Boat Outfitting - Trolling Motor Accessories

MKP-40 Weedless PropDesigned to deliver optimal power, torque, and efficiency. Designed to work exclusively with QUEST Series motors. Includes prop pin, nut, and washer.Features: Power Prop, made exclusively for QUEST Series motors, is designed for maximum torque and efficiency Designed to deliver optimal power, torque, and efficiency Fits 4-1/2" QUEST Series lower units For use with a 1" x  3/16" Prop/Drive Pin Prop nut thread 3/8" - 24

Read more less

MKA-64 Quick Release BracketEasily remove your electric steer and bow-mount trolling motor. High-yield composite construction is super strong, impervious to corrosion, and specifically designed for higher thrust motors and longer shaft lengths. The low-profile design leaves the deck clear when the motor is removed. A locking handle with stainless steel pins can be secured with a padlock (padlock not included; sold separately). NOTE: Recommended for 112 lb. thrust and 72" shaft trolling motors.Features: Designed to meet the increased stress created by high-thrust motors and long shaft lengths Allows bow-mount trolling motors to be quickly mounted and/or removed from the boat deck The low-profile design attaches the trolling motor to the top bracket and drops in over the deck-mounted puck Constructed of marine grade composite, powder-coated and anodized aluminum, and stainless steel to resist rust, corrosion, and discoloration The locking handle can be secured with a padlock (not included) for additional security Designed for use in freshwater

Read more less

MKA-27 60AMP Circuit BreakerFeatures: 60AMP Circuit Breaker Waterproof Ignition Protected

Read more less

i-PILOT LINK REMOTE HOLDING CRADLE - BLUETOOTHSecure i-Pilot Link remote to your belt or console with this versatile cradle. Use the belt clip for constant easy access, or remove the belt clip and mount i-Pilot Link cradle to your dash for simple, straightforward operation.Compatible only with Bluetooth-enabled i-Pilot Link remotes.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Force® Kraken LiveScope™ Mounting BracketUse this bracket to mount your compatible LiveScope transducer to your Force Kraken trolling motor by running the cable through the shaft of the motor.

Read more less

Force™ Trolling Motor SkegProtect your motor and blade from impact by placing a standard skeg on your Force™ trolling motor. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)

Read more less

Ultrex Lift Assist Cylinder for 80/112LBS Motors with 52” Shaft LengthThese replacement lift assist cylinders for Ultrex trolling motors work by increasing the effective weight of the overall lift assist system to account for the added weight of aftermarket Humminbird transducers being added to the shaft of these motors. Compatible only with both Mega 360 and Mega LIVE TargetLock, these replacement cylinders restore the original effect of the lift assist bracket in their associated motors.Features: Increases effect of lift-assist for motors equipped with both Humminbird® MEGA Live Imaging TargetLock™ and Humminbird® MEGA 360 Imaging™ reduces the effort required for motor stow and deploy replaces the factory standard lift assist cylinder Designed for 24V, 80lb or 36V, 112lb Ultrex™ motors with a shaft length of 52”

Read more less

Small Offset Trolling Motor Plate for Garmin’s KrakenThe Sea Brackets Small Offset Trolling Motor Mounting Plate, designed for the Garmin Quick Release Plate System, offers a robust and reliable solution for installing any Force Kraken Trolling motor. Crafted from 6061 T6 aluminum, each plate is primed, powder-coated, and UV-protected for exceptional durability against the elements. Whether for port or starboard installation, these plates boast clean, accurately gauged holes for seamless bolt engagement.Suggested Hardware: 316L stainless steel hardware is recommended for rust prevention Mounting hardware is included with Garmin's Quick Release Plate System Backing disk from Sea Brackets or an alternative backing support system 1/4–20 flat-head Phillips machine screws, fender washers, and lock nuts 5/16–18 Flat-head Phillips machine screws, fender washers, and lock nuts Dimensions:18.5" x 13.5" x 1/2"Note: Hardware length is dependent on the thickness of the hull, backing hardware, and other various components.

Read more less

Large Offset Trolling Motor Plate for Garmin’s KrakenThe Sea Brackets Large Offset Trolling Motor Mounting Plate, designed for the Garmin Quick Release Plate System, offers a robust and reliable solution for installing any Force Kraken Trolling motor. Crafted from 6061 T6 aluminum, each plate is primed, powder-coated, and UV-protected for exceptional durability against the elements. Whether for port or starboard installation, these plates boast clean, accurately gauged holes for seamless bolt engagement.Suggested Hardware: 316L stainless steel hardware is recommended for rust prevention Mounting hardware is included with Garmin's Quick Release Plate System Backing disk from Sea Brackets or an alternative backing support system 1/4–20 flat-head Phillips machine screws, fender washers, and lock nuts 5/16–18 Flat-head Phillips machine screws, fender washers, and lock nuts Dimensions:18.5" x 15.5" x 1/2"Note: Hardware length is dependent on the thickness of the hull, backing hardware, and other various components.

Read more less

MKR-30 Remote Power SwitchAllows for power on/off functionality of Minn Kota Quest series RT Instinct, Ulterra, RT Terrova and Terrova trolling motors via remote mounted rocker switch.Features: Allows for power on/off functionality of select motors via remote mounted rocker switch Interchangeable white and black switch covers included for all mounting applications Dimmable LED backlight indicates switch position Can be used with or without optional wired foot pedal accessory via y-cable connection 30 ft. lead length Compatible with QUEST series Ulterra, Terrova, Riptide Terrova, and Riptide Instinct motors Specifications:Warranty: One-Year Warranty Quick Guide (pdf)

Read more less

RT Instinct/Ulterra Quest Corded Foot PedalDual mode operation controls AutoStow/Deploy and Power Trim as well as steering, speed, prop on/off, Spot-Lock, and a One-Boat Network programable button. Includes an 18' cord with a waterproof connector.Features: One-Boat Network programable button with LED indicator Low-profile, waterproof design Heel/toe pedal and left/right steering options Spot-Lock ON/OFF button with LED indicator Momentary/Constant ON button with LED indicator Rotary speed control dial 18' cable with waterproof connector plug Works in conjunction with the Advanced GPS Navigation Remote Control and Remote Power Switch / MKA-30 Compatible with the QUEST series, RT Instinct, and Ulterra

Read more less

Deck Mount Stabilizer KitUse this to stabilize your Force® Kraken Trolling motor when in the stowed position.

Read more less