Boat Outfitting - Security Systems

Siren Marine Audible AlarmThe Siren Marine audible alarm produces a powerful beeping sound (105 decibels). The alarm can be connected to one of the outputs on the MTC, which will allow it to be turned on and off from the "switching" section of the Siren Marine App. It can also be mapped to specific inputs (such as a motion sensor) in the app and programmed to turn on automatically.Features: Automatically adjusts to a supply voltage range of 12-80V Waterproof housing with epoxy embedded electronics Wiring is required to any 12V-80V DC power source Easy-to-install universal mounting bracket with slotted holes Works with MTC and Siren 3 Pro Specifications: Material: Heavy-duty plastic housing Waterproof: Yes Voltage: 12V-80V Power: 10W Current: 0.5A Length: 3.9 in (including bracket) Width: 1.5 in Height: 2.57 in Volume: 105 +/- 3dB

Read more less

PAM4 Wired DC RelayThe Siren Marine DC Accessory Relay allows users to control any 12v onboard devices, such as A/C, deck or spreader lights, sirens, or strobe lights. Dimensions: 1.5x0.75x1.19in (box) 11.3in (wire) Relay may be energized across a wide voltage range from 9VDC to 32VDC. Ideal for 12VDC and 24VDC circuits. 20mA operating current is constant across the operating range. Input voltages are polarity-sensitive and diode-protected. Relay is required to power or switch 12V systems that draw more than 1 Amp via the internal outputs of the MTC. Works with MTC and Siren 3 Pro

Read more less

Nav-Tracker 1.0 Elite with 30' CableGOST Nav-Tracker ELITE IDP was developed to offer a Hardwired marine grade, water resistant, monitoring and tracking system that provides global arm/disarm over satellite from anywhere in the world with the reassurance of a battery backup which will notify you with a 'Monitoring Alert' if your batteries are either cut off completely or if the battery voltage reaches 10.2VDC so it also functions as a battery low voltage sensor for the battery it is connected to. The system can be controlled and monitored remotely, no matter where the vessel is located globally, with the exception of the most extreme polesGOST Satellite NAV-Tracking delivers total peace of mind. The award-winning satellite tracking packages, powered by Inmarsat’s geostationary satellites constellation, provide you with the option to securely monitor your boat from anywhere in the world with 99.99% reliability.Features: Satellite Antenna IDP Push-Button Arming Switch Remote Access & Monitoring Standard 10m/30ft GPS Cable Included (GNT-30) Package Includes: GOST Nav-Tracker 1.0 Elite unit w/ Tamper-proof backup battery GOST Nav-Tracker Antenna 10-meter Antenna Cable 2-meter Power Cable w/ IP67 rated latching Arm/Disarm GNT-L-Bracket to mount the antenna Brochure (pdf)

Read more less

Boat Monitor Package without Bilge SentryKnow your boat is OK when you are away!With Sensar Marine installed, you can check on your boat anytime from your cellphone. Data is continuously uploaded to the cloud and SMS alerts are sent instantly if a problem occurs. The Boat Monitor will run 24/7 /365 - without depleting your boat batteries.Sensar's Monitor Package without Bilge Sentry is a simplified Boat Monitor package, designed specifically for pontoon boats and boaters who do not require bilge water depth measurement.The Sensar Marine Boat Monitor provides around-the-clock protection by delivering continuous “black box” monitoring of your vessel’s location, battery status across two banks, impact detection, and bilge pump functionality. An automatic geofence is established around the boat, sending SMS alerts for any movement, low battery levels, or bilge pump activity.What sets Sensar Marine apart is the Boat Monitor’s maintenance-free design, with no parasitic draw on the boat’s batteries. Waterproof to IPx7 standards and built in Norway, it comes with a five-year warranty and is ready to endure harsh conditions, providing reliable performance in any weather, anywhere in the world.The Boat Monitor can be easily accessed through a user-friendly iOS or Android app, which allows boat owners to view historical data, track trip logs, and monitor key metrics such as speed and g-force. The device also records and displays detailed journey logs on a map. The package (SKU BM700, 3.5” x 5.5” x 6”, 30 oz) comes fully equipped with all the components needed for fast and easy installation, right out of the box.Features: Voltage (12 or 24V) - Your two battery banks will be monitored and you will be warned when they go to critically low levels. It supports lithium too! GeoFence - Notifies you if your boat moves from where you left it. This fully automatic function activates after the boat has been still for over 15 minutes. Triplog - Log all your trips automatically - no need to press record. Detailed data is captured with speed, course, impact, time, and location. GPS Position & Sharing - The integrated GPS antenna gives you real-time information about your boat's position and the ability to quickly send it by text to friends or in case of an emergency. Impact - See if your boat is in rough seas or has experienced an impact. An integrated accelerometer measures G-force. Bilge Pump - Track your pump activity. You'll be alerted anytime the bilge pump operates. Quick Guide (pdf)

Read more less

Remote Cellular & GPS Antenna - Adhesive Mount Puck Enjoy enhanced location and cellular connectivity reception for your Siren 3 Pro all with one combination antenna.The Remote GPS & Cell Antenna Adhesive-Mount Puck is easy to mount and will extend the GPS and cellular range capabilities of your Connected Boat® System, strengthening your connection to your boat for the ultimate peace of mind.Compatible With:Siren 3 ProTechnical Specifications: Cable length - 9.8 ft (3 m) Dimensions (H x Dia.) - 0.5" x 2.5" (12 x 62.8 mm) *Sold as an Individual 

Read more less

Wired Infrared Motion SensorThe Visonic 360 Ceiling Dualtech motion sensor offers robust protection against theft. Simply mount this sensor in a cabin or above the main entryway, and receive notification in the event of unauthorized entry. The sensor can also be programmed to sound an audible alarm. Featuring a sleek, compact, and elegant design, the sensor blends seamlessly into any décor. Visonic technology assures high reliability, false alarm immunity, and 360-degree coverage. Ideal for monitoring unexposed areas such as pilothouse, galley, cabin, etc.Specifications: Dimensions: 3.37in (diameter) 1in (depth) Ceiling Mount Range:  360° detection pattern with floor coverage up to 36ft Supply Voltage: 9-12V Not recommended for use on weather/exposed decks Works with MTC and Siren 3 Pro

Read more less

Shore Power Relay - 240VThe 240VAC Shore Power Relay is used to detect presence and loss of AC shore power. The relay is meant to be hardwired directly to your AC distribution panel. This relay is the hard wired alternative to the Siren Marine Shore Power Sensor Plug for boats with 240VAC systems.Features: Coil Voltage: 240VAC Contact Current: 10A Works with MTC and Siren 3 Pro

Read more less

120V AC Shore Power Relay - WiredThe 120VAC Shore Power Relay is used to detect presence and loss of AC shore power. The relay is meant to be hardwired directly to your AC distribution panel. This relay is the hard wired alternative to the Siren Marine Shore Power Sensor Plug for boats with 120VAC systems.Features: Coil Voltage: 120VAC Contact Current: 10A Quick Guide (pdf)

Read more less

Wired Magnetic REED SwitchMagnetic reed switches are used to report unauthorized entry into a main cabin through a door or external hatch. Reed switches can be connected in series to monitor multiple entry points, providing secure protection against theft. In the event of unauthorized entry, the switches will trigger an entry alert to the boat owner, and can also be configured to sound an audible alarm on the boat.Specifications: Dimensions: 1x1in (2-part body, 0.5x1in each) 12in (wire) Screw mount and adhesive mount included Grounds directly to security input Works with MTC and Siren 3 Pro

Read more less

Boat Monitor with Bilge SentryThe Boat Monitor is the system's brain - where data from the boat is continually collected and sent to the app.The system runs on an internal battery with 40 days of power and charges itself every time a boat's batteries are being charged. In other words, it is completely maintenance-free and will monitor the boat for years without removing it to charge.Features: The boat monitor can monitor up to 2 batteries and bilge pump activity Provides position of boat utilizing all available satellites Geofence which alerts boaters if the boat leaves a specific area (fully automatic function) Visualize the current trip and see the history of previous voyages The unit has an integrated accelerometer that displays G-force (measurement area: 0g to 8g) Cables Made for Maritime UseThe cable set connects directly to up to two battery banks and the bilge pump.Sensar's cables were developed specifically to be able to function in harsh maritime conditions. They will always deliver data back to the boat monitor, regardless of the moisture in the motor room.Keep Track of the Boat at All TimesAutomatic GPS features give users peace of mind.The boat monitor has sensors that track position and movement, which allows the app to show users the current position of the boat at all times.GeoFence and Triplog features will automatically be updated so that boaters always know when the boat is underway, where the boat is, and where it has been.Simple InstallationNo screws, no metal components, no problem.Sensar designed the installation process so boaters can easily do it themselves with the help of a pair of pliers. With the device, users will receive enough industrial tape to mount the entire system in cases where they don't want to use screws in the boat. Additionally, Sensar has chosen plastic components across the system to avoid eventual sources of rust in the boat.In the Box: Boat monitor Battery/bilge pump cable (6 ft.) Bilge Sentry (cable 5 ft.) Mounting bracket Information card (ID and connection code) Quick connection T-splice cable Double-sided tape (4 pcs.) Cleaning wipes (2 pcs.) Specifications: Size (H x W x D): 112.5 x 97 x 35.5 mm Weight: 276.5 grams Internal Battery: 40 days of power (charges automatically when boat batteries charge) Mobile Coverage: 4G Internal Antenna Boat Batteries: Connections for two battery banks, support 12V and 24V batteries, warning voltage: 12.2V, and alarm voltage: 11.8V Bilge Pump: Notifies every time the bilge pump is running Bilge Water Level: Measures between 0 and 6 inches, warning water level: 4 in., and alarm water level: 5.5 in. Bilge Temperature: Measures between -4°F and 140°C, warning temperature: 34°F, and alarm temperature: 28°F GPS: Internal antenna Position Tech: Multi-GNSS-receiver Mounting Bracket: Height: 83 mm, width: 90 mm, and depth: 28 mm Attachment for Bracket and Bilge Sentry: 3M Industrial Tape and 28 mm screws Brochure (pdf)

Read more less

Wireless Smoke DetectorThis product senses small particles in the air using a couple of different kinds of technologies. Once those particles are above a certain threshold, the unit will signal the alarm and begin sending system alert messages via text and email to the users.

Read more less

Infrared Beam Sensor with 33' CableThe Infrared Beam Sensor can be mounted near entry points or in a cabin. These sensors use a true photoelectric beam, not an infrared field of view like our ePIR or Infrared Motion Sensor, which ensures protection against false alarms due to shadows, sunlight, etc.

Read more less