Boat Outfitting

52mm (2-1/16") Viewline Voltmeter 18-32V - Black Dial & BezelThe Viewline voltmeter displays the status of the generator and battery and their loads on a voltage scale. Values exceeding the normal charging voltages can therefore be monitored exactly. Features: Installation Dimension: 52mm - 2-1/16" Color: Black Lens: Plastic Double Anti-Fog Bezel Model: Black Round Measurement Range: 18 - 32V DC Category: Voltmeters Series: Veratron Viewline Application: VDO Engine Monitoring Signal Analogue: 0 - 32V DC IP Class Front: IP67 (IEC 60529) Operating Voltage: 18 - 32 Volt DC Functionality: 24 Volt Battery Condition Input: Analog Bezel Interchangeable: Yes - Clip-On Warning Light: Red LED Via Plus And Min Communication: Analog This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Box Set: No Gauge Size: 2-1/16" Gauge Type: Voltmeter/Ammeter Series: ViewLine Voltage - Input Range (Volts): 18-32v Box Dimensions: 3"H x 4"W x 8"L WT: 1.5 lbs UPC: 7640178722811 Brochure (pdf)

Read more less

EngineBox - Single EngineThe EngineBox expands the possibilities of the NavBox for multi-engine applications or can be used as stand-alone when navigation information is not required. The EngineBox has a NMEA 2000® and a J1939 CAN port. The EngineBox can also be used on older, completely analog engines, thanks to the analog input ports provided and designed for RPM data, resistive sensors and capacitive sensors. The EngineBox has to be set up using an intuitive PC configuration tool making it easy for programming the inputs (delivered free of charge). Thanks to the ISO 8846:1990 compliance, the EngineBox is also designed to be installed in engine compartments.The Veratron Diagnostic Tool USB to NMEA 2000 (A2C3931270001) and Veratron Configuration Software tool are needed to configure this Engine Box.Features: Analog to NMEA 2000® gateway  J1939 to NMEA 2000® gateway  2 Models for single engine and dual engine configurations  Compact design  Status LED  Operating temperature range -40°C/+85°C Technical Specifications:  1x J1939 (2x J1939 Dual Engine)  1x M12 5 pins NMEA 2000®  1x Input 0–4 kHz for RPM (2 inputs with Dual Engine Model)  4x Inputs 0–400 Ohm (up to 8 inputs with Dual Engine Model)  2x Inputs 4–20 mA  1x Input 0–5 V (2 inputs with Dual Engine Model) In the Box: Engine Cable Cable Harness Safety Instructions *Sold as an Individual This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Voltage - Input Range (Volts): 8-16v Gauge Type: Multifunction Gauge Size: N/A Box Set: No Box Dimensions: 4"H x 6"W x 6"L WT: 1.35 lbs UPC: 7640178724426 Brochure (pdf)

Read more less

Max Control Waste Digester & Odor Eliminator Drop-In Pouch - 12-PackDometic Max Control-Natural Holding Tank Treatment eliminates odors and effectively breaks down waste in your sanitation holding tank without the use of formaldehyde or bronopol. The fast-acting proprietary enzyme/bacteria formula enhances beneficial bacteria and will continue to work and benefit downstream systems like septic or municipal treatment facilities. A light, appealing fragrance means Max Control-Natural works for portable and gravity toilets and can be used in black or gray water tanks. California compliant and approved for use throughout North America. Use 4 oz. of liquid per 40-gallon black or gray water tank treatment.Features: Contains a highly effective odor-controlling bacteria-based technology Enzymes break down waste solids to maintain a clog-free environment Has a light, appealing fragrance for open system applications (portables and gravity toilets) Helps keep tank sensors clean and unobstructed Works in black or gray water tanks Less packaging material per dose than most competitors’ enzyme products No formaldehyde or bronopol Concentrated formula - 1 pouch or 4 oz. liquid per 40-gallon black or gray water tank treatment Specifications: Type: Bilge & Holding Tank Box Dimensions: 2"H x 8"W x 9"L WT: 1.6 lbs UPC: 713814344702 Quick Guide (pdf)Brochure (pdf)

Read more less

12"x12" Edge Mount Trim Tab Kit with Pro Control™ AutoSpecifications: Length x Width: 12"x12" Boat Length: 17'-30' Hinge Height: 2" (5.1cm) Minimum Transom Height: 11" (27.9cm) Keypad: Auto Kit Includes: (1) Pro Control Auto Keypad Kit (15174-107) (1) Pro Control Auto IMU (15180-001) (2) 12-gauge 304 (2.7 mm) stainless steel standard finish blades: Standard blades - with a 5/8" (1.6 cm) flared trailing edge. Edge Mount blades - with 1" (2.5 cm) turned-up edges a 5-degree taper on both sides to the trailing edge) and a 1/8" (3.2 mm) diameter hinge pin. (2) 2.25” Stroke SD Pro Actuators, 11.5” pin to pin (15189-001) (6) Micro C Tee Connector (30267-001DD) Micro C Power Cable with Fuse and Ground (15197-101) (2) 6’ (1.82 m) Micro C Drop cables (15199-101), (1) 15’ (4.57 m) (30269-001 and (1) 25’ (7.62 m) (30269-004) Micro C Drop cables (2) 6 Pin Deutsch to Micro C Actuator Network Adapter Cable (30377-001) (2) 3' (.91 m) Pro Control Actuator Power Pigtail (30378-001) (1) Wake Signal Adapter for Non-Mercury Systems (15207-101) (2) Corrosion proof Upper Mounting Brackets with gland seal (15193-101) (2) Corrosion-proof Lower Mounting Brackets (15194-101)

Read more less

EngineBox - Double EngineThe EngineBox expands the possibilities of the NavBox for multi-engine applications or can be used as stand-alone when navigation information is not required. The EngineBox has a NMEA 2000® and a J1939 CAN port. The EngineBox can also be used on older, completely analog engines, thanks to the analog input ports provided and designed for RPM data, resistive sensors and capacitive sensors. The EngineBox has to be set up using an intuitive PC configuration tool making it easy for programming the inputs (delivered free of charge). Thanks to the ISO 8846:1990 compliance, the EngineBox is also designed to be installed in engine compartments.The Veratron Diagnostic Tool USB to NMEA 2000 (A2C3931270001) and Veratron Configuration Software tool are needed to configure this Engine Box. Features: Analog to NMEA 2000® gateway  J1939 to NMEA 2000® gateway  2 Models for single engine and dual engine configurations  Compact design  Status LED  Operating temperature range -40°C/+85°C Technical Specifications:  1x J1939 (2x J1939 Dual Engine)  1x M12 5 pins NMEA 2000®  1x Input 0–4 kHz for RPM (2 inputs with Dual Engine Model)  4x Inputs 0–400 Ohm (up to 8 inputs with Dual Engine Model)  2x Inputs 4–20 mA  1x Input 0–5 V (2 inputs with Dual Engine Model) In the Box: Engine Cable Cable Harness Safety Instructions *Sold as an Individual This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Gauge Size: N/A Box Set: No Voltage - Input Range (Volts): 8-16v Gauge Type: Multifunction Box Dimensions: 4"H x 6"W x 6"L WT: 1.45 lbs UPC: 7640178724433 Brochure (pdf)

Read more less

NMEA 2000 Liquid Level Sensor - 200 to 600mmThe NMEA 2000® Liquid Level Sensor overcomes a laundry list of issues that plague traditional fluid level monitoring solutions, including being certified for drinking water—an industry first.  Powered by an NMEA 2000 network, three models are available to accommodate a wide range of tank depths from 200 mm to 1500 mm.The capacitive sensor is easily selectable between fresh and waste water, and is micro-adjustable for tank size. Unlike reed technology that only reports tank level in graduated steps, the Veratron NMEA 2000 Liquid Level Sensor, thanks to capacity measuring technology, offers level linearity on the full range. This provides precise data to make informed decisions on refilling and pumping out or discharging, for up to 4 tanks.Completely plug-and-play, the Veratron sensor simply connects directly into the NMEA backbone with its integrated Micro-C M12 5-pin NMEA 2000 connector. This provides the nominal 12V power and the ability to view tank level from any networked display.UL94, CE, REACH and RoHS compliant, the NMEA 2000 Liquid Level Sensor is IPX9K rated as an exposed device. Features: Includes Flange Installation Kit 300mm NMEA Pigtail Connection Technical Specifications: Connector - NMEA 2000 Micro-C 5 pin M12 Male IP Protection Class - IPX9K In the Box: Sensor Sealing Kit Rubber Gasket Mounting Bracket Mounting Screws and Allen Wrench  *Sold as an IndividualThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Color: Silver Box Dimensions: 4"H x 4"W x 30"L WT: 1.45 lbs UPC: 7640178729384

Read more less

Joystick LED Trim Tab ControlLectrotab’s Joystick LED control incorporates features requested by boat owners to provide user-friendly control for a more enjoyable boating experience.Features: Single “Joystick” control NMEA 2000 compatible LED display of each trim tab position Microprocessor-based trim tab control with LED tab position indicators NMEA 2000 compatible with JLC-NMEA adapter Move both tabs up or down simultaneously with a single motion Dual station ready – just add a second JLC-11 and JR-* cable (sold separately) Automatic return to last tab position if the ignition key is turned off and back on again Completely sealed, completely waterproof, and will not deteriorate in sunlight Automatic tab retraction and calibration with key or accessory switch off Easy upgrade from any of our Lectrotab controls No external power module required LED tab position indicators dim automatically in darkness and brighten in sunlight Single or Dual Actuator per tab Operates on 12 or 24 VDC systems Specifications: Display Color: Black Number of Stations/Actuators: Single or Dual Station/1 or 2 Actuator/tab Overall Width: 3.0"/77mm Overall Height/Thickness: 3.0" (77mm)/2.0" (50mm) Mounting Hole Cutout (Diameter): 2.625"/66.7mm DC Voltage: 12/24 Fuse Size Power Input (1 Actuator Per Tab): 12 VDC-15 or 20 AMPs 24 VDC = 10 AMPs Fuse Size Aux. (Must Connect): 1 to 2 AMPs Quick Guide (pdf)

Read more less

12 V Heavy Duty Tab Actuator - 6' Cable Lectrotab meets the needs of boats operating at high speeds or in rough conditions by offering its heavy duty trim tab actuator.  The heavy duty actuator features a reinforced upper mounting boss and a 12 gauge stainless steel upper bracket.  Lectrotab heavy duty trim tab actuators are precision-engineered to combine quiet operation with a non-hydraulic, maintenance free design. The unit is corrosion free, ensures very accurate tab positioning, provides maximum lift force, and is totally self-contained for easy installation.  The actuator assembly is packaged in a non-metallic permanently sealed housing. No components need to be installed inside the boat.  Most importantly, unlike hydraulic trim tabs, there is no oil to leak out.  The actuator incorporates a standard or low profile transom mounting bracket. Features: Stainless Steel upper mounting bracket Reinforced actuator upper mounting boss Upper ram seal location cannot be damaged due to fouled ram or barnacle growth Utilizes internal pressure equalization system Internal brake system prevents unwanted tab movement when under way or backing down Quiet operation All actuators fully load tested to push 1000 lbs of force Non-metallic external structure which cannot corrode and will not deteriorate in the sun or under water Technical Specifications: Actuator DC Voltage - 12 V Actuator Stroke Length - 2.25" (57 mm) Actuator Cable Length  - 6' (1.8 M) Actuator Vertical Height - 11.875" (302 mm) Upper Mounting Bracket - Stainless Steel - 12 gauge Lower Mounting Bracket - Standard *Sold as an Individual Owner's Manual (pdf)Brochure (pdf)

Read more less

SLT Self-Leveling Tabs for Small BoatsGood things come in small packages. Now you can have the durability of a Bennett trim tab system with a simple, quick and easy installation. There is nothing to do inside the boat - only the mounting of two actuators and two tabs at the transom. It's an affordable, simple solution for small boats.The SLT uses some of the same high-quality, proven materials and durable design used in Bennett standard systems for more than 50 years. Your SLT kit includes: Two 14-gauge stainless steel trim tab assemblies with Bennett's exclusive interlocking hinge Two strong and flexible composite actuators All stainless steel hardware - no plastic! Bennett's no-hassle 5-year warranty on All Components With the SLT, you can get on plane quickly, improve your hole shot, reduce engine laboring, improve fuel efficiency and eliminate porpoising. The SLT reacts instantly to boat speed and water pressure by adding trim when it's needed. You get a better ride while the SLT does all the work.It's a value that can't be beat - a quality, durable system that's quick and easy to install and backed by the best customer service you will experience anywhere.Tab Size: 6" x 8"Boat Size: up to 16'WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Construction: Stainless Steel Box Dimensions: 4"H x 10"W x 11"L WT: 6 lbs UPC: 666285146705 Quick Guide (pdf)

Read more less

Mini Stainless Steel Single Drop-In Horn with Stainless Steel Grill - 12V Low PitchFeatures: All Stainless Steel Inside & Out 304 Stainless Steel inside and out including a sealed sound unit No rust Guaranteed for 5 years All meet ABYC A-23 for boats up to 12 meters Pre-wired It fits existing hole patterns Specifications: Dimensions: 3"L, 3-1/4"W, 1-3/4"H (7.5 x 8 x 4.5 cm) Max Amp Draw: 3 Amps. Grill Dimensions: 4-7/8" x 2-3/8" with 4" hole centers Rating: 106 dB @ 1 Meter Installed Specifications: Color: Stainless Voltage - Input Range (Volts): 12v Box Dimensions: 2"H x 5"W x 13"L WT: 1 lbs UPC: 768170100509

Read more less

Deluxe All-Stainless Dual Trumpet Horn - 24VFeatures: All Stainless Steel Inside & Out 304 Stainless Steel inside and out including a sealed sound unit No rust Guaranteed for 5 years. All meet ABYC A-23 for boats up to 12 meters Pre-wired It fits existing hole patterns Specifications: Dimensions: 18-1/2"L, 8"W, 5"H (47 x 20.5 x 12.5 cm) Max Amp Draw: 4 Amps Rating: 122 db@ 1 Meter Specifications: Voltage - Input Range (Volts): 24v Color: Stainless Box Dimensions: 4"H x 11"W x 21"L WT: 3.65 lbs UPC: 768170124284 Quick Guide (pdf)

Read more less

Express® Mach4™ - Right Hand - Stainless Steel Propeller - EX-1417-4 - 4-Blade - 14.5" x 17 PitchThe Prop that put the "four" in Perfourmance! Turning Point's Four Blade revolutionized the propeller market when it was introduced. No one had ever produced a propeller with two different blade shapes (they call it Dual Geometry) for 90-300+hp applications. This prop is uniquely engineered with two blade geometries: (diagram label 2)two blades utilize the Hustler high performance variable rake and aggressive pitch design for incredible hole shot and cornering, and (diagram label 1) two blades utilize an offshore style design for high speed and maximum stern lift.These props re-wrote the rules, proving that you can run a four blade that has unprecedented hole shot, handling, and rough water stability without the top-end speed loss you experience with other manufacturers’ propellers.Now manufactured in our Industry leading TP17 stainless, the Express Mach4 series is perfect for any application that demands enhanced acceleration, cornering, and load carrying capabilities. This prop series is ideally suited for watersports, sterndrive boats, tri-toons, bay boats, and any vessel that can use stern lift. It is our best upgrade of older stainless designs from the 70’s, 80’s, 90’s, and ’00’s, and will outrun most newer props, including five blade ski props.Proprietary Stainless Steel, TP17™Formulated to meet the exacting requirements of the New Express Mach3 and Mach4 designs. 20% higher chromium content than the competition - more shine, better corrosion resistance. Almost 250% Stronger and 5X more durable than run-of-the-mill stainless steel. This new material allows Turning Point's Engineers and Designers the freedom to produce radical new designs that will help you wring the most performance out of your boat.Large Free Flowing Exhaust PortsTurning Point's Propeller Housings have massive Exhaust flow pathways. Their Propellers have 40% more exhaust flow Area versus competitive product. More exhaust flow and less backpressure can generate more horsepower. Like headers for your boat.Turning Point manufactures Express propellers to fit 9.9(bigfoot)-300+hp Evinrude®, Force®, Honda®, Johnson®, Mariner®, Mercruiser®, Mercury®, Nissan®, OMC®, Parsun®, Suzuki®, Tohatsu®, Volvo® Penta®, and Yamaha® Outboards and Sterndrives. Choose one of our Lifetime Warranty MasterGuard Installation Kits to fit your engine, then choose the propeller that matches your boating requirements. There are 3 and 4 blade, left and right rotation prop models with a variety of diameter and pitch options available for almost all boat types. Turning Point's Props Run Faster, Pull Harder, and Handle Better.Note: A Hub Kit is required for installation of this propeller. See the Turning Point Selection Chart or the Prop Wizard™ for hub kit selection.  WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Pitch: 17 Material: Stainless Steel Diameter (Inches): 14-1/2" Rotation: Right Box Dimensions: 8"H x 16"W x 16"L WT: 17 lbs UPC: 652480200816 Quick Guide (pdf)Brochure (pdf)

Read more less