Chesapeake Black 2" Voltmeter (10-16 VDC)Perimeter-lighted Black dial with stylish Blue and White graphics, polished stainless steel bezel, contoured White pointer and domed glass lens.A voltmeter indicates the battery voltage and the general condition of the battery charging system. The meter requires no warm-up and indicates voltage changes instantly.2" - Hole Size: 2.0625" (53mm)Specifications:
Anti-scratch glass lens
Perimeter lighted back light
12 VDC negative ground
Can be adapted for 24 VDC systems
Factory P/N VP9154*Sold as an Individual**Gauge Cover not IncludedThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications:
Gauge Type: Voltmeter/Ammeter
Series: Chesapeake Black
Voltage - Input Range (Volts): 12/24 V
Gauge Size: 2"
Box Set: No
Box Dimensions: 4"H x 4"W x 5"L WT: 0.3 lbs
UPC: 759266137059
Quick Guide (pdf)
Euro White 2" Voltmeter (10-16 VDC)Perimeter-lighted White dial with bold Black graphics, Black aluminum bezel, contoured White pointer and flat glass lens.A voltmeter indicates the battery voltage and the general condition of the battery charging system. The meter requires no warm-up and indicates voltage changes instantly.2" - Hole size: 2.0625" (53mm)Specifications:
Anti-scratch glass lens
Perimeter-lighted White dial
12 VDC negative ground
Can be adapted for 24 VDC systems
Factory P/N VP9136*Sold as an Individual**Gauge Cover not IncludedThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications:
Gauge Type: Voltmeter/Ammeter
Series: Euro White
Voltage - Input Range (Volts): 12/24 V
Gauge Size: 2"
Box Set: No
Box Dimensions: 4"H x 4"W x 5"L WT: 0.3 lbs
UPC: 759266129115
Quick Guide (pdf)
Platinum 2" Trim Gauge for Mercury, Mariner, Mercruiser, Volvo DP, Yamaha 2001 & NewerFaria Beede’s Platinum Series Instruments feature spun aluminum gauge dials with custom graphics and a polished stainless steel bezel providing a rugged, elegant look. All Platinum Series gauges feature Faria's revolutionary domed glass Fog-Resistant lens. These lenses shed condensation and resists scratching and other types of fouling common in the marine environment. 2"- Hole Size: 2.0625" (53mm)For Engine Types:(Mercury / Mariner / Mercruiser / Volvo DP / Yamaha-2001 and newer)Specifications:
Domed Glass Anti-fog, Scratch Resistant Lens
Stainless Steel Bezel
Blue LED Illuminating around the Perimeter of the Dial
Illuminated Backlit Fire-Orange Tip Pointer
Factory P/N GP5086*Sold as an Individual*Gauge Cover not IncludedThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications:
Voltage - Input Range (Volts): 12/24 V
Series: Platinum
Gauge Type: Trim Guage
Gauge Size: 2"
Box Set: No
Box Dimensions: 3"H x 4"W x 5"L WT: 0.35 lbs
UPC: 759266220195
Brochure (pdf)
A1200SCPEIC ActuatorBennett actuators are strong but flexible nylon/fiberglass hydraulic cylinders. The piston-like arms push tabs into position. Fluid flows through a concealed hole in the upper hinge at the top of the actuator, thus eliminating external hoses subject to damage.Features:
Bennett actuators are strong but flexible nylon/fiberglass hydraulic cylinders
The piston-like arms push tabs into position
Fluid flows through a concealed hole in the upper hinge at the top of the actuator
Designed for installations where space is limited
Eliminates external hoses subject to damage
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
ST16ATP Performance Sport Tab System w/Auto Trim Pro12" x 16"Manufactured with heavy-gauge reinforced stainless steel and powerful hydraulic actuators. Performance Tabs combine strength, durability, and good looks to achieve your boat’s maximum potential.Features Include:
Get on plane fast and stay on plane at intermediate speeds
Correct listing and uneven loads
Reduce pounding and eliminate porpoising
Improve visibility and safety
Low maintenance with long-term value
Kits Include:
(1) Control unit (ATP)
(2) Trim plane assemblies
(2-4) Hydraulic actuators
(1) Hydraulic power unit
Hydraulic tubing and hardware
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications:
Construction: Stainless Steel
Actuator Type: Hydraulic
Box Dimensions: 6"H x 15"W x 32"L WT: 35 lbs
ConnectPro® 3-Wire ReceptacleFeatures:
Universal design for 2 or 3-wire configuration 12, 24, 12/24, 24/36 or 36 volt systems
Watertight sealing cap
Corrosion resistant, plated brass electrical components
Drain holes in receptacle keep water away from electrical components
Perma-Lock screw terminals will not loosen under extreme hull vibrations
Standard 1-1/8" diameter mounting hole
Easy to install, with supplied mounting plate for front panel installation, or locking ring for rear access installation
Accepts 10 and 8 gauge wire
Easily replaces other trolling motor plugs and receptacles
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Type: Receptacles
Box Dimensions: 2"H x 5"W x 6"L WT: 0.2 lbs
UPC: 093344304651
Quick Guide (pdf)Brochure (pdf)
Shore Power Straight Adapter, 30A M-15A-FErgonomic EEL-style adapters allow you to connect from one dockside receptacle (or other power source receptacle) to one boatside inlet (or equipment) of dissimilar power configuration. They feature a power-on LED to confirm connection and integral fittings with no wire between the end fittings. They are high-quality, but do not have sealing boots and are not recommended for use in wet applications. Straight Adapter - Not recommended for useis wet locationsBoat Side: Female Connector - Attaches to boat inlet or cordset15 or 20A 125v Straight BladeDock Side: Male Plug - Attaches to dockside receptacle or cordset20A 125V LockingWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Type: Straight Adapter
Box Dimensions: 3"H x 4"W x 8"L WT: 0.5 lbs
UPC: 093344051890
45° Adjustable Fitting for Back of UP Series HelmsTypical Application:Fitting for the back of the UP series helmsSpecifications:
ORB, Size #6 to 3/8 COMP FITTING
Helm Side = 9/16 - 18 UNF 2A
Hose Side = 9/16 - 24 UNEF 2A
Honda 5, 8, 9.9. 15 (1980-2000)TROLLMaster offers a variety of different servo mounting hardware kits to allow easy installation on the most popular kicker motors. The motor-specific hardware kit must be purchased as a separate item. As long as you know the make, HP and year of your kicker motor, you can determine which hardware kit you need.
Deck Fill for Pressure Relief Systems - Angled Body & Scalloped Black Plastic CapPressure relief systems are designed with automatic diurnal emission control and overpressure relief safety valves built into the cap of the fill. The overpressure relief safety valves are engineered to release pressure above 1 psi. The high-flow vacuum valves allow fresh air to enter the fuel tank to replace the fuel being consumed by the engine. Other components of a pressure relief system are designed to ensure the tank fills to the proper level every time without spit-back or well-back. All Attwood pressure relief systems are designed to ensure water does not enter the fuel tank and are compatible with Jerry Can and marine nozzle refueling.Features:
Fits 1-1/2 (inch) fill hose and 5/8 (inch) vent hose
Triple high-flow vacuum valves ensure maximum make-up airflow (compatible with high HP applications)
Dual 1 psi diurnal emission control and overpressure relief safety valves built into the cap
Automatic nozzle shutoff 4-18 gpm
Black Composite finish
An essential component of VaporTec and SecureStop
Designed and tested to prevent water from entering the fuel system
EPA / CARB Certified
Hinged audible click cap meets EPA requirements
Meets CARB 13 CCR 2235 and ISO 13331 nozzle mating and retention standards
*Compatible with Ethanol blended fuels Quick Guide (pdf)