Boat Outfitting

18 x 12 Standard Trim Plane AssemblyBennett trim planes are made of high-quality 304 stainless steel and remain strong and rigid, even in the most challenging situations. Each trim plane assembly includes a trim plane, backing plate and hinge for one side of the boat.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Mast MountsStill the first choice for boat owners the world over, Scanstrut Mast Mounts are the ultimate solution for mounting radars on yachts masts.Raising the antenna clear of any obstructions or interference, the mast mount is a classic and reliable installation.Features Easy and quick to install with all fastenings supplied Attached to mast by four swivel feet matching the profile of any mast 12 point fixing using highest quality Monel rivets for a secure installation Nylon washers for all fastenings to protect paint finish Waterproof cable grommet included to seal cable entry into mast Materials Marine grade 6082 aluminium Polyester powder coated for a durable and gloss white finish Kit includes 1 x Mast Mount 4 x Swivel mounting feet 1 x Complete fastening pack Fits:Furuno models: 1712,1715,1721,1722,1723,1724,1823,1824,DRS2DLowrance model: LRA 1500 Specifications: Construction: Powder Coated Aluminum Type: Mast Mount Box Dimensions: 5"H x 8"W x 17"L WT: 3.4 lbs UPC: 5060114790032 Quick Guide (pdf)

Read more less

12" x 9" Standard Performance Trim Tab Kit w/o Switch Kit- 12VUpgraded electro-polished trim blades with stouter 1/4" diameter hinge pin make these Performance Trim Tab Kits a cut above the base level Lenco Standard Mount Kits. Equipped with the same fast response electric actuators for precise control. Fully submersible with all Plug & Play Deutsch connections. Blades are Electro-Polished 12 gauge - 304 SS with 1" turned up edges (the 16" x 12" and the 18" x 14" have an 85 degree inside taper) and 1/4" diameter hinge pin. Kit includes Standard Actuators with 5/16" SS bolts. The actuators mount at the trailing edge of the bladesKit Contents: 2 each of 12-gauge stainless steel Electro-Polished trim tab blades 2 each of #15054-001 actuators with 6' lead and Deutsch plugs 2 each of #30133-103 20' actuator extension wiring harnesses 2 each of #15085-001 (#116) upper mounting bracket with gland seal    2 each of #50014-001 (#119) lower mounting bracket  1 each of the Lenco owner’s / installation manual All necessary stainless steel mounting hardware Specifications: Suggested Boat Length: 16' to 26' Length of Tab: 12" Width of Tab: 9" Minimum Transom Height: 11" Blades: 12 Gauge Stainless Steel Finish: Electro-Polished Switch Kit: Sold Separately Class: Fuel Efficient Compliance: CE Certified Compatibility: Any Boat Actuators: 12-volt WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Brochure (pdf)

Read more less

Actuator Lower HingeWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

2-Piece Chair Slide Rails - Bent HandleFeatures: Stainless steel slide rails are available as a 2-piece set With a bent handle Includes 1-1/8″ mounting studs. Slide rails travel 6″ fore and aft. Warranty: 5 Years WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Plug-In 9" Round Base for 2-3/8" Post9″ Round Base With 8″ Round Hole Pattern. Satin Finish, High-Strength Aluminum. Below The Deck Mount, Requires 3-3/4″ Hole In Deck. Use With Any 2-3/8″ Plug-In Post (sold separately).WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Taper-Lock 9" - Aluminum - Round BaseFeatures: 9″ Round Base With 8″ Hole Pattern High-Strength Aluminum To Withstand All Conditions Below The Deck Mount Requires A 3-1/2″ Hole In Deck Use With Any Taper-Lock™ Post (sold separately) WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Rudder Angle Sensor f/ Dual StationTechnical Specifications: Measurement Range - 45° - 0 - 45° Signal Analogue - 1.5 - 90 Ohm Resistance value -  1.5 - 90 Ohm - 2 Gauges  Operating Voltage - 6 - 24 Volt DC Communication - Analog Wire - 2 Wire system Sensor Signal - Insulated Return *Sold as an Individual WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Color: White Box Dimensions: 3"H x 4"W x 6"L WT: 0.6 lbs UPC: 7640178725133

Read more less

KingPin™ 7" x 7" Stainless Steel Square Base (Threaded)KingPin™ 7" L x 7" W Satin Stainless Steel Threaded Square Base with Nylon Bushing for 1-3/4" D Post (1630001) by Springfield Marine. Springfield Marine knows that comfort is important in marine seating. Whether behind the wheel for long passages in rough water; dropping a line in a quiet creek; or anywhere in between, Springfield Marine offers a wide range of configurations and options.Features: 7" x 7" stainless steel base, with nylon bushing and satin finish 4" cup depth below the deck Mount requires a 2-1/2" hole in the deck Built to provide secure, hassle-free boat seat mounting Specifications: Post Diameter: 1-3/4" Length: 7" Width: 7" Finish: Satin Material: Stainless Steel WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Seat Suspension SystemFeatures: High-Strength Aluminum Seat Mount Mounts to Deck Heavy-Duty Springs Provide a Comfortable Ride WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Flex TrimLength: 25'"A": 1/2""B": 5/8"Color: BlackTACO Metals supplies quality trim that is designed to protect boat interiors and exteriors from the harsh marine environment.Trim & MouldingTrim and moulding products provide finish, protection and structural integrity. TACO trim and moulding products are the best in the industry and are used extensively throughout boat interiors and exteriors.MaterialsDepending on the product line, TACO's trim and moulding products are offered in aluminum, vinyl and specially formulated rubber compounds. TACO insists on using prime billet 6000 series aluminum alloys to ensure superior structural strength, precise bending and long-lasting performance. Vinyl and plastic products are made from prime resin and warranted for 5 years. Covers unfinished edges and follows almost any contour or radius Made of flexible PVC Integrated interior aluminum clip and gripping tongue ensures a better fit This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Coiled Wash Down Hose - 25' - 1/2" DiameterFeatures: Parable with all Aqua Jet Washdown Pumps 25' hose length 1/2" hose diameter Specifications: Type: Tools & Accessories Box Dimensions: 5"H x 5"W x 18"L WT: 1.9 lbs UPC: 729321106153

Read more less