Boat Outfitting

Aquazorber™ Drying MopThe Aquazorber™ Drying Mop is a top-of-the-line drying mop made from imported material featuring 2" wide die-cut strips for maximum absorbency. Aquazorber mops are designed for drying decks and painted and fiberglass surfaces quickly and easily. Material is not affected by mold, mildew, cleaning chemicals, or fuel. Aquazorber mops are stored in their reusable tube so your mop is ready to dry when you need it. A protective end cap prevents damage to decks, paint, and fiberglass. Aquazorber Mops are recommended for drying, not cleaning or scrubbing, especially on non-skid surfaces. Specifications: Type: Tools & Accessories Box Dimensions: 3"H x 3"W x 22"L WT: 0.85 lbs UPC: 633590313153

Read more less

G-Force ELIMINATOR Red Prop Nut for Garmin Force Trolling MotorOne of the latest products in the G-Force lineup is the ELIMINATOR Prop Nut. The ELIMINATOR Prop Nut is built to make your trolling motor perform better, longer, and quieter. Designed to lessen prop noise and vibration, The ELIMINATOR Prop Nut stabilizes the prop by providing a larger contact point. In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for a longer battery and trolling motor life. Made to fit Garmin Force trolling motors. This specific part comes in red color to provide a sleek, matching aesthetic. Factory nut and washer will have to be removed prior to installing Eliminator, also if you have an anode it will have to be removed as well to use the Eliminator.Make sure that you're getting the most out of your trolling motor with the ELIMINATOR Prop Nut.Key ELIMINATOR Benefits: Machined from 6061 Billet Aluminum O-ring dampens noise/vibration and secures the nut Wider contact area for a more stable prop Cooling ports aid in heat dissipation Anodized protected No tools needed Available in popular colors Visually appealing Designed and made in the U.S.A. Patent pending

Read more less

ATLAS™ 6" Set Back Hydraulic Jack Plate - Heavy DutyT-H Marine’s ATLAS™ Hydraulic Jack Plate is now available in a “HEAVY DUTY” upgrade.T-H Marine’s ATLAS™ Hydraulic Jack Plate is the #1 selling jack plate in the world and the #1 Choice by fishing professionals and boat manufacturers. With the new ATLAS™ HEAVY DUTY, the product is available for applications on even larger outboards, rated for engines up to 400 hp. 5 REASONS YOU SHOULD CHOOSE THE ATLAS™ HYDRAULIC JACK PLATE ATLAS™ is truly the best hydraulic jack plate in the world ATLAS™ is factory installed by more boat manufacturers than any other plate ATLAS™ is used by more professional fisherman than any other hydraulic jack plate ATLAS™ is the #1 selling hydraulic plate in the world – sold & serviced by more outlets ATLAS™ hydraulic actuator is made in the U.S.A. vs. our competitors being from China 6 WAYS THE ATLAS™ CHANGED HYDRAULIC JACK PLATES FOREVER ATLAS™ is made by T-H Marine/CMC, who were the FIRST to offer an actuator inside the jack plate – the competition copied ATLAS™ was the first plate to offer predrilling for shallow water anchors – the competition copied ATLAS™ was the first and only plate that did not require regular grease lubrication – the competition design cannot do that ATLAS™ was the first plate to include a heavy duty safety cable to protect boaters from engine entering cockpit upon failure ATLAS™ was the first plate to offer a very simple actuator replacement in the field ATLAS™ was the first major development in hydraulic jack plates in over a decade – spurring hydraulic jack plate improvement WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Prop Master Propeller WrenchThe Prop Master™ is the original molded propeller wrench.This 1-1/16" six point socket style prop wrench is made of high tensile strength, indestructible nylon. It is totally resistant to fuel, sun, salt water, and other chemicals. The Prop Master™ is less expensive than metal wrenches which rattle and can cause damage to your boat. However, it has plenty of brawn to get the job done. The Prop Master™ will tighten all 1 1/16" propeller nuts without slipping or stripping. (OMC, Johnson and Evinrude, - over 40 HP, Mercury - over 50 HP) High visibility color makes it easy to locate in dark boat compartments. The Prop Master™ also has a 9/16" garboard drain plug socket on the reverse side. Will not corrode in the salt water environment.Features: Fits All 1-1/16” Prop Nuts (40hp & up) Rugged Nylon Resists Stripping 9/16” Garboard Drain Socket on Back Non-Corrosive in Salt Environment High Visibility Yellow makes wrench easy to find WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Pitch: N/A Material: Polymer Diameter (Inches): 0.6875 Box Dimensions: 2"H x 6"W x 16"L WT: 0.6 lbs UPC: 733572020007

Read more less

ATLAS™ Hydraulic Gauge Kit for 6", 10", 12" & 14" ATLAS™ Jack Plate - Black BezelDigital LED Position Gauge for Atlas™ Hydraulic Jack Plates Features: All Digital Readout Black Face and Stainless Steel Face Gauges Available Outer Bezel available in Stainless Steel or Black Polymer Each Number Indicates 1/4” Rise Numbered from 0 to 20 All ATLAS™ Jacks are pre-drilled to Fit See pictures to the right to view both styles WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Quick Flush Kit for OMC OutboardsProvides a quick and easy way to flush any outboard equipped with a flushing port. No more removing the plug and twisting the hoses to flush. Replace the plug with the Quick Flush™ and snap the hose on and off. Normal operating water pressure keeps the valve sealed when using the engine. Features: Makes flushing outboard quick and easy Unique previously patented slide valve replaces the outboard flushing port plug The O-ring seal closes off the port when operating the engine Quick connect on hose snaps onto valve for flushing No plug to remove and no difficulty turning of hose into the port Takes the hassle out of flushing your outboard Fits all outboards equipped with a flushing port Kit consists of slide valve, hose quick connector, and washer WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Service Kits Box Dimensions: 2"H x 4"W x 7"L WT: 0.1 lbs UPC: 733572010602

Read more less

Actuator Caps, Position Sensors & 30' CableActuator Upper Hinge with Coil – PortWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Reverse "Y" AdapterThe Reverse "Y" Adapter has two male plugs with special power isolation circuitry for added safety. When one plug is connected to a receptacle, the circuitry isolates the second plug. The reverse "Y" provides 50A 125/250V power when only two 30A 125V receptacles are available. Note: Reverse "Y" will NOT work with 50A, 125V, 3-wire inlets. Power is provided in both circuits to the 4-wire inlet, but the dock side receptacles limit the current in each circuit to 30A. The two 30A 125V receptacles must be supplied from a single power source providing from 208V to 250V between them for proper operation. Boat Side: Female Connector 50A 125/250V w/Sealing Collar System Attaches to boat inlet or cordset Dock Side: Male Plug 2-30A 125V Locking Attaches to dockside receptacle or cordset WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Y-Adapter Box Dimensions: 5"H x 12"W x 13"L WT: 7.4 lbs UPC: 093344501357 Quick Guide (pdf)

Read more less

3" x 36" Blue Silicone Wet Exhaust HoseTrident Silicone Marine Wet Exhaust Hose gives the best performance with a cool quiet elegance. Silicone naturally handles higher temperatures and will last longer than rubber exhaust hoses. The silicone will also transfer less heat into the engine room. The 202V series Silicone Wet Exhaust products are designed for short straight connections and come with a 10-year warranty.Trident Silicone Marine Wet Exhaust & Water-Coolant Hose is the ultimate in extra thick soft wall silicone quality with very high temp. performance and extra long service life. Exceeds SAE J2006-R1, and ABYC & NMMA P-1 exhaust standards. #202V Glossy Blue “Very Hi Temp” has 4-6 ply polyester reinforcement and 350°F (177°C) Max. Used worldwide on premium boats, yachts, and special service vessels. It has become the super yacht standard.Specifications: 10-year warranty Tube & Cover: High-temp silicone Color: Blue Reinforcement: Polyester reinforcement Temperature Range: 350°F (176.7°C) Lengths: 3’ (.914m), 6’ (1.83m), 12’ (3.66m) *Burst Pressure is 4 x Working Pressure*All wet exhaust hose to be used on open-ended systems Quick Guide (pdf)

Read more less

Low Profile Group 24 Adjustable Battery TrayThis battery tray is made of heavy-duty, non-corrosive black plastic. The tray includes an adjustable-height crossbar and two retaining bolts.Features: Meets ABYC Standard E-10 and U.S. Coast Guard requirements Patented design Install with #10 fasteners Specifications: Battery Series: 24/24M Inside Dimensions: 10-5/8" x 7-1/4" x 8-1/2" Quick Guide (pdf)

Read more less

Pontoon PowerDrive™ 70 Trolling Motor with Foot Pedal - 24V - 70LB - 48"Put Minn Kota power to work on your pontoon. You get a quiet, steady, all-day performance that's right for you. And with quick and easy mounting, you get a motor that's built to let you sit back and appreciate a perfect day on the lake.Deploy-Assist LeverGet in and out of the water easily. Just depress the lever to deploy your trolling motor and when it's time to move, it stows easily and securely.Aluminum Quick Release BracketQuickly, easily remove your motor with this aluminum bracket. It comes standard on PowerDrive Pontoon models and features a quiet, secure locking system.PowerDrive Foot PedalControl speed, steering, and momentary and constant on/off with the PowerDrive foot pedal, which is waterproof and features an 18' cord. Not included on GPS-enabled models.Push-to-Test Battery MeterPress a button to get an instant "stage of charge" reading.Digital Maximizer™Provides up to 5 times longer run time on a single battery charge. These variable-speed trolling motors let you dial in your exact speed, and they deliver only as much power as you need, helping to conserve your battery for a full day of fishing.Power PropDelivers extra power to push through any fishing scenario and excels in open water.Indestructible Composite Shaft — Guaranteed for LifeAt the core of your Minn Kota trolling motor is an indestructible composite shaft. It's a Minn Kota exclusive, and they guarantee it for life.Cool, Quiet PowerEvery Minn Kota lower unit runs cool to extend trolling motor life and stays quiet.What's IncludedPontoon PowerDrive 70 lb. 48" Foot-Control Motor, Corded Foot Pedal, MKP-37 Prop, MKA-16-03 Quick Release Bracket and Mounting HardwareSpecifications: For Use In: Freshwater Shaft Length (inch): 48" Max Thrust (pounds): 70 lbs. Voltage: 24 One-Boat Network Compatible: No QUEST Series: No Spot-Lock: No Built-In Sonar: None Foot Pedal Style: Side-to-Side / Electric Control: Foot Pedal Auto/Stow Deploy: No Power Trim: No Power Steering: Yes Lift-Assist: No Bowguard: No Wireless Remote: No i-Pilot Link (GPS): No i-Pilot (GPS): No AutoPilot: Yes CoPilot: No Speeds: Variable Digital Maximizer: Yes Battery Meter: Yes Max Amp Draw: 42 Mount Style: Bolt-on Mounting Location: Bow-mount  Motor Style: Electric-steer Prop: Power Prop (MKP-37) Warranty: Two-Year Warranty Specifications: Autopilot: Yes Built-In Transducer: No Control Type: Foot Control Included Propeller: MKP-37 Mounting Style: Bow Salt Water/Fresh Water: Fresh Series: PowerDrive Shaft Length (Inches): 48" Thrust (Pounds): 70 lbs Voltage - Input Range (Volts): 24v Box Dimensions: 10"H x 17"W x 62"L WT: 48.7 lbs UPC: 029402051021 Owner's Manual (pdf)

Read more less

Portable Fuel Tank Cap with Tether - EPA CertifiedHigh-flow valve exceeds OEM engine fuel flow requirements. Be sure your fuel system is safe; the ratchet feature ensures a proper seal while the tether prevents cap loss. Very versatile; designed for 0 to 350 horsepower engines.Features: Standard 2 ¼ inch neck for convenience Includes high-flow automatic vacuum valve Tether Included Compatible with 8803LP/8806LP/8812LP/8812LLP Tanks Easy-to-grip cap features ratcheting noise so you know it’s properly sealed Quick Guide (pdf)

Read more less