Boat Outfitting

Marine Kettle® Charcoal Grill - 15"Our time tested original charcoal Marine Kettle® grill now has a hinged lid.  Made in the U.S.A., it is meticulously crafted of 100% 18-8 mirror polished stainless steel for maximum corrosion resistance.  Our rotating design allows you to determine which direction you would like the lid to open when grilling in windy conditions. You obtain perfect results through use of the adjustable height cooking grill and the variable temperature control draft door assembly.  Our Marine Kettle® design allows oven type baking to enhance the grill flavor while retaining the natural juices of the food.  It will cook more food faster, on less grill area, than any other charcoal grill.  Safety and efficiency are obtained by closing the draft door and extinguishing the coals for future use. Magma’s large selection of mounting options and accessories allows you to customize your grill for your specific on-board or on-shore application.  *Mount not included. Features: Heat resistant "Stay Cool" plastic handle with air cooled supports Perfectly balanced hinged lid, won't slam shut Adjustable height cooking grill and variable draft door assembly, for superior temperature control Lower charcoal grate and sealed ash compartment Technical Specifications: Material - 18-8 mirror polished marine grade Stainless Steel Mounting Application - Marine Kettle® Mounts Primary Cooking Grate - 15" (38.1 cm)  Total Cooking Area - 177" Sq. In. (1141.9 sq. cm) Dimensions w/valve attached and lid/legs closed (L x W x H) - 14-7/8" x 14-7/8" x 11" (37.8 x  37.8 x 27.9 cm) Weight - 7.92 lb (3.6 kg) Fuel Type - Charcoal *Sold as an Individual Quick Guide (pdf)Owner's Manual (pdf)

Read more less

Sender Fuel Level (American 8"-16") (Single)Features: 8 to 16 in. Fuel Level Sending Unit 8 in. to 16 in. tank depth Single station For use with US OHM scale gauges This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

9"x12" STD Trim Tab Kit with Pro Control™ AutoSpecifications: Length x Width: 9"x12" Boat Length: 16'-25' Hinge Height: 2" (5.1cm) Minimum Transom Height: 14" (35.6cm) Keypad: Auto Kit Includes: (1) Pro Control Auto Keypad Kit (15174-107) (1) Pro Control Auto IMU (15180-001) (2) 12-gauge 304 (2.7 mm) stainless steel standard finish blades: Standard blades - with a 5/8" (1.6 cm) flared trailing edge. Edge Mount blades - with 1" (2.5 cm) turned-up edges a 5-degree taper on both sides to the trailing edge) and a 1/8" (3.2 mm) diameter hinge pin. (2) 2.25” Stroke SD Pro Actuators, 11.5” pin to pin (15189-001) (6) Micro C Tee Connector (30267-001DD) Micro C Power Cable with Fuse and Ground (15197-101) (2) 6’ (1.82 m) Micro C Drop cables (15199-101), (1) 15’ (4.57 m) (30269-001 and (1) 25’ (7.62 m) (30269-004) Micro C Drop cables (2) 6 Pin Deutsch to Micro C Actuator Network Adapter Cable (30377-001) (2) 3' (.91 m) Pro Control Actuator Power Pigtail (30378-001) (1) Wake Signal Adapter for Non-Mercury Systems (15207-101) (2) Corrosion proof Upper Mounting Brackets with gland seal (15193-101) (2) Corrosion-proof Lower Mounting Brackets (15194-101)

Read more less

Pro Stand-Up Seat - Mossy Oak CamoBicycle Style Seat Comes With Foam Padding Covered In Marine Grade Vinyl. Plastic Substrate; No More Wood To Rot Out! Compact Design Allows For More Room When Standing UpTo Fish. Whether You Sit Or Lean Against This Seat, It Provides Comfort And Stability.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Fish Pro High Back Folding Seat - WhiteExceptional high back contour lumbar cushion cradles your back for maximum support. Designed for style, comfort and durability. Features: Folds down easily Concealed pinch proof hinge Optional armrest can be added (sold separately) WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

7" Non-Locking Swivel Base - Stainless SteelFeatures: 6-3/4″ Square x 1-1/8″ High, With 4 Hole Mounting Pattern 0-Degree Non-Locking Swivel Rotates 360° Mild Steel E-Coat Finish  WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Pigtail Adapter Plus104SPPProduct Features: Plus version of the 104A with LED power indicator light 30A 125V locking female to 15A 125V male with locking screw Boat Side: Female Connector 30A 125V Locking w/Sealing Collar System Attaches to boat inlet or cordset Dock Side: Male Plug 15A 125V Locking Attaches to dockside receptacle or cordset WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Pigtail Adapter Box Dimensions: 4"H x 7"W x 12"L WT: 1.55 lbs UPC: 093344304675 Quick Guide (pdf)Brochure (pdf)

Read more less

3/8" Barrier Lined B1-15 EPA Compliant Outboard Fuel Line Hose - Gray - Sold by the FootThis hose is built with the best fuel and age-resistant formulations and a unique "Barrier Liner" on the inside surface of the tube, so the fuel is not in direct contact with rubber. This greatly reduces fuel permeation and prevents ethanol degradation of the rubber tube, which can cause small pieces of rubber to reach and damage the engine. That is particularly important considering the prospect of higher ethanol blends (E-15) available at gas stations next year. Features:  Sold by the Foot Provides extraordinary resistance to fuel permeation, aging, heat, cold, and ozone   Also, provides excellent rope-like bend-ability and fitting retention For both gasoline (including ethanol blends up to E85) and diesel (including bio diesel blends up to 100%) EPA Certified and CARB Executive Order for low permeation Type B1-15 NMMA Type Accepted & CE certified Applications: Marine Fuel Hose for distribution, return, vent and transfer For all marine fuels including gasoline, alcohol blends (CE-10), diesel and bio-diesel Construction: Tube: Fluoroplastic Internal Barrier Cover: Gray CPE Rubber Reinforcement: 2-Spiral Polyester Plies  Temperature Range: -20°F to 212°F (-28ºC to 100ºC) Specifications: Inner Diameter: (inch) 3/8" / (mm) 9.50 Outer Diameter: (inch) 0.588 / (mm) 14.9 Burst Pressure: (psi) 175 / (mpa) 1.21 Working Pressure: (psi) 35 / (mpa) 0.24 Bend Radius: (inch) 4" / (mm) 101.6 Weight: (lb/100 ft.) 10.5 / (kg/m) 0.156 Permeation Rate (Standard is (15g/m^2/24hrs (CE10)): 5.0 *The #305 series exceeds ABYC H-24, SAE J1527, ISO 8469 B1, USCG Type B1-15This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: ID Diameter (inches): 3/8" Length (Feet): Sold By The Foot Box Dimensions: 1"H x 1"W x 12"L WT: 0.13 lbs Quick Guide (pdf)

Read more less

Embossed 4-Piece Step Kit - MochaGreat for slippery trailer fenders, steps, and boat ladders  SeaDek Step Kits are made from 5mm thick PE/EVA blended foam material.  Each kit comes with four (4) pieces of soft yet durable, non-absorbent PE/EVA blended foam material that provides excellent traction when wet or dry.  Step kits are backed with a 3M pressure-sensitive adhesive to provide an easy peel-and-stick application.Technical Specifications: Dimensions (L x W x Thickness) - 12.75" x 3.75" x .2" Color - Mocha Material - Closed cell foam *Sold as an Individual

Read more less

Yamaha 200-250HP Anode KitContents: (1) 01112 (1) 01124 Material: ZincPackaging: Polybag Specifications: Material: Zinc Box Dimensions: 3"H x 4"W x 8"L WT: 3.6 lbs UPC: 8033837069447 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

Water Temperature Sensor - M14x1.5 Thread - 120°C Temp RangeThese resistive temperature sensors are built in a housing of brass. All sensors come with a sensor output and an insulated ground pin. The two connections are interfaced through the metal plate connectors. The sensors can be applied in a wide field of applications.Features: Function - Oil temperature, coolant temperature Length - 28.5mm (1-1/8") Thread - M14x1.5 Calibration - 120°C Measurement Range - 120°C Output Signals - Resistive IP67 Insulated ground pin Quick Guide (pdf)

Read more less

Deck Mount Stabilizer KitUse this to stabilize your Force® Kraken Trolling motor when in the stowed position.

Read more less