Boat Outfitting

XL 12" Set Back Electric Jack Plate with Smart Control - White CerakoteThe IMPULSE brand represents a fundamental shift in the way we think about Jack Plates. Purposefully designed, with features for both the modern angler and the performance junkie, the IMPULSE brand is about to make some serious waves in the Jack Plate market.IMPULSE Jack Plates are all electric which means they are cleaner, greener, and more energy-efficient than their hydraulic counterparts.  They also won't bleed down and require no messy fluids or hoses!The IMPULSE features a modular design which creates a more open area for mounting without the need for setback spacers.Unlock the true potential of your IMPULSE Jack Plate without out SMART Control Kit which adds an incredible set of features including a Smart Remote that doubles as a digital gauge! Display - The IMPLSE Smart Remote utilizes a SHARP® Memory In a Pixel LCD. Embedded, 1-bit memory in every pixel allows for an always-on display that leverages ambient light to create a high-contrast, high-resolution image in all light conditions. MEMORY BUTTONS - The Smart Remote allows the user to program up to 3 precise memory positions that can be triggered with the push of a button.  This allows you to keep your hands off your jack plate control and back on the wheel as much as possible. TRAILER BUTTON - Another industry-first: a 4th programmable button installed on the frame of the jack plate, allowing you to put your jack plate at the perfect trailering height without having to climb back in the boat. Rated for outboards up to 450HP Owner's Manual (pdf)

Read more less

Elastomeric Marine Sealant - 10oz Cartridge - WhiteA one-part, fast skinning (10 minutes) and fast curing (24 hours) multi-purpose marine grade sealant with superior strength, adhesion, elongation and life characteristics. Cures in temperatures of -20°F (-28.9°C) to 120°F (48.9°C) and can be wet sanded and painted after curing. Flexibility and compression capabilities are excellent. Heavy duty use above or below the waterline. Twists, bends, expands, compresses. Seals ports, beds hardware, stops leaks. Resistant to teak cleaners, oil, diesel fuel and salt water. Adheres tenaciously without primers to fiberglass, glass, plastic, metal and wood. Simple clean up with mineral spirits. Not recommended for wooden deck seams or use in areas subject to gasoline.WARNING: This product can expose you to chemicals including Toluene which is known to the State of California to cause birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Automatic Bilge Cleaner - QuartHeavy duty, concentrated formula. Protects hull from costly deterioration. Dissolves, emulsifies and combines grease, oil and scum with bilge water. Automatically reaches difficult places with the roll of the boat. Kills bilge odor; saves scrubbing time. 98% biodegradable earth-friendly formula. Specifications: Type: Bilge & Holding Tank Box Dimensions: 2"H x 5"W x 12"L WT: 2.3 lbs UPC: 898286002036

Read more less

Mildew Cleaner & Stain RemoverFantastic mildew cleaner and stain remover. Only double-action mildew product for boaters. Not only removes ugly mildew stains, but also cleans and restores soiled areas. Great on all mildew prone areas Specifications: Type: Mildew & Moisture Box Dimensions: 3"H x 5"W x 11"L WT: 2.6 lbs UPC: 898286002135

Read more less

Single Stainless Steel Drink Holder - Vertical MountEdson Single Stainless Drink Holder - Vertical Mount is great for mounting to the side of your bulkhead, center console or any vertical location on your boat! With the right amount of space for any drink that can fit inside of a koozie, each drink holder is designed to keep your cup, bottle or favorite coffee mug in place.

Read more less

Stainless Clutch HandleUpgrade your older Edson controls with these stainless replacements. Highly polished, marked “Fwd-Rev”. Can be easily retrofitted onto existing Edson engine controls. Includes mounting screw.IMPORTANT: *These handles are only for Edson's Dual Lever Engine Controls. Older pedestals (pre-1980) with 10-32 set screw threads must be retapped to 1/4"-28 in order to accept the mounting screws supplied with these handles.

Read more less

Starlink High-Performance Flat Dish Mounting PlateEdson's Starlink mounting plate allows you to mount a High-Performance Flat Dish to our Vision Series mounts. Choose the Starlink plate as "Step 2" in our 3-step Vision Series system and you're on your way.Powder-coated white matches the Vision Series line, including mounting hardware and Tef-Gel thread protectant.*For High-Performance Flat Dish mounting only. **For Dish pole mounting, please see Edson part # 68881

Read more less

Horizontal Rail Accessory Mount - 3" DiskEdson’s Stainless Horizontal Rail Accessory Mount puts your hand-held GPS securely and conveniently within reach on your Steering Pedestal Guard. With its 3" Disk Platform you can mount your GPS hand held or other items that need a secured place to stay.Designed to attach to all 1”, 1-1/8” and 1-1/4” pedestal guard tubes by clamping the two pieces together around the guard tube without the need for removal of the tubes or any existing wiring.

Read more less

Molded Compass Cylinder - WhiteEdson’s Compass Cylinders are distinctive, non-reflecting, and virtually indestructible. Great for new boats or upgrading your existing pedestal to a larger, easier to read compass. Fits Edson’s 335 and 336 pedestals, stands 5-1⁄2” high and accommodates flush mounted compasses up to a 6-7⁄8” flange diameter.

Read more less

Light Arm for Open Array RadarsEdson's 68660 Vision Series Light Arm allows you to attach your Navigation Light to your Edson Vision Series Mount with a Open Array Radar. Light Arm extends 28" toward the stern allowing room for your Radar or Satellite Dome. The Light Arm is 28" tall, which meets Coast Guard standards for navigation lights.Edson's Light Arm requires a Light Arm Receiver that is dependent on the style of Vision Series Mount you have (Aft Angled or Vertical). Specifications:Mounting Plates and Light Arm Receiver are required to complete an Edson Vision Series Mounting System. (sold separately)Base mounts sold separately Specifications: Type: Light/GPS Brackets Box Dimensions: 3"H x 32"W x 33"L WT: 5.2 lbs UPC: 796744686609 Quick Guide (pdf)

Read more less

Furuno & Sitex Mounting PlateWith Edson's Vision Series Mounting System, you can select your desired Mounting Plate to best fit your electronics. Edson's 68510 Vision Series Mounting Plate is designed for both SiTex 2kw, 4kw Radar Domes (T-2041, MDS-9, MDS-8, MDS-1, T-941, T-921, T-761, T-760) and  Furuno 2kw, 4kw Radars (15", 18”, 19” and 24" Domes and 3.5’ & 4' Open Arrays). Specifications:Mounting Plates are required to complete an Edson Vision Series Mounting System. Base mounts sold separately Specifications: Type: Adapters Box Dimensions: 1"H x 16"W x 16"L WT: 2.5 lbs UPC: 000007967443 Quick Guide (pdf)

Read more less

Light Arm for Radar Domes and Sat DomesEdson's 68650 Vision Series Light Arm allows you to attach your Navigation Light to your Edson Vision Series Mount with a Radar Dome and Satellite Dome. Light Arm extends 14" toward the stern allowing room for your Radar or Satellite Dome. The Light Arm is 28" tall, which meets Coast Guard standards for navigation lights.Edson's Light Arm requires a Light Arm Receiver that is dependent on the style of Vision Series Mount you have (Aft Angled or Vertical). Specifications:Mounting Plates and Light Arm Receiver are required to complete an Edson Vision Series Mounting System. (sold separately)Base mounts sold separately Specifications: Type: Light/GPS Brackets Box Dimensions: 1"H x 16"W x 42"L WT: 3.1 lbs UPC: 796744686500 Quick Guide (pdf)

Read more less