Boat Outfitting

Mast MountsStill the first choice for boat owners the world over, Scanstrut Mast Mounts are the ultimate solution for mounting radars on yachts masts.Raising the antenna clear of any obstructions or interference, the mast mount is a classic and reliable installation.Features Easy and quick to install with all fastenings supplied Attached to mast by four swivel feet matching the profile of any mast 12 point fixing using highest quality Monel rivets for a secure installation Nylon washers for all fastenings to protect paint finish Waterproof cable grommet included to seal cable entry into mast Materials Marine grade 6082 aluminium Polyester powder coated for a durable and gloss white finish Kit includes 1 x Mast Mount 4 x Swivel mounting feet 1 x Complete fastening pack Fits:Furuno models: 1712,1715,1721,1722,1723,1724,1823,1824,DRS2DLowrance model: LRA 1500 Specifications: Construction: Powder Coated Aluminum Type: Mast Mount Box Dimensions: 5"H x 8"W x 17"L WT: 3.4 lbs UPC: 5060114790032 Quick Guide (pdf)

Read more less

12" x 9" Standard Performance Trim Tab Kit w/o Switch Kit- 12VUpgraded electro-polished trim blades with stouter 1/4" diameter hinge pin make these Performance Trim Tab Kits a cut above the base level Lenco Standard Mount Kits. Equipped with the same fast response electric actuators for precise control. Fully submersible with all Plug & Play Deutsch connections. Blades are Electro-Polished 12 gauge - 304 SS with 1" turned up edges (the 16" x 12" and the 18" x 14" have an 85 degree inside taper) and 1/4" diameter hinge pin. Kit includes Standard Actuators with 5/16" SS bolts. The actuators mount at the trailing edge of the bladesKit Contents: 2 each of 12-gauge stainless steel Electro-Polished trim tab blades 2 each of #15054-001 actuators with 6' lead and Deutsch plugs 2 each of #30133-103 20' actuator extension wiring harnesses 2 each of #15085-001 (#116) upper mounting bracket with gland seal    2 each of #50014-001 (#119) lower mounting bracket  1 each of the Lenco owner’s / installation manual All necessary stainless steel mounting hardware Specifications: Suggested Boat Length: 16' to 26' Length of Tab: 12" Width of Tab: 9" Minimum Transom Height: 11" Blades: 12 Gauge Stainless Steel Finish: Electro-Polished Switch Kit: Sold Separately Class: Fuel Efficient Compliance: CE Certified Compatibility: Any Boat Actuators: 12-volt WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Brochure (pdf)

Read more less

Plug-In 9" Round Base for 2-3/8" Post9″ Round Base With 8″ Round Hole Pattern. Satin Finish, High-Strength Aluminum. Below The Deck Mount, Requires 3-3/4″ Hole In Deck. Use With Any 2-3/8″ Plug-In Post (sold separately).WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Taper-Lock 9" - Aluminum - Round BaseFeatures: 9″ Round Base With 8″ Hole Pattern High-Strength Aluminum To Withstand All Conditions Below The Deck Mount Requires A 3-1/2″ Hole In Deck Use With Any Taper-Lock™ Post (sold separately) WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

KingPin™ 7" x 7" Stainless Steel Square Base (Threaded)KingPin™ 7" L x 7" W Satin Stainless Steel Threaded Square Base with Nylon Bushing for 1-3/4" D Post (1630001) by Springfield Marine. Springfield Marine knows that comfort is important in marine seating. Whether behind the wheel for long passages in rough water; dropping a line in a quiet creek; or anywhere in between, Springfield Marine offers a wide range of configurations and options.Features: 7" x 7" stainless steel base, with nylon bushing and satin finish 4" cup depth below the deck Mount requires a 2-1/2" hole in the deck Built to provide secure, hassle-free boat seat mounting Specifications: Post Diameter: 1-3/4" Length: 7" Width: 7" Finish: Satin Material: Stainless Steel WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Seat Suspension SystemFeatures: High-Strength Aluminum Seat Mount Mounts to Deck Heavy-Duty Springs Provide a Comfortable Ride WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Flex TrimLength: 25'"A": 1/2""B": 5/8"Color: BlackTACO Metals supplies quality trim that is designed to protect boat interiors and exteriors from the harsh marine environment.Trim & MouldingTrim and moulding products provide finish, protection and structural integrity. TACO trim and moulding products are the best in the industry and are used extensively throughout boat interiors and exteriors.MaterialsDepending on the product line, TACO's trim and moulding products are offered in aluminum, vinyl and specially formulated rubber compounds. TACO insists on using prime billet 6000 series aluminum alloys to ensure superior structural strength, precise bending and long-lasting performance. Vinyl and plastic products are made from prime resin and warranted for 5 years. Covers unfinished edges and follows almost any contour or radius Made of flexible PVC Integrated interior aluminum clip and gripping tongue ensures a better fit This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

CP 325 Medium-High Adhesion Masking Tape - 18MM x 55M x 12-Pack - Pink - Rated for 325°FPerformance grade, medium-high adhesion masking tape for use in moderate temperatures in the transportation and metal fabrication industries. For use in temperatures up to 325 F (for up to 30 minutes), FrogTape® 325 Pink is a user-friendly, durable solution that delivers sharp paint lines, clean removal, and consistent unwinding in various industrial applications and environments.Features: Excellent adhesion to metal, rubber, plastic, anodized aluminum, chrome and fiberglass Resistant to water, salt water, various solvents and abrasives Compatible with gel coats, multi-part epoxy topcoats, and antifouling bottom paints for marine applications, as well as solvent-based and waterborne, aqueous paints and coatings for automotive Resistant to water, various solvents and gel coats Residue-free removal Temperature-resistant up to 325 F (for up to 30 minutes) Remove tape at room temperature (70 F +/- 10 F) after baking Technical Specifications: Tape Width - 18MM (.70") Roll Length - 55M (60 yds) Adhesive - Rubber-based adhesive Adhesion to Stainless Steel - 34 oz/in width Elongation - 12% Service Temperature Range - 40°F to 325°F (up to 30 minutes) Tensile - 25 lbs/in width Thickness - 6.4 mils Quick Guide (pdf)Brochure (pdf)

Read more less

CP 250 Medium-High Adhesion Masking Tape - 24MM x 55M x 12-Pack - Light Blue - Rated for 250°FPerformance grade, medium-high adhesion masking tape for use in moderate temperatures in the transportation and metal fabrication industries. For use in temperatures up to 250 F (for up to 30 minutes), FrogTape® 250 Light Blue is a user-friendly masking solution that delivers consistent paint lines, clean removal, and conformability in various industrial applications and environments.Features: Excellent adhesion to metal, rubber, plastic, anodized aluminum, chrome and fiberglass Resistant to water, salt water, various solvents and abrasives Compatible with gel coats, multi-part epoxy topcoats, and antifouling bottom paints for marine applications, as well as solvent-based and waterborne, aqueous paints and coatings for automotive Resistant to water, various solvents and gel coats Residue-free removal Temperature-resistant up to 250 F (for up to 30 minutes) Remove tape at room temperature (70 F +/- 10 F) after baking Technical Specifications: Tape Width - 24MM (.94") Roll Length - 55M (60 yds) Adhesive - Rubber-based adhesive Adhesion to Stainless Steel - 32.5 oz/in width Elongation - 10% Service Temperature Range - 40°F to 250°F (up to 30 minutes) Tensile - 24 lbs/in width Thickness - 6.2 mils Quick Guide (pdf)Brochure (pdf)

Read more less

XKA Aluminum Alloy Trim Tab - 12 x 12The Lectrotab Aluminum Alloy trim tabs are uniquely designed to meet the needs of Aluminum hulled boats and are an economical option for all boats.  All Aluminum Alloy tabs are fabricated with an extremely strong "no-break" polypropylene hinge.  All Aluminum tabs are sealed with a corrosion resistant epoxy coating. Combined with a precision-engineered actuator, this kit is built to combine quiet operation with a non-hydraulic, maintenance free design.  The unit is corrosion free, ensures very accurate tab positioning, provides maximum lift force, and is totally self-contained for easy installation.  The actuator assembly is packaged in a non-metallic permanently sealed housing.  No components need to be installed inside the boat. Most importantly, unlike hydraulic trim tabs, there is no oil to leak out.  The actuator incorporates either a standard or low profile transom mounting bracket. *Control switch not included Features: All Tabs sealed with a corrosive resistant epoxy coating Equivalent strength to 10 gauge stainless steel "No Break" polypropylene hinge tested over 300,000 cycles to a 90° bend without failure Upper ram seal location cannot be damaged due to fouled ram or barnacle growth Utilizes internal pressure equalization system Internal brake system prevents unwanted tab movement when under way or backing down Quiet operation Actuators are fully load tested to push 1000 lbs of force Non-metallic external structure which cannot corrode and will not deteriorate in the sun or under water Technical Specifications: Trim Tab Size (L x W) - 12" x 12" (30 x 30 cm) Boat Length - 18' to 32' (5.5 to 9.5 M) Trim Tab Material - Marine grade 6005-T5 Aluminum Alloy  Actuator DC Voltage - 12 V Actuator Stroke Length - 2.25" (57 mm) Actuator Cable Length  - 23' (7 M) Actuator Vertical Height - 11.875" (302 mm) In the Box: Two (2) Aluminum Alloy tabs Two (2) actuators w/23' (7 M) cables Instruction Manual  *Sold as an Individual This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Actuator Type: Electro-Mechanical Construction: Aluminum Alloy Box Dimensions: 6"H x 15"W x 15"L WT: 15.1 lbs UPC: 850046155567 Quick Guide (pdf)Owner's Manual (pdf)Brochure (pdf)

Read more less

Engine Oil Temperature Sensor - M16x1.5 Thread - 150°C Temp RangeThese resistive temperature sensors are built in a housing of brass. All sensors come with a sensor output and an insulated ground pin. The two connections are interfaced through the metal plate connectors. The sensors can be applied in a wide field of applications.Features: Function - Oil temperature, coolant temperature Length - 28.5mm (1-1/8") Thread - M16x1.5 Calibration - 150°C Measurement Range - 150°C Output Signals - Resistive IP67 Insulated ground pin Quick Guide (pdf)

Read more less

Activator - 60mlPart of a two-component 4:1 etching primer. Once mixed with the PropOne Primer Coat, the Primer chemically dries to protect metallic surfaces against corrosion and allow adhesion of the PropOne Clear Coat. Suitable for ferrous & non-ferrous metals.NOTE: This product is the PropOne Primer Activator only. Other components are sold separately.PropOne is a non-toxic foul-release coating that prevents sea life from adhering to propellers and underwater running gear.  It is used on thousands of boats worldwide every year, with a proven track record of over 8 years. Non-stick, super slick coating that lasts 1-2 years in water! It works, it’s the one. No.1 Foul release coating for propellers and running gear. Proven season after season to keep your propellers and running gear clean. PropOne is used on many thousands of boats worldwide every year, with a proven track record of over 8 years.

Read more less