Boat Outfitting

High-Build Primer Surfacer - 20oz Aerosol Can - GreyHigh-Build Primer Surfacer is a flexible acrylic coating for priming steel, aluminum, urethane, fiberglass, and plastics.Features: Provides superior adhesion Excellent filling properties Works on multiple substrates, including metal and plastic Easy to sand Topcoat with most refinish material Applications: Steel Aluminum Plastic SMC Fiberglass Properties: 20 oz. Aerosol Coverage: 11 sq. ft. at 2 mil DFT Coats: 2-3 medium wet Dry time: 1 hr Flash time: 5-10 min between coats

Read more less

XXX Specialty Gel Adhesive Remover - 20oz Aerosol CanXXX Specialty Gel Adhesive Remover is a solvent-based gel for removing adhesive residue as well as tar, sap, silicone, grease and oil from interior or exterior surfaces. Gel formula stays in place on vertical and horizontal panels and evaporates more slowly than typical solvent adhesive removers. Features: Unique gel improves efficiency and eliminates product waste 50 state compliant Slow-evaporating formula stays wet long enough to soften adhesive Run-resistant gel stays where you spray it Quick acting Dissolves adhesive residue, tar, sap, and more Available in a convenient aerosol Ideal for use on interior or exterior surfaces Applications: Plastic Leather Vinyl OEM panels Cured two-component finishes Glass Bare aluminum Bare steel

Read more less

XXX Universal Surface Cleaner - 1 QuartXXX Universal Surface Cleaner is a super compliant, waterborne cleaner that removes solvent and water soluble contaminants before refinishing.Features: 2-in-1 cleaner reduces the products needed in the collision center Helps eliminate static for improved metallic orientation and reduced dust contamination Solvent is strong in waterborne formula Exceptional grease-cutting power Multifunctional for primed or painted surfaces, leather, vinyl, plastic, aluminum, and bare metal Applications: Primed or painted surfaces Leather Vinyl Plastic Aluminum Bare steel Properties: Gallon or Quart Zero VOC

Read more less

1K HS Clear - 20oz Aerosol Can - Gloss Finish1K HS Clear is a high solids clearcoat, perfect for refinishing small accessories, door jambs, underhoods, inner panels, and new part cut-ins.Features: Improved fan pattern is second only to a spray gun Three gloss levels: gloss, semi-gloss, and matte Matches OEM finishes  Quick drying for increased production Shop floor compliant (NESHAP 6H) Save time and material Reduces repair time and steps to maximize shop efficiency Applications: Ez Coat™ Factory Pack™ Basecoat Properties: 20 oz. aerosol Coats: 2 - 3 medium coats Flash Time: 3 - 5 min between coats Coverage: 28.6 sq ft. @ 1 mil DFT

Read more less

Guide Coat - 16oz Aerosol Can - BlackGuide Coat Black is an aerosol coating that helps detect low spots, sand scratches, or other minor imperfections while sanding primer.Features: Quick drying Improves production Won’t clog sandpaper Helps create a perfect repair Applications:Primed surfaceProperties: 16 oz. Aerosol Black

Read more less

High-Build Primer Surfacer - 20oz Aerosol Can - BlackHigh-Build Primer Surfacer is a flexible acrylic coating for priming steel, aluminum, urethane, fiberglass, and plastics.Features: Provides superior adhesion Excellent filling properties Works on multiple substrates, including metal and plastic Easy to sand Topcoat with most refinish material Applications: Steel Aluminum Plastic SMC Fiberglass Properties: 20 oz. Aerosol Coverage: 11 sq. ft. at 2 mil DFT Coats: 2-3 medium wet Dry time: 1 hr Flash time: 5-10 min between coats

Read more less

Rubberized Undercoating - 24oz Aerosol Can - BlackRubberized Undercoating is a premium, single-component, paintable, textured coating for sound dampening, chip resistance, rust protection, and corrosion protection.  Features: OEM recommended Uniform final appearance Quality asphalt-free formula Paintable without bleed-through Sound-dampening properties Aerosol includes a straw for tight spots Fast-drying Chip and corrosion resistant Applications:Properly prepped and primed surfacesProperties: 24 oz. Aerosol Black Paintable Distance: 6 - 8" Coats: 2 - 3 medium wet Flash time: 3 - 5 minutes Top Coat time: 30 minutes

Read more less

Premium Powder Guide Coat - 16oz Aerosol CanDry powder for identifying low spots, pinholes, and other surface defects when sanding primer.Features: Dries instantly Sandable immediately Will not clog sandpaper No masking required No mess or waste Overspray wipes off Applications:Any 1K or 2K PrimerProperties: 16 oz. Aerosol Black

Read more less

2-IN-1 Seam Sealer - 9.5oz Tube - Black2-IN-1 Seam Sealer is a beadable and sprayable, high-performance, one-component MSP seam sealer for interior or exterior seams and OEM-sprayed sound-dampening pads.Features: OEM recommended Direct-to-metal Paintable immediately with most solvent-based coatings  Remains flexible without shrinking or cracking Colors match many OEM sealers Optimal working time Corrosion resistant Resistance weldable Excellent adhesion Applications: Properly prepped, primed, or painted surfaces Bare metal Properties: 9.5 oz. Cartridge Available in white, gray, beige, and black Working Time: 20 min Set Time: 1 hr Paint Time: 0-24 hr

Read more less

2K Urethane Chip Guard Kit2K Urethane Chip Guard is a job-sized, two-component, shake-and-shoot, textured coating for reproducing a variety of OE textures and chip guards. Two-component system helps eliminate common problems seen with one-component products, such as long flash times, pinholes, solvent trap, delamination, and solubility.Features: OEM recommended 2K durability with 1K convenience Reproduces fine to coarse and light to heavy OE textures Builds heavy textures without trapping solvent No flash time required between coats 50 state compliant Pinhole free Easy-to-use shake-and-shoot system R.O. billable unit 16 defined textures with detailed instructions Non-yellowing and non-staining Tintable, paintable, or can be used as a textured top coat Impact and chemical resistant Excellent for sound dampening Applications: Steel Aluminum Galvanized steel Existing OEM paint Polyester fillers E-coat Fiberglass SMC and FRP Epoxy primer 2K urethane primer and sealer Properties: Opaque gray 12 oz. (mixed) kit Produces a variety of textures Pot Life @ 70°F and 50% R.H.: 20 minutes Flash Time: 0 – 20 minutes Paint Time: 20 minutes – 4 hours

Read more less

1K Seam Sealer - 10.1oz Tube - WhiteSEM 1K Seam Sealer is a versatile, single-component sealer for sealing interior or exterior seams, joints, and voids.Features: OEM recommended Direct to metal Paintable immediately   Remains flexible without shrinking or cracking Colors match many OEM sealers Optimal working time Corrosion resistant Resistance weldable Excellent adhesion Applications: Properly prepped, primed, or painted surfaces Bare metal Properties: 10.1 oz. tube Working Time: 5-10 min Set Time: 20-30 min Paint Time (solvent): 0-24 hr Paint Time (waterborne): 1 hr Cure Time: 4mm/24 hr

Read more less

2-IN-1 Seam Sealer - 9.5oz Tube - White2-IN-1 Seam Sealer is a beadable and sprayable, high-performance, one-component MSP seam sealer for interior or exterior seams and OEM-sprayed sound-dampening pads.Features: OEM recommended Direct-to-metal Paintable immediately with most solvent-based coatings  Remains flexible without shrinking or cracking Colors match many OEM sealers Optimal working time Corrosion resistant Resistance weldable Excellent adhesion Applications: Properly prepped, primed, or painted surfaces Bare metal Properties: 9.5 oz. Cartridge Available in white, gray, beige, and black Working Time: 20 min Set Time: 1 hr Paint Time: 0-24 hr

Read more less