1-2 years in water! It works, it’s the one. No.1 Foul release coating for propellers and running gear. Proven season after season to keep your propellers and running gear clean. PropOne is used on many thousands of boats worldwide every year, with a proven track record of over 8 years.

Read more less

Primer - 240mlPart of a two-component 4:1 etching primer. Once mixed with the PropOne Activator, the Primer chemically dries to protect metallic surfaces against corrosion and allow adhesion of the PropOne Clear Coat. Suitable for ferrous & non-ferrous metals.NOTE: This product is the PropOne Primer only. Other components are sold separately.PropOne is a non-toxic foul-release coating that prevents sea life from adhering to propellers and underwater running gear.  It is used on thousands of boats worldwide every year, with a proven track record of over 8 years. Non-stick, super slick coating that lasts 1-2 years in water! It works, it’s the one. No.1 Foul release coating for propellers and running gear. Proven season after season to keep your propellers and running gear clean. PropOne is used on many thousands of boats worldwide every year, with a proven track record of over 8 years.

Read more less

Paint Stripper - 200mlRemove old PropOne coatings from your propellers and running gear with ease using PropOne Paint Stripper and Silicone Remover.Features: Easy application – Brush on and it will do the rest! Reduce dust and noise – Easy removal Effectively allows multiple stubborn layers to be removed Marine Grade: DCM & NMP free* PropOne Silicone Remover is designed to remove PropOne Clear Coat. It can also be used as a general-purpose silicone remover to remove thin coatings.PropOne Paint Stripper will remove paints, varnishes, and lacquers. It is primarily to be used with PropOne Silicone Remover for the removal of PropOne Primer Coat.Do not use on plastic surfaces or resin-impregnated wood fibreboard materials.For plastics and other delicate surfaces, test a small area first to ensure Silicone Remover & Paint Stripper does not affect the underlying substrate.Application: Apply Paint Stripper approximately 2mm thick using a brush or roller Leave  in contact for at least 15 minutes or until softened Scrape off the coating with slight pressure and appropriately dispose of waste. A wire brush, strong scourer, or paint scraping tool is recommended. If any coating remains after scraping, apply a second coat. Wipe off any remaining residue with an acetone-soaked cloth, then hose down the surface to leave a bright metal surface. *Does not contain toxic Dichloromethane and N-Methylpyrrolldone

Read more less

Silicone Remover - 200mlRemove old PropOne coatings from your propellers and running gear with ease using PropOne Paint Stripper and Silicone Remover.Features: Easy application – Brush on and it will do the rest! Reduce dust and noise – Easy removal Effectively allows multiple stubborn layers to be removed Marine Grade: DCM & NMP free* PropOne Silicone Remover is designed to remove PropOne Clear Coat. It can also be used as a general-purpose silicone remover to remove thin coatings.PropOne Paint Stripper will remove paints, varnishes, and lacquers. It is primarily to be used with PropOne Silicone Remover for the removal of PropOne Primer Coat.Do not use on plastic surfaces or resin-impregnated wood fibreboard materials.For plastics and other delicate surfaces, test a small area first to ensure Silicone Remover & Paint Stripper does not affect the underlying substrate.Application: Remove all marine growth from the surface. Apply Silicone Remover approximately. 2mm thick using a brush. Tip: Prevent drying out by covering the treated area with cling wrap in hot/windy climates. Do not allow the remover to come in contact with water.  Leave in contact for 2-3 hours or until softened. Remove with a stiff nylon or wire brush, scrubbing in a circular motion. Wipe off any remaining residue with a xylene or toluene-soaked cloth. If any coating remains after scraping, apply a second coat. Once done, proceed with Paint Stripper *Does not contain toxic Dichloromethane and N-Methylpyrrolldone

Read more less

Hub Kit #13Features: Lifetime Warranty Never buy another hub kit system again Inner splines adapt to the engine Outer hub compatible with different props Reduce gear shock & engine/drive damage Save up to 30% when purchasing a replacement prop Eliminate propeller vibration & chatter Eliminate hub cracking & failure Corrosion resistant materials - brass splines Reduce gear shock & engine/drive damage WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)Brochure (pdf)

Read more less

Express® Mach3™ - Right Hand - Stainless Steel Propeller - E1-1013 - 3-Blade - 10.5" x 13 PitchTurning Point has built their reputation on a relentless focus on engineering the best performing stainless steel propellers in the World. Super stiff metallurgy, unique blade geometry, aggressive pitch, rake, and cup all give you the best they can offer. Not only does top speed, handling and hole shot improve, but also mid-range performance, which will save you a ton in gas usage. If you want the most your boat and engine combination can offer, then the Express Mach3 3 Blade delivers.The Three Blade Express is great for boaters looking to get the most top end out of their boat, and offer excellent bow lifting capabilities. These props are perfectly matched to mid-range horsepower pontoons, fishing, ribs, and tiller boats. It will fit all 6-75hp outboards with 2.5", 3", and 3.5" gearcases from all engine manufacturers.Proprietary Stainless Steel, TP17™Formulated to meet the exacting requirements of the New Express Mach3 and Mach4 designs. 20% higher chromium content than the competition - more shine, better corrosion resistance. Almost 250% Stronger and 5X more durable than run-of-the-mill stainless steel. This new material allows Turning Point's Engineers and Designers the freedom to produce radical new designs that will help you wring the most performance out of your boat.Large Free Flowing Exhaust PortsTurning Point's Propeller Housings have massive Exhaust flow pathways. Their Propellers have 40% more exhaust flow Area versus competitive product. More exhaust flow and less backpressure can generate more horsepower. Like headers for your boat.Turning Point manufactures Express propellers to fit 9.9(bigfoot)-300+hp Evinrude®, Force®, Honda®, Johnson®, Mariner®, Mercruiser®, Mercury®, Nissan®, OMC®, Parsun®, Suzuki®, Tohatsu®, Volvo® Penta®, and Yamaha® Outboards and Sterndrives. Choose one of our Lifetime Warranty MasterGuard Installation Kits to fit your engine, then choose the propeller that matches your boating requirements. There are 3 and 4 blade, left and right rotation prop models with a variety of diameter and pitch options available for almost all boat types. Turning Point's Props Run Faster, Pull Harder, and Handle Better.Note: A Hub Kit is required for installation of this propeller. See the Turning Point Selection Chart or the Prop Wizard™ for hub kit selection.WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Rotation: Right Diameter (Inches): 10-1/2" Material: Stainless Steel Pitch: 13 Box Dimensions: 6"H x 13"W x 14"L WT: 7.7 lbs UPC: 652480200922 Quick Guide (pdf)Brochure (pdf)

Read more less

Turning Point Hub Kit: 21Features Lifetime Warranty Never buy another hub kit system again Inner splines adapt to the engine Outer hub compatible with different props Reduce gear shock & engine/drive damage Save up to 30% when purchasing a replacement prop Eliminate propeller vibration & chatter Eliminate hub cracking & failure Corrosion resistant materials - brass splines Reduce gear shock & engine/drive damageWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)Brochure (pdf)

Read more less

Express® Mach3™ - Right Hand - Stainless Steel Propeller - E1-1014 - 3-Blade - 10.38" x 14 PitchTurning Point has built their reputation on a relentless focus on engineering the best performing stainless steel propellers in the World. Super stiff metallurgy, unique blade geometry, aggressive pitch, rake, and cup all give you the best they can offer. Not only does top speed, handling and hole shot improve, but also mid-range performance, which will save you a ton in gas usage. If you want the most your boat and engine combination can offer, then the Express Mach3 3 Blade delivers.The Three Blade Express is great for boaters looking to get the most top end out of their boat, and offer excellent bow lifting capabilities. These props are perfectly matched to mid-range horsepower pontoons, fishing, ribs, and tiller boats. It will fit all 6-75hp outboards with 2.5", 3", and 3.5" gearcases from all engine manufacturers.Proprietary Stainless Steel, TP17™Formulated to meet the exacting requirements of the New Express Mach3 and Mach4 designs. 20% higher chromium content than the competition - more shine, better corrosion resistance. Almost 250% Stronger and 5X more durable than run-of-the-mill stainless steel. This new material allows Turning Point's Engineers and Designers the freedom to produce radical new designs that will help you wring the most performance out of your boat.Large Free Flowing Exhaust PortsTurning Point's Propeller Housings have massive Exhaust flow pathways. Their Propellers have 40% more exhaust flow Area versus competitive product. More exhaust flow and less backpressure can generate more horsepower. Like headers for your boat.Turning Point manufactures Express propellers to fit 9.9(bigfoot)-300+hp Evinrude®, Force®, Honda®, Johnson®, Mariner®, Mercruiser®, Mercury®, Nissan®, OMC®, Parsun®, Suzuki®, Tohatsu®, Volvo® Penta®, and Yamaha® Outboards and Sterndrives. Choose one of our Lifetime Warranty MasterGuard Installation Kits to fit your engine, then choose the propeller that matches your boating requirements. There are 3 and 4 blade, left and right rotation prop models with a variety of diameter and pitch options available for almost all boat types. Turning Point's Props Run Faster, Pull Harder, and Handle Better.Note: A Hub Kit is required for installation of this propeller. See the Turning Point Selection Chart or the Prop Wizard™ for hub kit selection.WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Rotation: Right Diameter (Inches): 10-3/8" Material: Stainless Steel Pitch: 14 Box Dimensions: 7"H x 12"W x 12"L WT: 8.2 lbs UPC: 652480200939 Quick Guide (pdf)Brochure (pdf)

Read more less

Hustler® - Right Hand - Aluminum Propeller - H1-1011 - 3-Blade - 10.875" x 11 PitchTurning Point has built their reputation on a relentless focus on engineering the best performing aluminum propellers in the World. Utilizing state-of-the-art Squeeze Casting technology, they produce Hustler 3 Blade Propellers that run as fast as their competitors' Stainless Steel Props, and even sometimes faster! Super stiff metallurgy, unique blade geometry, aggressive pitch, rake, and cup all give you the best they can offer: Stainless Performance at Aluminum Prices! Not only does top speed, handling and hole shot improve, but also mid-range performance, which will save you a ton in gas usage. If you want the most your boat and engine combination can offer, then the Hustler 3 Blade delivers.The Three Blade Hustler is great for boaters looking to get the most top end out of their boat, and offer excellent bow lifting capabilities. These props are perfectly matched to mid-range horsepower pontoons, fishing, ribs, and tiller boats. It will fit all 6-75hp outboards with 2.5", 3", and 3.5" gearcases from all engine manufacturers.Squeeze Cast for Added StrengthStainless steel performance is built into the Hustler Aluminum prop line. This is achieved through unique blade geometry and an exclusive Turning Point manufacturing process, Squeeze Casting. This process generates the highest mechanical properties attainable in a cast aluminum prop resulting from high density tighter grain structure. Stiffer blades means less flex and a faster prop. Competitors' Aluminum propellers are manufactured utilizing old Die-Cast process that produces props with air bubble, voids, and granularity. Weak, lack of strength and stiffness. Difficult to repair. Blades Flex under load, inefficient, loss of propulsive efficiency.Long Lasting Ultracoat™ Powder Coated FinishExclusive to Turning Point, the Ultracoat powder coat rivals a fine automotive finish, and is more durable than paint. Utilizing a state-of-the-art five step process, Ultracoat gives the propeller a shiny, uniform appearance that enhances any boat's good looks. This is the Gold Standard in Aluminum Corrosion Protection. Prop looks Newer Longer! Compared to Competitors' 4 step Paint and Coating Processes that result in much less abrasion and corrosion resistance.Large Free Flowing Exhaust PortsTurning Point's Propeller Housings have massive Exhaust flow pathways. Their Propellers have 40% more exhaust flow Area versus competive product. More exhaust flow and less backpressure can generate more horsepower. Like headers for your boat.Turning Point manufactures Hustler propellers to fit 6-300+hp Evinrude®, Force®, Honda®, Johnson®, Mariner®, Mercruiser®, Mercury®, Nissan®, OMC®, Parsun®, Suzuki®, Tohatsu®, Volvo® Penta®, and Yamaha® Outboards and Sterndrives. Choose one of our Lifetime Warranty MasterGuard Installation Kits to fit your engine, then choose the propeller that matches your boating requirements. There are 3 and 4 blade, left and right rotation prop models with a variety of diameter and pitch options available for almost all boat types. Turning Point's Props Run Faster, Pull Harder, and Handle Better.Note: A Hub Kit is required for installation of this propeller. See the Turning Point Selection Chart or the Prop Wizard™ for hub kit selection.  WARNING: This product can expose you to chemicals including CARBON BLACK which is known to the State of California to cause cancer, and LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Diameter (Inches): 10-7/8" Material: Aluminum Pitch: 11 Rotation: Right Box Dimensions: 6"H x 13"W x 13"L WT: 3.95 lbs UPC: 652480100727 Quick Guide (pdf)Brochure (pdf)

Read more less

Express® Mach3™ - Right Hand - Stainless Steel Propeller - EX3-1011 - 3-Blade - 10.5" x 11 PitchTurning Point has built their reputation on a relentless focus on engineering the best performing stainless steel propellers in the World. Super stiff metallurgy, unique blade geometry, aggressive pitch, rake, and cup all give you the best they can offer. Not only does top speed, handling and hole shot improve, but also mid-range performance, which will save you a ton in gas usage. If you want the most your boat and engine combination can offer, then the Express Mach3 3 Blade delivers.The Three Blade Express is great for boaters looking to get the most top end out of their boat, and offer excellent bow lifting capabilities. These props are perfectly matched to mid-range horsepower pontoons, fishing, ribs, and tiller boats. It will fit all 6-75hp outboards with 2.5", 3", and 3.5" gearcases from all engine manufacturers.Note: A Hub Kit is required for installation of this propeller. See the Turning Point Selection Chart or the Prop Wizard™ for hub kit selection.WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Diameter (Inches): 10-1/2" Material: Stainless Steel Pitch: 11 Rotation: Right Box Dimensions: 6"H x 11"W x 12"L WT: 7.3 lbs UPC: 652480206610 Quick Guide (pdf)Brochure (pdf)

Read more less